Hey man, Im stuck with a HP LaserJet Pro P1102w, I got a question in the mark 1:25 the USB001 (Virtual printer port for USB) (Local Port) did you registered it?
I followed your instructions step by step but still cannot run my printer (laserjet p1102) under Windows 11:((. BTW, this printer works well on my other PC under Win 8.1
I don't know why the printer does not retain a driver after turning off the printer. Which makes me reinstall the driver again until the print responds to the print command
No software download or CD is needed. With HP Smart Install when the USB is first connected the printer is recognized as a virtual cd drive. This provides the driver to do the install and will set the WiFi IP to work on a network router. The HP Smart Install allows you to install the product driver and software by connecting the product to a computer through a USB cable. If the product previously has been installed on a network, reset the wireless defaults. See Restore default wireless settings. NOTE: The installation CD is not required during a HP Smart Install. Do not insert the software installation CD into the computer CD drive. 1. Turn on the product, and then connect the USB cable to the product and the computer. The installation program should start automatically. Connecting the USB cable ● If the HP Smart Install program does not start automatically, AutoPlay might be disabled on the computer. Browse the computer and double-click the HP Smart Install drive to run the program. If you cannot find the HP Smart Install drive, use the product installation CD to install the software. ● If the program prompts you to select a connection type, select the connection type you will use to print to the product after installation.
2. Follow the onscreen instructions to complete the product installation. 3. When the installation is complete, if you want to verify that the product has a network IP address, print a configuration page. Press and hold the product cancel button until the ready light blinks, and then release the button to print the configuration page.
When I select the driver, it goes back to the same window where it asks for the driver . What should i do
Hi, you think i could make my hp 1102w work without an usb?
yes but very Costley better buy new Wi-Fi printer
My printer should be On or Off while installing it
thank you so much, it actually worked. Correct instructions
You're welcome!
Hey man, Im stuck with a HP LaserJet Pro P1102w, I got a question in the mark 1:25 the USB001 (Virtual printer port for USB) (Local Port) did you registered it?
if you not find port & find Hp port Than use Hp port
thank you very much, This video was really helpful
Glad it helped!
I bymistakely clicked remove and print is not working.printer file not showing in desktop step
thank you very much, I could install my HP P1102 printer in W11 with your video
thanks
Amazing, much thanks but sorry Error printing?????
What's wrong?
@@discoverAll much thanks for ur reply, i have the same printer on windows 11, not working, it says status error, driver not digitally sign
I followed your instructions step by step but still cannot run my printer (laserjet p1102) under Windows 11:((. BTW, this printer works well on my other PC under Win 8.1
use hp port or com 4
I used com 4 and still nothing
@@stambiev I have the same printer and it worked for me. you must use the usb option and have the printer turned on and connected to the pc
It shows error how can i fix it?
After printing, disconnecting the wire from the USB and turning off the printer and turning it on again, the printer does not respond to printing
use hp port in installation
@@discoverAll When I try to print, an error appears under the printer name
I already installed it like you say in the video, but the problem is that it sends me an error when printing.
if you fid dot4_001 HP printer Device than select this in port
I don't know why the printer does not retain a driver after turning off the printer. Which makes me reinstall the driver again until the print responds to the print command
use usb port or change port
there was no usb 001 , I chose com 4 , it gives an error??
select hp port or usb or error in usb cable
This video was really helpful
thanks
I can't find this port USB001 (Virtual printer port for USB) (Local Port)
use hp port or any other usb port or your usb cable is Faulty
thank you for your support, i got it
Thank you too
tnx
I am not finding a version to download for Windows 10 as an .exe file. what can I do?
Windows can't find the drivers from this file.
Thank you, it worked.
You're welcome!
TEŞEKKÜRLER
No software download or CD is needed.
With HP Smart Install when the USB is first connected the printer is recognized as a virtual cd drive. This provides the driver to do the install and will set the WiFi IP to work on a network router.
The HP Smart Install allows you to install the product driver and software by connecting the product to a computer through a USB cable. If the product previously has been installed on a network, reset the wireless defaults. See Restore default wireless settings.
NOTE: The installation CD is not required during a HP Smart Install. Do not insert the software installation CD into the computer CD drive.
1. Turn on the product, and then connect the USB cable to the product and the computer. The installation program should start automatically.
Connecting the USB cable
● If the HP Smart Install program does not start automatically, AutoPlay might be disabled on the computer. Browse the computer and double-click the HP Smart Install drive to run the program. If you cannot find the HP Smart Install drive, use the product installation CD to install the software.
● If the program prompts you to select a connection type, select the connection type you will use to print to the product after installation.
2. Follow the onscreen instructions to complete the product installation.
3. When the installation is complete, if you want to verify that the product has a network IP address, print a configuration page. Press and hold the product cancel button until the ready light blinks, and then release the button to print the configuration page.
It didn't work it just told me "go to the website"🙃
THANK YOU!❤
You're welcome 😊
1:27 what can I do if I don't have USB001 (virtual port for usb)?
hp port or com 4
@@discoverAll OK thx
I followed the steps but the printer is not working why is that
usb is connect or not
@@discoverAll I changed the usb port and the printer worked, thank you
Thank you so much
You're most welcome
thanks, it worked
A minha é a P1102w, achei dentro do próprio windows11, ai bastou selecionar, clicar em instalar e pronto, já esta tudo ok !
Obrigado pelo vídeo !
Como?
Excellent!!
Thank you! Cheers!
why i cannot extract the files?
use WinRAR ua-cam.com/video/DGQQr9KJKYc/v-deo.html
thank you
You're welcome
En español plis
lo siento no se español
Click bait nonsense. I said Laserjet 1022, not whatever this is. SMFH
ua-cam.com/video/X4wDdfTLYAE/v-deo.html
Thank You
Thank you
You're welcome