Your video's are terrific. You have helped me so much I cannot thank you enough..... This is my first alarm system and I am an old fart nearly 70 years old but knowledgeable when my brain works. The crime in my neighborhood is horrible now. I bought a Vista 20P panel with (2) 6160V keypads. I also installed an expansion 4229 and programmed it to Address 08 (for zones 17-24). This part of the system is working fine thanks to your video's... BUT !!!!!!!!! I also installed a 5881enh wireless RF Receiver and cannot make it talk to the 20P panel. The receiver sees my added wireless sensors as noted by the red light flashing on the small panel when I trip the sensors. The green light is out and has never lite up (meaning available zones still or something). I tried to program the 5881enh to address 07 (for zones 09 to 16) for my wireless devices. Did not work. I changed the 5881ENH to address 00... did not work. I have programmed my keypad and zones for RF for zones 9 to 16... cannot make it work. It has to be something really dumb. CAN YOU PLEASE MAKE A VIDEO SHOWING THE 5881ENH ONCE INSTALLED AND HOW TO PROGRAM THE WHOLE THING???? Show the 5 dip switches and the correct settings for pins 2,3,4 (I know 1 and 5 are off). How to make it talk to the 20p and trip the alarm when the 5881enh receives a signal from the sensor. Appreciate any help!
I have never posted anything on UA-cam before.... my first time. Do I just check back here or does Google mail send me a notification. Not sure, but will check back off and on.
Need help please. I have a Vista 20P panel I installed myself at my new home. I have 5 hardwired zone and 1 wireless zone. I want to add another wireless zone for my pool gate and I want to put it on partition 2, so it chimes when the gate open and closes, but I do not want to actually use it to trigger the alarm; I'll used partition 1 for that. BUT, no matter what, I can't get it to chime. If I assign it to partition 1, it chimes when I open and close it. Change the partition to 2, it no longer chimes or even displays on the Alpha panel. If I do a goto for partition 2 on the keypad, I see it open and close, but no chime. How can I make partition 2 chime? Any help appreciated!
Your video's are terrific. You have helped me so much I cannot thank you enough..... This is my first alarm system and I am an old fart nearly 70 years old but knowledgeable when my brain works. The crime in my neighborhood is horrible now. I bought a Vista 20P panel with (2) 6160V keypads. I also installed an expansion 4229 and programmed it to Address 08 (for zones 17-24). This part of the system is working fine thanks to your video's... BUT !!!!!!!!! I also installed a 5881enh wireless RF Receiver and cannot make it talk to the 20P panel. The receiver sees my added wireless sensors as noted by the red light flashing on the small panel when I trip the sensors. The green light is out and has never lite up (meaning available zones still or something). I tried to program the 5881enh to address 07 (for zones 09 to 16) for my wireless devices. Did not work. I changed the 5881ENH to address 00... did not work. I have programmed my keypad and zones for RF for zones 9 to 16... cannot make it work. It has to be something really dumb. CAN YOU PLEASE MAKE A VIDEO SHOWING THE 5881ENH ONCE INSTALLED AND HOW TO PROGRAM THE WHOLE THING???? Show the 5 dip switches and the correct settings for pins 2,3,4 (I know 1 and 5 are off). How to make it talk to the 20p and trip the alarm when the 5881enh receives a signal from the sensor. Appreciate any help!
I have never posted anything on UA-cam before.... my first time. Do I just check back here or does Google mail send me a notification. Not sure, but will check back off and on.
Realized the 5881 needed the RF Xmtr 5800tm. I removed and got a 5883H (combo xmtr and rcvr).... but have a conflict.
Thank you!
Need help please. I have a Vista 20P panel I installed myself at my new home. I have 5 hardwired zone and 1 wireless zone. I want to add another wireless zone for my pool gate and I want to put it on partition 2, so it chimes when the gate open and closes, but I do not want to actually use it to trigger the alarm; I'll used partition 1 for that. BUT, no matter what, I can't get it to chime. If I assign it to partition 1, it chimes when I open and close it. Change the partition to 2, it no longer chimes or even displays on the Alpha panel. If I do a goto for partition 2 on the keypad, I see it open and close, but no chime. How can I make partition 2 chime? Any help appreciated!