To anyone struggling with springs... Paracord and a 2x2 is the answer. you can wrap the paracord around a 2x2 under the headers to use as leverage to pull springs down, wrapping as you go. One the springs are pulled down far enough you can use a long screw drive to guide the hook in before releasing tension from the 2x2. NOTE!! BE CAREFUL of the knock sensors. Easy to break when pulling the headers.
Here is The TRUE Savior YaH The Heavenly FATHER HIMSELF was Who they Crucified for our sins, NOT jesus, and “HERE IS THE PROOF” From the Ancient Semitic Scroll: "Yad He Vav He" is what Moses wrote, when Moses asked YaH His Name (Exodus 3) Ancient Semitic Direct Translation Yad - "Behold The Hand" He - "Behold the Breath" Vav - "Behold The NAIL"
I have to thank you so much for this amazing video. I was able to install my headers with no issues. My first cold start was insane. Keep up the great job. Absolutely appreciate all the hard work you but into this video.
Here is The TRUE Savior YaH The Heavenly FATHER HIMSELF was Who they Crucified for our sins, NOT jesus, and “HERE IS THE PROOF” From the Ancient Semitic Scroll: "Yad He Vav He" is what Moses wrote, when Moses asked YaH His Name (Exodus 3) Ancient Semitic Direct Translation Yad - "Behold The Hand" He - "Behold the Breath" Vav - "Behold The NAIL"
You are damn awesome mate . Every day I jump to youtube just to see the new video cuz you are genuine and honest you are not like so many youtubers which is obvious they are under the payroll of the manufacturers 😎Like a boss😎
Finished up the install on my bike hardest part had to be putting the 2 hangers in the middle of the headers lol Although the job was a little challenging saved myself $500 bucks by not paying the shop to do it haha
Really like to know why arrow say not to tighten header bolts first, I would say do that as it won’t likely have any affect except make it a hell of a lot easier
@@CaliMotoTV I was just about to ask why you didn't install them, lol. Yep, we need that video bro. Or maybe a quick exp. On why you decided not to run them?
Great job! If I only want to remove the servo (not replacing for full exhaust nor tuning the bike), do I have to use a servo buddy ? Or can I only remove the cables and putting the stock servo back as you did ?
Guys, Here is The TRUE Savior YaH The Heavenly FATHER HIMSELF was Who they Crucified for our sins, NOT jesus, and “HERE IS THE PROOF” From the Ancient Semitic Scroll: "Yad He Vav He" is what Moses wrote, when Moses asked YaH His Name (Exodus 3) Ancient Semitic Direct Translation Yad - "Behold The Hand" He - "Behold the Breath" Vav - "Behold The NAIL"
About the arrow headers and found i’m having issues with lining up the headers to the flange it’s like the cylinder 4 header is about a half inch off but anything i do does work any advice? I also was able to connect 3 just not all 4
Hi Bill, please tell me what did you do to keep the warranty after replacing the exhaust and headers. My Houston area bmw dealers are telling me that my warranty on my 2024 S1k will be voided if I change the exhaust and the headers.
Ok…. So many questions Im going to resume it as much. I have a S1000R 2022 like yours and I am planning on buying the aftermarket full exhaust however my worries are the computer and the sensors will my dash have all kinds of alarms going off.. Do I need to take it to the dealer or will it recognize the new full exhaust?? Will they give me hard time at dealer warranty related or so?? Thank you much and thanks for all you do we are fans of your videos.. Thanks Nestor
Hello, I would like to know if a complete Austin race system can be installed on the motorcycle. I have the same bike as yours but on the Austin page it appears available only for the RR model. Do you know if it is the same or is it useful for the R? thanks and good job.
I'm looking for answers about remapping after switching to a full exhaust on the 2022/2023 S1000Rs. My previous attempt to upgrade to the Akrapovic Full Exhaust System, along with BT Moto Performance Calibration, resulted in an unrideable first gear, requiring me to feather the clutch. Despite seeking help from both BT Moto and the shop I used, the issue persisted. Is it possible to avoid software adjustments after upgrading to a full exhaust? Furthermore, I'm curious about any potential negative impact on the motorcycle's performance from riding without a remap or retune. If there are any adverse side effects, what's the safest method of remapping to optimize engine performance while avoiding any potential issues?
Hello bill! I follow every step you showed in the video however the engine light is now displayed on the cluster with some error codes! Could you please help me sort it out! Thank you
This system will not fit a 2018. Websites typically have all the specs what fits for which model year bikes, it's pretty straight forward to figure out.
Is the Arrow headers to avoid the $4,000 price tag for the SC full system? If so, im going to do that! And do you just need an ECU flash? or a dyno tune?
Yes. To allow movement & proper alignment of entire exhaust system as a whole. If you torque flanges first they won’t be aligned & possibly have exhaust leak.
What size Tite Reach did you use? 1/4" or 3/8"? I'm about to install a M1000RR stock titanium Akra and noticed that there's a pretty large dimension difference between the 1/4" & 3/8" Tite Reach socket extensions, I don't want to get the larger and not be able to reach the nuts!
@@CaliMotoTV Cool, I'm pretty sure I would have remembered if you did, but at the same time I was like "It's Bill, surely he did that already?". I wouldn't expect anything less.
@@CaliMotoTV Considering I've watched every video ever made on this channel at least once, and some more than that, and there's been "a few" bikes passing through it can get a bit muddled :P
A) How long will you keep your bike? B)Is seeing the metal turn blue worth 7-900 dollars? For me-- I don't keep my bikes more than a couple of years at most and I could care less of the metal turns blue--- so for me not worth it.
Sorry to clarify, we do support Arrow and recommend contacting Motomillion.com for Arrow products, the muffler manufacturer we do not support or recommend
What a pain in the butt of a design.. I would skip the whole bike entirely. Note to self. Plus the cops here in so cal are cracking down on Catless exhaust, cars and bike.
To anyone struggling with springs... Paracord and a 2x2 is the answer. you can wrap the paracord around a 2x2 under the headers to use as leverage to pull springs down, wrapping as you go. One the springs are pulled down far enough you can use a long screw drive to guide the hook in before releasing tension from the 2x2. NOTE!! BE CAREFUL of the knock sensors. Easy to break when pulling the headers.
Didn’t even flinch when the headers fell lol, I like it 🤣🤣🤣
Here is The TRUE Savior
YaH The Heavenly FATHER HIMSELF was Who they Crucified for our sins, NOT jesus, and “HERE IS THE PROOF”
From the Ancient Semitic Scroll:
"Yad He Vav He" is what Moses wrote, when Moses asked YaH His Name (Exodus 3)
Ancient Semitic Direct Translation
Yad - "Behold The Hand"
He - "Behold the Breath"
Vav - "Behold The NAIL"
And Motojitsu BE THY NAME.
Watch out brother. No hope, without dope! The Preacher must have missed his.......
I have to thank you so much for this amazing video. I was able to install my headers with no issues. My first cold start was insane. Keep up the great job. Absolutely appreciate all the hard work you but into this video.
Absolutely diabolical not having a part where you start it up and hear the sound at the end 😂
Good video tho. Very informative.
Bill lots of respect for you. Not only you know how to ride but also an excellent mechanic.
Here is The TRUE Savior
YaH The Heavenly FATHER HIMSELF was Who they Crucified for our sins, NOT jesus, and “HERE IS THE PROOF”
From the Ancient Semitic Scroll:
"Yad He Vav He" is what Moses wrote, when Moses asked YaH His Name (Exodus 3)
Ancient Semitic Direct Translation
Yad - "Behold The Hand"
He - "Behold the Breath"
Vav - "Behold The NAIL"
Twisting the hell out of o2 sensor says otherwise.
You are damn awesome mate .
Every day I jump to youtube just to see the new video cuz you are genuine and honest you are not like so many youtubers which is obvious they are under the payroll of the manufacturers
😎Like a boss😎
Thank you so much. This means a lot 🙏
Thank you so much for the awesome video...2 springs were a PITA....I wish it would of taken me 30 min....more like 3 hrs...
Finished up the install on my bike hardest part had to be putting the 2 hangers in the middle of the headers lol Although the job was a little challenging saved myself $500 bucks by not paying the shop to do it haha
YES! Thanks for video! you the best!
What a brilliant video I don't useally leave reviews but followed this word for word and mananged the full install....... thanks for the video 👏👏
This probably saved me 2 hours on my 2022 s1k installing my Austin racing system.
Really like to know why arrow say not to tighten header bolts first, I would say do that as it won’t likely have any affect except make it a hell of a lot easier
Such a great video… you did a great job explaining
Man those springs kicked my ass
Yep 😬
when you re plugged in the servo didnt you get a warning on the dash?
Thanks guys this vid is a great help
Where did you bueno the fallaste?
Do You have the link?
super nice video very well explained.
Video helped me allot. Thanks man. Used a long spring puller. Made the job allot easier.
Nice! Thanks for watching 🙏
How long of a puller I’m struggling with mine 😅😅😅
@@Oneslowsi an absolute nightmare
@@Breezy.S1K I used a motion pro one and a yoshi 😂
Awesome video thank you so much.
Is it necessary to remap or not ?
You are doing a great job! Congrats. Thx!
Just fantastic info here Bill 😎🍻
Can you do a video for installing the block off plate for this bike?
Will do!
@@CaliMotoTV I was just about to ask why you didn't install them, lol. Yep, we need that video bro. Or maybe a quick exp. On why you decided not to run them?
@@chrisstarr4121 I didn't receive them in time the I had everything taken apart. I'll get them installed soon.
Hi, this video helps me a lot. Could I run the bike without tune or servo buddy? Any lights come out if I didn’t tune or install the servo buddy?
I fitted my own also but I disconnected all 4 of the O2 sensors. The little extra work was wort it to me to avoid twisting o2 sensor wires so much .
After taking the stock exhaust off myself on my 2022 s1000rr I don’t think i can go through this again with putting my new exhaust on 😂🤦🏻♂️
Would you recommend using a high temp silicone where the headers connect to the flanges?
Great job!
If I only want to remove the servo (not replacing for full exhaust nor tuning the bike), do I have to use a servo buddy ? Or can I only remove the cables and putting the stock servo back as you did ?
Yea can remove the cables and leave the servo plugged in. If you remove the servo completely it'll throw a cel
Guys, Here is The TRUE Savior
YaH The Heavenly FATHER HIMSELF was Who they Crucified for our sins, NOT jesus, and “HERE IS THE PROOF”
From the Ancient Semitic Scroll:
"Yad He Vav He" is what Moses wrote, when Moses asked YaH His Name (Exodus 3)
Ancient Semitic Direct Translation
Yad - "Behold The Hand"
He - "Behold the Breath"
Vav - "Behold The NAIL"
Wow thanks soooo much Bill. This video is so informative.
Do I get bonus points. I’m doing it on the shed floor. No ramp.
Definitely bonus points.
Hi tackling it now what type of socket did you use to get the header bolts off
Hello, I get an fault in the engine control. What can I do to remove the error? Can somebody help me?
Hey Bill.
I have 2021 bmw s1000rr
do exactly as you advise. point out any mistakes
Curious if you needed to use any kind of anti-seize on the header bolts/nuts?
Btw, I'll be doing my install on the ground. 😬🤞
Hey Bill! Do you know the torque spec for the headers? Greatly appreciated!
Hi and thanks for the good job, I am wondering how you could disconnect the servo without using a servo buddy??
Servo is still there. It thinks it's doing something but the wires are disconnected.
Is this the same for R's and RR's?
Hi bill your demo worked a treat. I just installed one on my 2022 s1000rr and an engine management light has come up can you advise?
You need a tune or servo buddy
Why didn't you assemble flange before putting it on the bike.
Great your doing this I have the M package bike.. I'm definitely copying this format.. bro.. thanks!!
@@CaliMotoTV thanks Bro..I've been watching the install all day..thinking that it's going to sound like a thunderstorm when opened up..
Do you recommend velocity stacks?
Why fit the headers that way? Would it be easier to build them inc springs on the bench and then fit?
About the arrow headers and found i’m having issues with lining up the headers to the flange it’s like the cylinder 4 header is about a half inch off but anything i do does work any advice? I also was able to connect 3 just not all 4
Hi Bill, please tell me what did you do to keep the warranty after replacing the exhaust and headers. My Houston area bmw dealers are telling me that my warranty on my 2024 S1k will be voided if I change the exhaust and the headers.
Aloha from Hawaii!!! What site do i need to get stainless full system exhaust for my 2020 BMW s1000 r? Everytime i check it says 2018 only
Hello, thank you very much for this video, can you tell me how many preload turns are the original at the front and at the rear, thank you in advance
Ok…. So many questions Im going to resume it as much.
I have a S1000R 2022 like yours and I am planning on buying the aftermarket full exhaust however my worries are the computer and the sensors will my dash have all kinds of alarms going off.. Do I need to take it to the dealer or will it recognize the new full exhaust??
Will they give me hard time at dealer warranty related or so??
Thank you much and thanks for all you do we are fans of your videos..
Thanks
Nestor
Hello, I would like to know if a complete Austin race system can be installed on the motorcycle. I have the same bike as yours but on the Austin page it appears available only for the RR model. Do you know if it is the same or is it useful for the R? thanks and good job.
Great job
Thanks 🙌
Can you fit the s1000r exhaust to the s1000rr?
When installing the aftermarket header is there gaskets?
I'm looking for answers about remapping after switching to a full exhaust on the 2022/2023 S1000Rs. My previous attempt to upgrade to the Akrapovic Full Exhaust System, along with BT Moto Performance Calibration, resulted in an unrideable first gear, requiring me to feather the clutch. Despite seeking help from both BT Moto and the shop I used, the issue persisted. Is it possible to avoid software adjustments after upgrading to a full exhaust? Furthermore, I'm curious about any potential negative impact on the motorcycle's performance from riding without a remap or retune. If there are any adverse side effects, what's the safest method of remapping to optimize engine performance while avoiding any potential issues?
Hi there, I'm Thomas and today we are watching pipes getting removed and new ones installed.
@@CaliMotoTV Hey, I've got to have some good qualities. :)
Do u need a exhaust servo buddy for s1000rr?
New assistant, eat that Jaret ;)
Hello bill! I follow every step you showed in the video however the engine light is now displayed on the cluster with some error codes! Could you please help me sort it out!
Thank you
You need to buy a Exhaust Servo Eliminator and plug It in the same place of original one of the bike. It's uses to turn off the engine light.
Hey Bill,
Have you changed the oil filter on your bike after the header install? Just wondering if the filter will pass by the headers?
Question. Why did you reinstall servo motor with a Bt Moto tune?
Wasn't sure if it needs to come off or not. It can and we just didn't have the time to remove it.
Hey, You do a great job with the exhaust 👍.
Do you know if 2022 S1000RR headers will fit a 2022 S1000R? I can’t get a straight answer from my dealership’s service department. Thanks, Bill!!!
No, won't fit.
@@CaliMotoTV thanks Bill!!!!!
so what part number for S1000R then? most pages i see list same part number for R and RR??
Is the exhaust (not the heaters)compatible with s1000xr 22?
great, very informative content
Thanks for watching 🙏
clean bike !
Wouldn’t be better to add a servo eliminator ? If they have one made for this model yet
If I'm brentuning stage two do I have to put servo back ?
No
Why no Bren tune velocity stacks?
If you install a full titanium exhaust, do you need to map or remap it or just install the exhaust and use it?
Highly recommend a tune
why does arrow have a diff part number for R vs RR now? any ideas?
Would you run a Dyno test after this is over? It would exciting to see new power gains.
The exhaust springs even with the screw drivers are so impossible for me
Do you need a tune to run aftermarket header?
The BMW has a self adjusting ecu. But it's highly highly recommended to tune it.
What lift are you using?
Hey Bill I have BMW s1000r 2018
I like to up RR exhaust system by any chance do you know which one it fits to mine
This system will not fit a 2018. Websites typically have all the specs what fits for which model year bikes, it's pretty straight forward to figure out.
Is the Arrow headers to avoid the $4,000 price tag for the SC full system? If so, im going to do that! And do you just need an ECU flash? or a dyno tune?
Yea trying to save some $, we didn't care it's not titanium. We recommend a flash at the very least. We went with Brent tune.
@@CaliMotoTV Do you happen to have a link to those headers? Cant seem to find them for the 22 RR :(
Wouldn't a modified coat hanger be the trick for the center ones? Come from the bottom.
Hey Bill, Great videos. Im having trouble finding a slip on for 2022 S1000r. Do the S1000rr slip ons fit?
Yes the 2020+ S1000RR fits... I'd recommend the Leo Vince pipe
@@CaliMotoTV Thanks so much.
why dont you do video about harley sportster s
Awesome
Hi BILL, thank you for the video !!!! I was watched/doing step by step and I was able to install the headers in my 2023 model. 👊😎
Is there any significant reason to not torque the flanges to the head before lining the pipes up and springload them in place?
Yes. To allow movement & proper alignment of entire exhaust system as a whole. If you torque flanges first they won’t be aligned & possibly have exhaust leak.
What size Tite Reach did you use? 1/4" or 3/8"? I'm about to install a M1000RR stock titanium Akra and noticed that there's a pretty large dimension difference between the 1/4" & 3/8" Tite Reach socket extensions, I don't want to get the larger and not be able to reach the nuts!
It's the 3/8 size. I also used a combination of extensions and swivels. Good luck
@@CaliMotoTV amazing thanks for the quick reply Cali 👌
I did same but i got check engine light 😑 s1000rr 2021
You need a servo buddy if you don't do the tune
Hi Bill, I have a question. Do i need to get a servo buddy if I get a full exhaust system?
If you're not going to tune it, yes you'll need a servo buddy. I recommend getting the bike bren tuned.
@@CaliMotoTV thanks for getting back to me Bill. Will keep the bren tuned in mind. Just took delivery of my S1000R and Im loving it.
Don't remember, did you already do high flow air filter to match the exhaust and tune?
@@CaliMotoTV Cool, I'm pretty sure I would have remembered if you did, but at the same time I was like "It's Bill, surely he did that already?". I wouldn't expect anything less.
@@CaliMotoTV Considering I've watched every video ever made on this channel at least once, and some more than that, and there's been "a few" bikes passing through it can get a bit muddled :P
Would you post a part number for us?
We'll add it into the description.
Arrow Part Number : 71718MI
Do you need anything extra?
Titanium vs stainless? I know the weight but is it worth 900$ difference?
A) How long will you keep your bike? B)Is seeing the metal turn blue worth 7-900 dollars? For me-- I don't keep my bikes more than a couple of years at most and I could care less of the metal turns blue--- so for me not worth it.
-If you manage to get this far it's time to grab some alcohol. -To wipe it down right? -Yeah, sure... :)
@@CaliMotoTV We mock the ones we love... or because we can :)
@@CaliMotoTV True, they aren't mutually exclusive.
Ouch... the exhaust.. and you said there are no bloopers!
:D :))
PS: As i have seen in others reviews....Please let me know if you notice any Tank Slapper or instabality at high speed ie. above 100 mph ??
Bravissimo!
Does this void warranty?
Everything can void your warranty
Was super excited to do this job myself until I watched this 😂… now the labour charge bmw is charging seems cheap
Do not see the links in the description below the video.............
We no longer stand behind the product thus removed the link.
@@CaliMotoTV Why did you choose to no longer support the Arrow Header??
Yeah, what's up, do they break or what's the deal.
@@CaliMotoTV Interested to know why? If your willing to share? Appreciate helping me avoid possible pit falls before they happen.
Sorry to clarify, we do support Arrow and recommend contacting Motomillion.com for Arrow products, the muffler manufacturer we do not support or recommend
NAMBER1🎉
Get me every time 🤣🤣 8 inch screwdriver they are here they're about to get Bill Bill run!! 😥
😂😂😂
Never seen headers that needed springs on the cylinder portslike that weird lookin
Nah, I’m not doing this lol no where as easy as the R1
What a pain in the butt of a design.. I would skip the whole bike entirely. Note to self. Plus the cops here in so cal are cracking down on Catless exhaust, cars and bike.
👍