Aprilia SR 50 R Stage6 RT70 piaggio project #2

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 98

  • @marklynsondogeliozuniga7440
    @marklynsondogeliozuniga7440 5 років тому +5

    This is what im looking for
    Scooter Aprila,.

  • @and_rew9768
    @and_rew9768 3 роки тому

    One of the best italian scooter 🏆

  • @JiggyStarz
    @JiggyStarz 5 років тому +2

    This video makes me want to upgrade my bike

  • @__thatcarguy__4086
    @__thatcarguy__4086 4 роки тому +1

    I have an sr50 too but the previous model, i want to modify...
    your build is super super cool bro

  • @Bychusha1
    @Bychusha1 2 роки тому

    Hello, don't you have an oversized spacer drawing? The project is great.

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  2 роки тому

      Hi, they are 15mm in height. Other dimensions are out of my memory and cant check them because the bike is not with me now.

  • @Ace01010
    @Ace01010 10 місяців тому

    Plug and play or do have to modify anything as in milling

  • @theramke5698
    @theramke5698 4 роки тому

    Now i'm going to garage to tune up my aprilia sr factory🛵🛵🛵

  • @jenny-masterchef
    @jenny-masterchef 4 роки тому

    nice project.i did use torsen wd with kiesler rim.it was cool but i did sell it.

  • @sshardchrome
    @sshardchrome 4 роки тому

    With unlimited budjet you can create beautiful moped. Today i managed to get 8500 rpm with standard SR50 IE361 converted to carburetor system. Anyway Honda NSR 125 video would be interesting and you could ride legally on the road without the fear of being caught by the police. I hope that Mr. Babev starts tuning 125cc street bikes. Maybe 40 hp is easily achieved.

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  4 роки тому

      True. I know 125cc 2 stroke bikes are true monsters if tuned. I dont know what would be my next milestone after I finish this project, probably if I have time, still passion, I will make a 100cc engine where 35hp are achievable and around 40hp if you tune the cylinder. Thats a 40hp on a scooter made with 4hp from the factory, now thats a difference. After all I expect 22hp form my engine which is still really fast but the lowest level of high-end tuning, I went for this parts because of the budget but also to gain experience first.

  • @markinas2004
    @markinas2004 4 роки тому +1

    Hey, love your bike and your videos! Are you going to make a part 3?

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  4 роки тому +1

      Hi thank you my friend. I have some progress but to little to make a whole video for now. Or maybe i can do it to show whats happening now otherwise there will be long time until first start

    • @markinas2004
      @markinas2004 4 роки тому +1

      @@ApriliaSR50Customs Take your time man, dont rush it, its a really nice build. Keep up the good work!💪💪

  • @rainbowberk1376
    @rainbowberk1376 4 роки тому +1

    is part 3 comming out soon?

  • @medilachance1783
    @medilachance1783 4 роки тому +1

    perfect bro i have an aprilia sr 50street and in whante to do the same clin staff like this

  • @blackheavyblans
    @blackheavyblans 3 роки тому

    Hi! Where can I buy a similar handlebar adapter? I search all over the internet and didn't find any. Can you help me?

  • @djaro112
    @djaro112 4 роки тому

    Hello! When 3 part? I want to see how its ride.

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  4 роки тому +1

      Arkadiusz Szot my plans were to finish the scooter this summer but because of corona I am not even home now :(

    • @djaro112
      @djaro112 4 роки тому

      Kaloyan Babev Ok! Im waiting, i have scooter with with malossi sport but I want to buy sr50r and put high end modifications, maybe something similar to your setup :)

  • @langmanis_w7418
    @langmanis_w7418 3 роки тому

    Hey! Really like the build! But i have a question. Where did u get those indicators for grips?

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  3 роки тому

      Thanks. nl.aliexpress.com/item/1005001693658057.html?spm=a2g0n.productlist.0.0.774674068gguj2&browser_id=65c7d6874172490386f116ce5c985163&aff_trace_key=&aff_platform=msite&m_page_id=1790a16d40eb82847edf994a60d119af9eb61437a5&gclid=&_imgsrc_=ae01.alicdn.com%2Fkf%2FHdede212cf0ac46f68864c82cef079e77T.jpg_640x640Q90.jpg

  • @stefanchoo
    @stefanchoo 3 роки тому

    Кога ще готов бе фончо

  • @wisee2000
    @wisee2000 3 роки тому

    I can`t find str8 variator cover with holes for my 2012 Sr50 ... Only malossi... almost for free... 300$

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  3 роки тому

      Str8 cover is not for sale anymore i think. I bought mine second hand

  • @wisee2000
    @wisee2000 3 роки тому

    Hey bro, what forks you have ? Arn`t they too soft ?

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  3 роки тому

      Hi, i am with the original from aprilia. Maybe i will invest in the future for stage6 forks. They are doing new generation now

  • @mirafiorimotorsport5678
    @mirafiorimotorsport5678 Рік тому

    Здрасти с каква електроника си в момента?Защото аз не мога да намеря никаква,защото съм с вал малоси мхр на 85 биела и електрониката на стейдж 6 не става.Пък иксам ако може да има и фарове и мисля да поръчам Mvt,обаче пък за Mvt-то пише че за скутери с пиаджо двигател само преди 2003.И също ти дали имаш и продаваш някоя?

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  Рік тому

      Аз не продавам. В момента съм с pvl с cdi на r&d italy. Ползвам ръчно изработена литиева батерия за захранване на всичко по мотора. При теб защо да не става кое точно не става?

    • @mirafiorimotorsport5678
      @mirafiorimotorsport5678 Рік тому

      @@ApriliaSR50Customs Ами в скутер атак пише че всички елктроники не стават в моя случай ,заради вала .

    • @mirafiorimotorsport5678
      @mirafiorimotorsport5678 Рік тому

      @@ApriliaSR50Customs А някакви хай-енд части като торк,вариатор,гърне да продаваш?

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  Рік тому

      @@mirafiorimotorsport5678 нищо не продавам. А за ротора е така както казваш. Трябва ти ротор на малосси. Шанс да намериш някоя която да е и алтернатор май няма

  • @tomaszpakua2457
    @tomaszpakua2457 4 роки тому

    Waiting for a rest upgrade. What you think, if I buy new one Aprilia 2t but fuel injected, is any chance to upgrade this Scooter , and drive 100km/h + ? It is 50cc. New one cost about 2500£ any advice ? I mean R50r model 2019.

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  4 роки тому +2

      Tomasz Pakuła usually nobody buys injection model with plans to tune it but yes you can upgrade it and go 100kmh+. If you want to go fast the piaggio carburetor engine is the best. It has way more tuning parts in comparison with injection which has only 2 70cc sport kits with up to 8hp. The carburetor version can be maxed out with around 38hp. My advice is if you buy brand new injection dont mess with the engine. If you want to tune buy second hand carburetor piaggio model.

  • @bardak5980
    @bardak5980 4 роки тому

    Hi, how to connect lights without speedometer?

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  4 роки тому

      Vėjas Nupūstas The wiring from the speedo does not interfere with lights wiring if you’re asking about this model aprilia specifically . You can remove your speedo and still have your lights connected as long as you keep the consoles

  • @coddas87
    @coddas87 4 роки тому

    Cool build! The front disc is for Aerox ?

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  4 роки тому +1

      thanks, disc is 280mm fits both aerox and aprilia but I bought another now, this from the video I have to sell

    • @coddas87
      @coddas87 4 роки тому

      @@ApriliaSR50Customs Thanks! Dont find much braking parts for Aprilia when im searching and most are out of stock ,maybe a covid effect? . I subscribe and see what happens next :D

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  4 роки тому

      @@coddas87 what parts do you need exactly?

    • @coddas87
      @coddas87 4 роки тому

      @@ApriliaSR50Customs I dont need anything really , just looking around to see whats there if i ever should want to build it . i have a fast Aerox with a 172cc engine when i feel for speed so my Sr is stock for now .

    • @jimccc9467
      @jimccc9467 4 роки тому +1

      Front brakes might be a bit much, cool to look at. Hopefully small piston mc so you can actually use them effectively

  • @SeNu420
    @SeNu420 4 роки тому

    how much longer until part 3

  • @fourierb
    @fourierb 3 роки тому

    Hi, how do you install the side stand?

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  3 роки тому +1

      it is attached to the subframe which connects the engine to the frame. It will take you 30sec to find out where to mount it and you do not need to cut the fairing

    • @fourierb
      @fourierb 3 роки тому

      @@ApriliaSR50Customs Thank you for your answer :) I have a buzetti side stand and unfortunately I have to cut the fairing and I don't want to do it.

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  3 роки тому

      @@fourierbyes because its mounted on different place

  • @jotski10
    @jotski10 4 роки тому

    What exhaust do u have?

  • @skrivelis4315
    @skrivelis4315 4 роки тому

    new video plz....

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  4 роки тому +2

      Skrīvelis I am not home now because of corona but there will be new video for sure

  • @marklynsondogeliozuniga7440
    @marklynsondogeliozuniga7440 5 років тому

    Top Speed?

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  5 років тому

      The scoot is still a work in progress, I will share it when its ready

  • @skrivelis4315
    @skrivelis4315 4 роки тому

    I recomend u to buy a Malossi red ignition cover😈🤟

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  4 роки тому +1

      i will leave it without a cover, i like to see how the ignitions looks and rotates

  • @АнгулиАчмиз-п1ч
    @АнгулиАчмиз-п1ч 3 роки тому

    🔥💪👍😉🇷🇺✌️

  • @ivandenchev5455
    @ivandenchev5455 4 роки тому

    Колега кога ще качваш 3та част да ги видим тия 70ки бягат ли😁🤭

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  4 роки тому

      Ivan Denchev лятото, като мине короната

  • @MihovIlian
    @MihovIlian 5 років тому

    Туй нещо минава 100 ли е тоспак😮

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  5 років тому +1

      Ilian Mihov ще ги минава и то с много😉

  • @Frenzy_striker
    @Frenzy_striker 2 роки тому

    It should be called aprilia sr70

  • @stefanchoo
    @stefanchoo 5 років тому

    Ти си баси якия

  • @jaamie8006
    @jaamie8006 3 роки тому

    Hello where did u buy the rear disc, galfer

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  3 роки тому

      Scooter-center.com but its not for sale anymore. You can still find it on some websites

    • @jaamie8006
      @jaamie8006 3 роки тому

      @@ApriliaSR50Customs how much did u pay for it?

    • @ApriliaSR50Customs
      @ApriliaSR50Customs  3 роки тому

      @@jaamie8006 around 50eu and with shipping to my home 53-54eu

    • @jaamie8006
      @jaamie8006 3 роки тому

      @@ApriliaSR50Customs okey gonna try to find it :D , thank you