Repairing your HUAWEI WATCH GT2 watch this First. Thanks' for putting this video on it helped me with a repair to my watch, I had the same problem as one of your other comments. The touch screen stopped working, so I bought a replacement that already had the screen fitted in a casing so I only needed the strip down and reassembly it. Your video helped me with that. Thanks
Hello. A very detailed presentation thank you. I cannot find the waterproof rubber ring for the GT2. Any ideas where to find it for the screen and the back cover as well??? And....after all this process it cannot be waterproof again???
HI! The rubber gasket for the back can be found on this site (for Huawei Watch GT2 46mm): garmade.com/products/waterproof-rubber-ring-for-huawei-watch-gt-2-46mm?currency=EUR&variant=44303488024896&Google%20Shopping&gclid=Cj0KCQjwuZGnBhD1ARIsACxbAVg_e9-XY2aPB8-b3nLT-xWhkjf41WUGTUFhGplvyftPz5H_bB9dN8gaAthtEALw_wcB Unfortunately the one for the display cannot be found, but you could close it using glue B-7000. Once repaired, I would suggest not to use it in water because only the factory closure guarantees good waterproofing.
Estuve casi un año con la pantalla de mi Huawei watch gt2 estrellada, y busqué en mi estado algún lugar donde pudieran repararlo y siempre era lo mismo, “no hay repuesto para ese reloj” hasta que vi a este “crack” y me animé a instalarlo yo mismo, ahora mi reloj anda al 100; gracias por el video y tu paciencia… saludos crack.
No to jest praca zegarmistrza przede wszystkim takie mini narzędzia trzeba mieć poza tym nie wiem czy się nie opłaca kupić całego wyświetlacza i wymienić to byłoby proste dla laika ale film jest doskonały tylko dla fachowców techników którzy się tym zajmują
Congratulations for your video, it's great. My problem is that my touch screen does not work, I bought a spare part that includes the touch screen and the casing, so it will be easier to replace it. The question is, do you need the back cover that is screwed on the adhesive? Does that lid have a gasket? and would you submerge the watch in this case? Thank you.
Obviously the back cover has a gasket, but if I remember correctly this one you find wedged in the old case. It should be the subtle gray one. If I were you I would not immerse it because only the manufacturing closure guarantees good waterproofing. Thanks for the compliments and best regards.
Hello, about 12:00 You using a glue, I guess it is b7000 and then this green seal, i guess? What it is, from where do You get it and is it nessesary to use it?
@-@ Thanks for this very nice video! Please answer me to this question. This gasket (the waterproof adhesive glue with the green film) is an self adhesive tape? If answer is yes, then does it have glue on both sides? This tape is it necessary when changing the screen? (there are videos that only put glue B-7000 without this tape). My own package with the screen I ordered did not contain that tape along with the screen, How thin is this tape? Can i use a similar tape or do not need it? Thanks
That tape you're talking about is nothing more than a double-sided tape. You could even close it with just the B-7000. I used both on the video, but anyway I advise you not to immerse it in water because it will never be like factory again.
Got to ask on why did you apply glue on the frame and then puthe the double sided adhesive on it and then added more adhesive glue on top of that? And surely you noticed that the back cover had traditional solid gasket on it and not glue. But anyhoo. Thanks for the video.
I put the glue on the display frame as an additional sealant to make it even more waterproof. While on the back cover we have a real rounded gasket that does not require any adhesive.
Hola, antes el video no estaba con tus comentarios en vez de música.... Justo me iba a animar pero con la música no me da confianza. Por cierto que pegamento usas para sellarlo?. Gracias.
El pegamento se llama B-7000. www.amazon.it/Pacchetto-Tubetti-Colla-Industriale-B7000/dp/B0BTSVW5H9/ref=sr_1_1_sspa?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3E17VG0GEHM9R&keywords=b-7000&qid=1695650690&sprefix=b-7000%2Caps%2C162&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
Το ειδικό εργαλείο για τις βίδες θα το βρείτε στα καταστήματα ηλεκτρονικών ανταλλακτικών σε κουτί με πολλά ειδικά εργαλεία κατάλληλα για όλες τις μικροσυσκευές. Ελπίζω να σας βοήθησα, χαιρετισμούς από την Αθήνα. 😊
Grazie ale fix per questo video. Io sto avendo difficoltà nello staccare il display non avendo lo strumento per l'aria calda che usi tu. Sto provando col phon ma non è molto utile. Hai qualche suggerimento a riguardo? Grazie mille.
Ciao! Per chi non è pratico in effetti non è semplice. Posso solo dirti che devi scaldare e provare, scaldare e riprovare e così via... sino a riuscire a staccarlo.
Puoi trovarli su Ebay: www.ebay.it/itm/283494173063?itmmeta=01HT7VYNV1CN73RMQH38FKW696&hash=item420191c987:g:sOUAAOSw43Fk1JaR&itmprp=enc%3AAQAJAAAA0NrMHFG4N1DwhVjOe4y429R9DFiYNVsZVxQ06eAB86qecM2rFh7srRbRs7PsvXBcHgvaw0%2BnxWX0cP5C2dMKzwaxFPaq1QdmxSpXEoXgZsr7F0G%2BvRZddzn1t9d1RiuTTulai4chq2SNCigRqAdpfJIxDqd9W39KEV9mKQWQUjNCqa7psWwEtLIp%2BidwS8mtGKJ%2FgJdZJKAYYkAKFB4CEqJ%2B6HlhDhc18LKwRBIlARdW4lNeKMXEmv%2FjDwsc%2FHSgnpjUjM5398guIOUM457MlLA%3D%7Ctkp%3ABlBMUMzd-vvRYw
Lamentablemente no se encuentra por ningún lado. Sólo una vez me lo enviaron junto con la pantalla de un proveedor que luego no pude encontrar en línea.
Hi!!! I need help.... I charged my huawei watch 2 classic with the wrong charger head instead of 5V it recieved 12V.... Not it won't turn on.... Is there like a mini fuse or component it can swap out? Or I'm screwed??? 🥺😥😓
Hello! Unfortunately I don't have one available to give you directions, but it should still be checked with a tester by a good technician to see if it can be repaired.
HI! You will need to replace LCD + Touch Screen Display: it.aliexpress.com/item/1005003095929761.html?spm=a2g0o.productlist.main.1.544d39f3IAEytt&algo_pvid=592fdf3d-3eeb-49d6-855c-48cf0b40e9b9&algo_exp_id=592fdf3d-3eeb-49d6-855c-48cf0b40e9b9-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000024056736796%22%7D&pdp_npi=3%40dis%21EUR%2155.11%2130.86%21%21%21%21%21%402145280e16761912839464898d0708%2112000024056736796%21sea%21IT%21189708271&curPageLogUid=BQF7CbNKdpyn Be careful to choose the right version.
@@AleFixIT This gasket (the waterproof adhesive glue with the green film) is an self adhesive tape? If answer is yes, then does it have glue on both sides? This tape is it necessary when changing the screen? (there are videos that only put glue B-7000 without this tape). My own package with the screen I ordered did not contain that tape along with the screen, How thin is this tape? Can i use a similar tape or do not need it? Thanks
Hi! The spare that includes the barometer sensor should be this one. To be sure, ask the merchant first: www.ebay.it/itm/234919386431?mkevt=1&mkcid=1&mkrid=724-53478-19255-0&campid=5338766897&toolid=20006&customid=6110752c5cfb14aa5e9d105a20f6a0e5&_trkparms=ispr%3D1&amdata=enc%3A1oA9ZQLjSRCeh_UPQtTR_gw24
@@AleFixIT The same steps like you did it. The part with the sensors is exactly like change the back with battery. Remove the back cover with Torx T2, ten X screwdrive for disconnect metal connector secure, remove connector carefully and change backup part reverse.
E' molto difficile trovare la guarnizione, a meno che sia fornita con il display. Puoi sigillarlo con colla B-7000, ma non metterlo sott'acqua. Anche con la guarnizione originale non è così ermetico come dicono.
Salve prima di incollare il display non c è modo di poterlo provare se funziona correttamente.. quindi si và a fortuna se funziona ok se non funziona per scollarlo e ritornarlo al venditore sono grossi guai.. giusto?
www.ebay.it/itm/234400784394?hash=item369360200a:g:ULcAAOSwuylh-P6K&amdata=enc%3AAQAIAAAAwKX3F1I5yBcJ%2FjY2vOiFoAOunJA%2BPNZWaN%2BIxgZxggVh97xrPlWOAV5BCVeafugbn723FJvbj8QeIPW%2F4Mxtoq%2FhSceHTmlU3lY7y578AugkFyD%2BqxFXtLaG6GG4Foyr91jBrPtlftwCKi6OczlfZYgG0gsLyPODXuoXoWv%2Fvzx1LcVUIIR1rYtsUjuXZTYQtPS%2BFGuRPXdXjmLeidGtE7yCS6C1vd5mETsob7Dt40ctEO7s0xE2nEAO%2F8F%2FCFadZQ%3D%3D%7Ctkp%3ABk9SR5bwrebBYg Potrebbe essere questo, ma devi verificare che il modello corrisponda. Ti consiglio di leggere i dati sulla confezione e comunicarli al venditore prima dell'acquisto, cosi non rischi di sbagliare.
Buongiorno e complimenti per il video... Vi vorrei contattare perché mi sono acquistato il display nuovo del Watch GT 2 46 mm, l'ho portato a farlo sostituire da un tecnico ma si è fermato con il lavoro perché manca la guarnizione circolare che metti prima di incollare il nuovo display!!! Dove si può trovare la guarnizione circolare e risolvere il problema che ho???
Salve! Solo una volta mi è stata fornita quella guarnizione (che tra l'altro non era niente di che) da un venditore cinese che non ho più trovato online. Infine credo che dovrete farlo incollare con della colla B-7000, ma non risulterebbe del tutto impermeabile.
Hello! My smart watch (this exact watch) had problems. I software updated if and then after that, its like a bug or something. You know when updating this watch you have to update it first on your mobile device then the watch will install the updated data. What happen in my watch is it is already installing however in the mid way of installing, it will reload and start installing AGAIN and it is happening over and over. I dont know if I explained my self very well but I hope you understant it, also I need help how to fix it.
bel lavoro! 2 domande: il torx che usi per aprire il fondo, è lo stesso che usi all'interno? e poi: potresti postare il link del ricambio ? Online se ne trovano ma senza adesivo!
La guarnizione non la trovi da nessuna parte. Puoi usare una colla B-7000, ma poi ti sconsiglio di utilizzarlo in acqua. Il primo cacciavite sul video è un torx, mentre il secondo (quello viola) è un cacciavite a stella.
@@ivanvinegra2248 Podrías usar este pegamento: www.ebay.it/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=b-7000&_sacat=0 Pero te aconsejo que no lo uses más en agua porque solo el cierre hecho en la fábrica es completamente hermético.
@@AleFixIT Great vid, thank you. Saving it for "just in case" - Bad design in my opinion. Purchased a stick-on metal bezel from Amazon. Hopefully that will do the trick. Cheers. Keep well & stay safe
Purtroppo le guarnizioni sono difficilissime da trovare. Puoi chiuderlo con colla B-7000, ma una volta aperto, ti consiglio di non utilizzarlo più in acqua.
Buongiorno, sapete dove acquistare la guarnizione circolare che deve passare tra lo schermo e la scocca? Quando ho comprato lo schermo, non è venuto con esso, e penso che se non si usura, l'orologio non sarà impermeabile... Grazie mille per il tuo video e il tuo lavoro...
Ciao! Purtroppo se non ti è stata fornita con il ricambio, non credo la trovi da nessuna parte. L'alternativa è utilizzare la colla B-7000 per incollarlo e impermeabilizzarlo, ma devi essere bravo.
Hello. I did it. I changed the display and now buy starting only huawei logo apears and after that is dead. I tryed it a bunch of times. Everytime the same thing happens. Does anyone has any clue what should i do?
Untuk GT2 46 mm ini linknya: www.ebay.it/itm/234003525572?itmmeta=01J1WC8NKQB6SA78BPVP8XA4PK&hash=item367bb26fc4:g:NocAAOSwRSVhZo1B&itmprp=enc%3AAQAJAAAA0Pp%2FyR6GYm4D9%2BHzGs%2BQCBQOAEMg1wDiCjESvtkCDMbh15yThwpD98MoYLfSMTak0bkQC7ozT%2F0t4UxGyEPTXnmfReuZPxEXKmbKfxwbzagbdQn%2FfTAlW7A%2BLFfV3jT1I28N8Fb03SEgIKA9JkygV7BVHa7GfpvbOQE8cghddvONYSfyvTUI76pY4UlEiSNLkhQ4KF6MheL3LeQA2PaqLU1U8BWtu3dd6TS0BKRxc8ZZU3%2BvBYnwzW6oU%2BtXwrt9tNLHEF5SET9iZJW8JWp3%2F5k%3D%7Ctkp%3ABk9SR_rZooyPZA
Encuéntrelos aquí: fr.aliexpress.com/wholesale?catId=0&initiative_id=SB_20220331020449&SearchText=huawei+gt2+46mm+display Debe tener cuidado de elegir el modelo exacto y el que tiene números o sin números impresos en la diapositiva.
Repairing your HUAWEI WATCH GT2 watch this First.
Thanks' for putting this video on it helped me with a repair to my watch, I had the same problem as one of your other comments.
The touch screen stopped working, so I bought a replacement that already had the screen fitted in a casing so I only needed the strip down and reassembly it. Your video helped me with that.
Thanks
I am very pleased. Optimal!
Hasta finales de 2023 me sirvio tu video gracias crack!
Excelente trabajo! Hace un año vi el video, compré la pieza y hoy fue que me decide a cambiar la pantalla... muchas gracias por el video!
¡Es un placer!
Muchismas gracias por el tutorial , nos haces la vida mas facill...
tremendamente agradecido por este video! una bendición
Hello, I fixed my GT Watch-2 with your help! Many thanks. Your video is easy to understand and very helpful..
Great! I am very pleased.
Ich kann nicht genug danken für dieses gutes Video. Schritt für Schritt aufgenommen und sehr verständlich, danke, danke. 👍💪
Vielen Dank für die Wertschätzung.
@@AleFixIT ciao fai riparazioni Smartwatch ho visto .. ho un gt2 con vetro lesionato .. quanti € ci vogliono per risistemarlo ?
@@fc1988 ciao! Attualmente non faccio riparazioni smartwatch.
Hello. A very detailed presentation thank you. I cannot find the waterproof rubber ring for the GT2. Any ideas where to find it for the screen and the back cover as well???
And....after all this process it cannot be waterproof again???
HI! The rubber gasket for the back can be found on this site (for Huawei Watch GT2 46mm): garmade.com/products/waterproof-rubber-ring-for-huawei-watch-gt-2-46mm?currency=EUR&variant=44303488024896&Google%20Shopping&gclid=Cj0KCQjwuZGnBhD1ARIsACxbAVg_e9-XY2aPB8-b3nLT-xWhkjf41WUGTUFhGplvyftPz5H_bB9dN8gaAthtEALw_wcB
Unfortunately the one for the display cannot be found, but you could close it using glue B-7000. Once repaired, I would suggest not to use it in water because only the factory closure guarantees good waterproofing.
Sehr gutes Erklär Video vielen Dank
Estuve casi un año con la pantalla de mi Huawei watch gt2 estrellada, y busqué en mi estado algún lugar donde pudieran repararlo y siempre era lo mismo, “no hay repuesto para ese reloj” hasta que vi a este “crack” y me animé a instalarlo yo mismo, ahora mi reloj anda al 100; gracias por el video y tu paciencia… saludos crack.
Me alegro mucho de haberte sido de ayuda. ¡Saludos a ti!
No to jest praca zegarmistrza przede wszystkim takie mini narzędzia trzeba mieć poza tym nie wiem czy się nie opłaca kupić całego wyświetlacza i wymienić to byłoby proste dla laika ale film jest doskonały tylko dla fachowców techników którzy się tym zajmują
Very helpful video. First time I've ever fixed a watch so I appreciate the help
Well I'm glad!
Congratulations for your video, it's great. My problem is that my touch screen does not work, I bought a spare part that includes the touch screen and the casing, so it will be easier to replace it. The question is, do you need the back cover that is screwed on the adhesive? Does that lid have a gasket? and would you submerge the watch in this case?
Thank you.
Obviously the back cover has a gasket, but if I remember correctly this one you find wedged in the old case. It should be the subtle gray one. If I were you I would not immerse it because only the manufacturing closure guarantees good waterproofing. Thanks for the compliments and best regards.
Excelente. Muchas gracias por el video...
Many thanks!
Hello, about 12:00 You using a glue, I guess it is b7000 and then this green seal, i guess? What it is, from where do You get it and is it nessesary to use it?
Yes, I used the B-7000 and a gasket that was supplied to me, but which I was no longer able to find anywhere.
great! Thanks for the video. Do you know if the watch is still waterproof after changing the screen?
I wouldn't use it in the water. Once opened, all immersion-proof devices are never as manufactured, even if they are sealed in the best possible way.
@-@ Thanks for this very nice video!
Please answer me to this question. This gasket (the waterproof adhesive glue with the green film) is an self adhesive tape? If answer is yes, then does it have glue on both sides? This tape is it necessary when changing the screen? (there are videos that only put glue B-7000 without this tape).
My own package with the screen I ordered did not contain that tape along with the screen, How thin is this tape? Can i use a similar tape or do not need it?
Thanks
That tape you're talking about is nothing more than a double-sided tape. You could even close it with just the B-7000. I used both on the video, but anyway I advise you not to immerse it in water because it will never be like factory again.
@@AleFixIT Thanks
Got to ask on why did you apply glue on the frame and then puthe the double sided adhesive on it and then added more adhesive glue on top of that?
And surely you noticed that the back cover had traditional solid gasket on it and not glue. But anyhoo. Thanks for the video.
I put the glue on the display frame as an additional sealant to make it even more waterproof. While on the back cover we have a real rounded gasket that does not require any adhesive.
Hola, antes el video no estaba con tus comentarios en vez de música.... Justo me iba a animar pero con la música no me da confianza.
Por cierto que pegamento usas para sellarlo?.
Gracias.
El pegamento se llama B-7000.
www.amazon.it/Pacchetto-Tubetti-Colla-Industriale-B7000/dp/B0BTSVW5H9/ref=sr_1_1_sspa?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3E17VG0GEHM9R&keywords=b-7000&qid=1695650690&sprefix=b-7000%2Caps%2C162&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
I have one question, which kind of glue did you use
It's called B7000
Quale cacciavite torx va utilizzato per smontare la parte inferiore ?
Το ειδικό εργαλείο για τις βίδες θα το βρείτε στα καταστήματα ηλεκτρονικών ανταλλακτικών σε κουτί με πολλά ειδικά εργαλεία κατάλληλα για όλες τις μικροσυσκευές.
Ελπίζω να σας βοήθησα, χαιρετισμούς από την Αθήνα. 😊
Grazie ale fix per questo video. Io sto avendo difficoltà nello staccare il display non avendo lo strumento per l'aria calda che usi tu. Sto provando col phon ma non è molto utile. Hai qualche suggerimento a riguardo? Grazie mille.
Ciao! Per chi non è pratico in effetti non è semplice. Posso solo dirti che devi scaldare e provare, scaldare e riprovare e così via... sino a riuscire a staccarlo.
Hello can you please give a site where we can find the replacement screen for the watch?
Puoi trovarli su Ebay: www.ebay.it/itm/283494173063?itmmeta=01HT7VYNV1CN73RMQH38FKW696&hash=item420191c987:g:sOUAAOSw43Fk1JaR&itmprp=enc%3AAQAJAAAA0NrMHFG4N1DwhVjOe4y429R9DFiYNVsZVxQ06eAB86qecM2rFh7srRbRs7PsvXBcHgvaw0%2BnxWX0cP5C2dMKzwaxFPaq1QdmxSpXEoXgZsr7F0G%2BvRZddzn1t9d1RiuTTulai4chq2SNCigRqAdpfJIxDqd9W39KEV9mKQWQUjNCqa7psWwEtLIp%2BidwS8mtGKJ%2FgJdZJKAYYkAKFB4CEqJ%2B6HlhDhc18LKwRBIlARdW4lNeKMXEmv%2FjDwsc%2FHSgnpjUjM5398guIOUM457MlLA%3D%7Ctkp%3ABlBMUMzd-vvRYw
Hey I had a question can we buy gt2 screen and put it on original HUAWEI gt 1 since both are of same size?
You can't do it because despite having the same dimensions, the electronics are different.
@@AleFixIT thank you for your response btw is the process similar for GT1
@@mukundzharotia2033 yes, very similar.
Como consigo el empaque que le pones intermedio del pegamento y la pantalla ?
Lamentablemente no se encuentra por ningún lado. Sólo una vez me lo enviaron junto con la pantalla de un proveedor que luego no pude encontrar en línea.
Hi!!! I need help.... I charged my huawei watch 2 classic with the wrong charger head instead of 5V it recieved 12V.... Not it won't turn on.... Is there like a mini fuse or component it can swap out? Or I'm screwed??? 🥺😥😓
Hello! Unfortunately I don't have one available to give you directions, but it should still be checked with a tester by a good technician to see if it can be repaired.
Hi Ale, thanks for video.
My Huawei GT2 watch touch screen not working,can you help me with this.
HI! You will need to replace LCD + Touch Screen Display: it.aliexpress.com/item/1005003095929761.html?spm=a2g0o.productlist.main.1.544d39f3IAEytt&algo_pvid=592fdf3d-3eeb-49d6-855c-48cf0b40e9b9&algo_exp_id=592fdf3d-3eeb-49d6-855c-48cf0b40e9b9-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000024056736796%22%7D&pdp_npi=3%40dis%21EUR%2155.11%2130.86%21%21%21%21%21%402145280e16761912839464898d0708%2112000024056736796%21sea%21IT%21189708271&curPageLogUid=BQF7CbNKdpyn
Be careful to choose the right version.
@@AleFixIT Thanks...
Where did you buy the waterproof adhesive glue (with the green film)? Does it come with the screen?
The gasket was provided with the spare part, while the glue is called B-7000 and you can also find it on Ebay.
@@AleFixIT This gasket (the waterproof adhesive glue with the green film) is an self adhesive tape? If answer is yes, then does it have glue on both sides? This tape is it necessary when changing the screen? (there are videos that only put glue B-7000 without this tape).
My own package with the screen I ordered did not contain that tape along with the screen, How thin is this tape? Can i use a similar tape or do not need it?
Thanks
Huh? No new adhesive for the backplate?
The back cover is equipped with a gasket.
Display kaha see mila ??
Qué tal amigo tengo una duda sabrás el modelo exacto de ese smart Watch.
¡HOLA! Lea la contraportada, debería haber algunos códigos impresos en ella.
Do you know on witch element is barometer sensor?
Hi! The spare that includes the barometer sensor should be this one. To be sure, ask the merchant first: www.ebay.it/itm/234919386431?mkevt=1&mkcid=1&mkrid=724-53478-19255-0&campid=5338766897&toolid=20006&customid=6110752c5cfb14aa5e9d105a20f6a0e5&_trkparms=ispr%3D1&amdata=enc%3A1oA9ZQLjSRCeh_UPQtTR_gw24
@@AleFixIT I bought all back cover with battery. I't works again 🙂
@@drumamati it is better to show it to a technician!
@@AleFixIT The same steps like you did it. The part with the sensors is exactly like change the back with battery. Remove the back cover with Torx T2, ten X screwdrive for disconnect metal connector secure, remove connector carefully and change backup part reverse.
Hi bro! Can I ask as I am just curios, where is the sunlight sensor hidden in this or In my Watch Fit ? Thanks :)
Bye! Unfortunately I don't have it here with me to check it out. If it happens to me again, I'll gladly let you know.
@@AleFixIT Ah ok thanx
nella mia confezione del vetro non c'è la guarnizione. si può installare lo stesso??
E' molto difficile trovare la guarnizione, a meno che sia fornita con il display. Puoi sigillarlo con colla B-7000, ma non metterlo sott'acqua. Anche con la guarnizione originale non è così ermetico come dicono.
Salve prima di incollare il display non c è modo di poterlo provare se funziona correttamente.. quindi si và a fortuna se funziona ok se non funziona per scollarlo e ritornarlo al venditore sono grossi guai.. giusto?
Sul video non lo faccio, ma ovviamente va prima montato tutto senza incollare niente per eseguire dei test.
Ciao , scusa che cacciavite torks serve? 1,0 o1,2?
Ciao, purtroppo non c'è l'ho tra le mani per dirti la misura del Torx.
@@AleFixIT ok grazie lo stesso
I broke my smartwatch screen. Where I can buy a screen for my Huawei Watch GT3 ?
www.ebay.it/itm/234400784394?hash=item369360200a:g:ULcAAOSwuylh-P6K&amdata=enc%3AAQAIAAAAwKX3F1I5yBcJ%2FjY2vOiFoAOunJA%2BPNZWaN%2BIxgZxggVh97xrPlWOAV5BCVeafugbn723FJvbj8QeIPW%2F4Mxtoq%2FhSceHTmlU3lY7y578AugkFyD%2BqxFXtLaG6GG4Foyr91jBrPtlftwCKi6OczlfZYgG0gsLyPODXuoXoWv%2Fvzx1LcVUIIR1rYtsUjuXZTYQtPS%2BFGuRPXdXjmLeidGtE7yCS6C1vd5mETsob7Dt40ctEO7s0xE2nEAO%2F8F%2FCFadZQ%3D%3D%7Ctkp%3ABk9SR5bwrebBYg
Potrebbe essere questo, ma devi verificare che il modello corrisponda. Ti consiglio di leggere i dati sulla confezione e comunicarli al venditore prima dell'acquisto, cosi non rischi di sbagliare.
Buongiorno e complimenti per il video... Vi vorrei contattare perché mi sono acquistato il display nuovo del Watch GT 2 46 mm, l'ho portato a farlo sostituire da un tecnico ma si è fermato con il lavoro perché manca la guarnizione circolare che metti prima di incollare il nuovo display!!! Dove si può trovare la guarnizione circolare e risolvere il problema che ho???
Salve! Solo una volta mi è stata fornita quella guarnizione (che tra l'altro non era niente di che) da un venditore cinese che non ho più trovato online. Infine credo che dovrete farlo incollare con della colla B-7000, ma non risulterebbe del tutto impermeabile.
Que significa cola B7000
Hello! My smart watch (this exact watch) had problems. I software updated if and then after that, its like a bug or something. You know when updating this watch you have to update it first on your mobile device then the watch will install the updated data. What happen in my watch is it is already installing however in the mid way of installing, it will reload and start installing AGAIN and it is happening over and over. I dont know if I explained my self very well but I hope you understant it, also I need help how to fix it.
Ciao! Dovresti provare ad eseguire un Hard Reset: www.hardreset.info/it/devices/huawei/huawei-watch-gt-2-classic-46mm/
My Huawei gt2 goes dead, plz suggest about solution
First, the internal battery must be checked.
bel lavoro! 2 domande: il torx che usi per aprire il fondo, è lo stesso che usi all'interno? e poi: potresti postare il link del ricambio ? Online se ne trovano ma senza adesivo!
La guarnizione non la trovi da nessuna parte. Puoi usare una colla B-7000, ma poi ti sconsiglio di utilizzarlo in acqua.
Il primo cacciavite sul video è un torx, mentre il secondo (quello viola) è un cacciavite a stella.
Que tengo que hacer para conseguir la aplicación de mi dispositivo Huawei wastch GT 2-593
Hola! Puedes explicarte mejor?
❤
Thank you!
Sadece üst camı değişir mi? Lens takabilirmiyiz?
Sadece camın satıldığını hiç görmedim.🙅♀
@@AleFixIT bu bağlantıda ki ürün lens olarak geçiyor bu nedir sizce?
Hola la pieza que colocan en el minuto 12, ese adhesivo donde se puede adquirir,
Hola! Tienes que preguntarle a quien venda la pantalla.
@@AleFixIT ya la he comprado por AliExpress, y no me han dicho nada
@@ivanvinegra2248 Podrías usar este pegamento: www.ebay.it/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=b-7000&_sacat=0
Pero te aconsejo que no lo uses más en agua porque solo el cierre hecho en la fábrica es completamente hermético.
Did it switch on?
Of course yes!
@@AleFixIT Great vid, thank you. Saving it for "just in case" - Bad design in my opinion. Purchased a stick-on metal bezel from Amazon. Hopefully that will do the trick. Cheers. Keep well & stay safe
@@andremostert2534 thank you for your compliments! Greetings and good work.
Great !
Thanks a lot!
Quali guarnizioni e dove prenderle?
Purtroppo le guarnizioni sono difficilissime da trovare. Puoi chiuderlo con colla B-7000, ma una volta aperto, ti consiglio di non utilizzarlo più in acqua.
Ciao, quale è la misura corretta del cacciavite torx?
Ciao, purtroppo non ricordo perché sino ad ora ne ho riparato solo uno e l'ho fatto parecchio tempo fa. Mi dispiace! 🤷♂️
Where u buy this led screen and how much
You can find them on Ebay: www.ebay.it/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=Huawei+Watch+gt2+46mm+LCD+Schermo&_sacat=0
Che colla hai usato? Posso chiederti il link??
Si chiama B-7000, Ecco i link: www.amazon.it/s?k=b7000&__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&ref=nb_sb_noss_1
Thanks a lot. This help me. :)
It is a pleasure!
Funcionou ?? KKKKKK
Buongiorno, sapete dove acquistare la guarnizione circolare che deve passare tra lo schermo e la scocca? Quando ho comprato lo schermo, non è venuto con esso, e penso che se non si usura, l'orologio non sarà impermeabile... Grazie mille per il tuo video e il tuo lavoro...
Ciao! Purtroppo se non ti è stata fornita con il ricambio, non credo la trovi da nessuna parte.
L'alternativa è utilizzare la colla B-7000 per incollarlo e impermeabilizzarlo, ma devi essere bravo.
Grazie mille, buon tutorial, un grande saluto
@@alfonsomartin6646 grazie a te, saluti...
Ciao ma li aggiusti anche
No! Faccio solo dei tutorial per passione.
funny how the most important part seems to be to add back the straps 😆 these come first before even checking if the watch turns on in the end or not
Se sei sicuro di aver fatto le cose bene, hai anche la certezza che non ci siano problemi. 😂
@@AleFixIT yeah! either go all the way or go home! 😂
nice vid though!
@@Ris-v4w grazie! 💪💪💪
@@AleFixIT Instagram I'd do
Mate how did the screen cracked?
I have no idea, it wasn't mine.
Ciao, cos'è che fai dal minuto 1:52 a 2:01?
Ciao! Scaldo leggermente per facilitare l'apertura.
@@AleFixIT Grazie per la risposta, ma è una cosa che si può fare con un normale phon? o è necessario avere lo strumento adatto?
@@clamur3 anche con un phon, ma devi stare attento a non sciogliere le plastiche. Bisogna scaldare giusto un pochino.
any one know what kind of glue he used at the end of the video?
The glue is called B-7000
Hello. I did it. I changed the display and now buy starting only huawei logo apears and after that is dead. I tryed it a bunch of times. Everytime the same thing happens. Does anyone has any clue what should i do?
Hello! I'm sorry I answered late, but I haven't been well. You should try to disassemble the components and reassemble them.
Mine just went black and it aint going on, whats wrong with it?
The display does not light up?
@@AleFixIT yes!
@@abdallehassan6485 try to keep it in charge for a long time, even for a whole night, otherwise it should be opened and checked inside.
@@AleFixIT thanks budy! I will.
L orologio perde la capacità di poter andare sott' acqua?
No, se fai un buon incollaggio con guarnizione.
Beli dimna layarnya bos
Untuk GT2 46 mm ini linknya: www.ebay.it/itm/234003525572?itmmeta=01J1WC8NKQB6SA78BPVP8XA4PK&hash=item367bb26fc4:g:NocAAOSwRSVhZo1B&itmprp=enc%3AAQAJAAAA0Pp%2FyR6GYm4D9%2BHzGs%2BQCBQOAEMg1wDiCjESvtkCDMbh15yThwpD98MoYLfSMTak0bkQC7ozT%2F0t4UxGyEPTXnmfReuZPxEXKmbKfxwbzagbdQn%2FfTAlW7A%2BLFfV3jT1I28N8Fb03SEgIKA9JkygV7BVHa7GfpvbOQE8cghddvONYSfyvTUI76pY4UlEiSNLkhQ4KF6MheL3LeQA2PaqLU1U8BWtu3dd6TS0BKRxc8ZZU3%2BvBYnwzW6oU%2BtXwrt9tNLHEF5SET9iZJW8JWp3%2F5k%3D%7Ctkp%3ABk9SR_rZooyPZA
Donde lo puedo comprar en colombia
Encuéntrelos aquí: fr.aliexpress.com/wholesale?catId=0&initiative_id=SB_20220331020449&SearchText=huawei+gt2+46mm+display
Debe tener cuidado de elegir el modelo exacto y el que tiene números o sin números impresos en la diapositiva.
Please link send me
www.ebay.it/itm/283494173063?hash=item420191c987:g:73UAAOSwTPxiMwTI&amdata=enc%3AAQAHAAAA8B9nanpOqICp8VzNeFJ%2FJaP31xQtBgn9TOBPQ71o0AwnzG5Qz1yCBnNW5M0zuIBKMYEe4ex23q7a%2FyNDtWv4ALod%2BAxvoCCOewWa5xHSUdqrSeknkPCSSLdqpAkmasqks5vL6y0FlyOvUmR%2B2MOWdsYK4VLjvMuu4DsypFLby76%2B2SwZmkvjxQu0jYlRxCbMSq%2B8QvlC%2BuJDS2SBgdY%2FI%2BtR%2FbO55dqW8Wuu5ntrHZgGDkEck86IvyIEpzON5L%2BDJr7TpsaFGxjwd6u%2Frfdi66nO7Az10p73GkyKFQZXrDrXEw7VuWtuoEbRfzM3qkjKfA%3D%3D%7Ctkp%3ABFBMjtvyoNZh
Dove posso trovare il display? Grazie mille
www.ebay.it/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=Huawei+Watch+gt2+46mm+LCD+Schermo&_sacat=0
Sono ricambi dalla Cina. Certo dovrai attendere parecchio con una spedizione standard.
Grazie mille molto gentile
@@emilianomercandino8787 figurati! Buon Natale.
Buon natale anche a te
Hargaberapa tukar screen danmatherboard
Layarnya dapat ditemukan misalnya di Aliexpress atau di Ebay, tetapi Anda tidak dapat menemukan motherboardnya di mana pun.
Nunca prendió en el final si 😅
What do you mean I do not understand?
@@AleFixIT he meant that you didnt turn on the watch at the end of the video so we could see if it worked
@@cesares.linconir9599 it works, it works! 🤣🤣🤣
Замена дисплея
Lau service danRepair matherboard
Music so annoying bro
You're right! Maybe it's better to put them as a light background.
the only bad thing is that doesnt power on 😁😁
Disassemble and reassemble everything. Not the display obviously.
Buon video, però che rottura di coglioni quella musica
🤣🤣🤣 hai ragione!
Cć
Bhai please contact no do mire watch ⌚ display teach nahi ho raha hai GT2 he
Please write better, I don't understand!