This is great timing. My son and I are changing out the motor and trans on an 05 frontier. First time to ever do a change out of this magnitude. Your video is very helpful. Thanks for doing it.
Hi friend but I think to just change flex plate I think no need to take to remove it from truck I mean you can support it and change the flex plate And by the way in my case to change flex plate isn't better to raise the engine than remove transmission?????
Yeefu lor here is a video about that part, but it is from this same video series. You will need to watch all four videos in the series. ua-cam.com/video/JldIXCjUDfE/v-deo.html
K-1 M-2 It should be a very similar process, but yours is the earlier bodystyle than in the video. I’m not sure what difference there may be in fluid, quantity, etc. As long as you research the small details it should be similar. It has been on all the cars I’ve done
This is great timing. My son and I are changing out the motor and trans on an 05 frontier. First time to ever do a change out of this magnitude. Your video is very helpful. Thanks for doing it.
whitrich47 Gald you found the video! Good luck on the install, and be safe! 🙂
you know where the screw is to put the oil
@@noenolasco9904 to remove the oil, the drain pan bolt is in front of the transmission on the Frontier
Just broke top bolts loose. Short 17 socket,swivel, x3 footlong extensions, breaker bar.
Thanks for the info about to do mine
What are the torque specs for putting it back on do you know?
Hi friend but I think to just change flex plate I think no need to take to remove it from truck
I mean you can support it and change the flex plate
And by the way in my case to change flex plate isn't better to raise the engine than remove transmission?????
This is super helpful, my dad and I are changing out the trans on my 06 Xterra which is mostly similar. Thanks!
Jacie EK I’m glad you found the videos. Good luck- be safe
Does anyone know how to take a transmission dipstick out of a 2001 Nissan frontier2x4
Do you have to re program it? Plz lmk I’m debating on swapping the trans myself. Thanks in advance 🤙🏼
Yes, the company sends the transmission tuned, so they’ll take care of that
2 transmission top bolts are killing me.
Thank's so much mr danny!!
Thanks for watching! These videos are for all of you, glad to see they are enjoyed
Did you have to put the crankshaft at tdc before start up?
No there was no relation to the engine position
So i taken all the hoses unplugged the connectors etc but it wont slide out there is a big gap but it wont slide out any ideas where i went wrong
Yeefu lor Have you removed the bolts for the torque converter to flywheel?
@@dannyjohnsonsgarage no wat part is that on the vid can
Yeefu lor here is a video about that part, but it is from this same video series. You will need to watch all four videos in the series. ua-cam.com/video/JldIXCjUDfE/v-deo.html
Will this be the same for a 2001 qx4/pathfinder?
K-1 M-2 It should be a very similar process, but yours is the earlier bodystyle than in the video. I’m not sure what difference there may be in fluid, quantity, etc. As long as you research the small details it should be similar. It has been on all the cars I’ve done
Job from hell
It sure was, but luckily I have the step by step series to help walk through it