Nice to see people looking after their gear 😊 , my old man always said...5 to 10 minutes on a quick service check , save's alot of down time with issues...Me , I like listening to Allan Jackson , Don Williams and Merle Haggard while on the tractor or zero-turn makes the work more enjoyable.
I have a TYM574 as well Bush hogging at PTO rated RPM. It burns about 2 gallons an hour. I am just over the 500 hour mark. Mine has not been problem free but I will say the tym warranty has stood behind their product.
Hank, Love when you post tractor videos! I sold my horse farm in Illinois and retired to Florida a year ago but do miss running my TYM 574 HST Cab tractor. Mine was a 2020 model year and like you I never needed to call the dealer to address any problems. The only issues I had were self inflicted….but we wont talk about them😊. Have you looked into a batwing mower? I pulled a 10’ from Rhino with my tractor but you could handle a 12’ with the HP of the 574. 12’ would reduce your mowing time nearly in half… You already have the necessary rear hydraulic remotes with “float” detent on that tractor. God Bless!
Nice Tractor Hank, TYM seems to be gaining alot of popularity. You and Arms really like them. I'll just have to stick with my old Ford 2600 hand me down. Can't complain it runs and was free. Run what ya brung.
Good to hear you like your TYM 574. I'll be buying the same tractor you have in Aug, after my new house is built. We've got a 16 acre farm in IN. 60 chickens and a couple of pigs. Going to increase to 6 pigs next year, and the following year a couple of steaks on the hoof. Looking forward to getting the tractor and cleaning up our woods a bit and taking care of my 1200' gravel driveway.
We have a 55 horse mahindra, its similar to your setup. We have had a few problems, blew a hydraulic cooler. That was a treat to fix. The steering valve in the tractor started leaking, it refuses to start if it’s below 20 degrees outside, even when plugged in. The front axle is leaking something fierce. Every time i call the dealer to get parts it’s always “ oh yeah that’s a common problem”! The tractor has 120 hours on it, It’s 6 years old. I love the AC and what little heat it makes in the winter, but it’s just not worth it. I find myself on our 1800 Oliver to do stuff rather than using the mahindra. It’s weird because some people say theirs are dead reliable with no issues, I guess mine was built on a Friday before a long weekend!
Great video! The TYM brand is certainly growing - and all the UA-cam creators are helping showcase the benefits and capabilities of these machines. Thanks for sharing your experience!
Thanks for another great video. It was interesting and enjoyable. Glad you like and are getting good service out of your TYM tractor. Nice unit. Thanks Hank. The Iowa Farm Boy.
That's probably my favorite thing to do on a tractor, bushhoggin 😎 Using the finish mower is second most favorite, but it's not quite as fun because you can't mow the "rough stuff" 😂 Thanks for sharing Hank, take care, God bless!
the branson was returned to branson as it was just a demo unit for him to play with for XXX amount of time when their partnership ended he had to give it back to them TYM did not add that stipulation to him when they partnered essentially giving him the tractor for good he did a video on it when he got it
It is my understanding that TYM bought Kujuke a Korean manufacturer of small tractors, that produced the Branson brand of tractors. I have had excellent experience with the Branson brand, no longer sold under that name , I've been told TYM does support the Branson tractors.
Hour used to be at a curtain rpm on old tractors, like you say so I guess it’s still the same 😊 One tractor I used to drive cutting fire tracks for forestry was 1 hour@1800rpm 😎👍🏻
Hello Hank and thanks for the videos. I bought the same tractor a year ago. It is fantastic! I love the cold cold air on these hot humid days in Louisiana, which brings me to my only problem... My a/c dumps lots of condensation into the cab. I have checked the drain tube and it appears to be clear and is draining some there. I'm wondering if it's a design problem. Our air is sopping wet here and it may not be capable of getting that much water out fast enough. Have you had that problem?
TYM has Yanmar engines, pretty bulletproof. Even John Deere uses Yanmar engines in their compact tractors. Lots of parts floating around for them if ever needed.
That reminds me of what Summit themselves says about the tractor market. There are 18 brands of subcompact tractors, but only 8 companies behind them. Lots of parts and platform sharing, just like the car market. The Yanmar 2.2L in my YT347 is also used in the John Deere 4044R/M.
Hank, I gotta ask, why do you mow with the front end loader attached? I’ve got a JD and I always take my loader+arms off. I’ve always done it because I figured it was a couple extra 400+ lbs I didn’t need to lug around for a day or two while mowing. I actually don’t know if there is enough benefit to taking it off or not, just always made sense to me. I’m interested in your thoughts…
My Kubota MX5200 is about same size tractor and it uses around a gallon an hour also….one thing for sure, the tank of fuel will last way longer than ya want it to.
You have really got that place looking good considering what you had when you started out with all the stumps everywhere . With a little TLC and time is all it takes 👍🚜😎
You have a new subscriber - me. The UA-cam algorithm did not help your main channel for me. It suggested your second channel where you just whip out your phone and share something you find kind of interesting. I get it now. I enjoyed this video very much. Funny I found your second channel first and your main videos now. You live near my Uncle's snowbird trailer house down there.
@HamiltonvilleFarm Appreciate your insight. I'm in the market for a compact cab tractor and live 4 hours from a TYM dealer. Cab noise is a big deal to me, so trying to determine which of the Korean tractors has the quietest cab.
I don't use a QH on my bush hog and tiller....I talk about that in several videos...It's just a quirk of mine, I'd rather have them directly hooked to the tractor.
Hank it's very sad seeing how they use cheaper metal nowadays. I also am not impressed with the lack of welding spot welds don't hold up. Looks like we see the same problem with the new tractor implements they rust out. Looks like a new maintenance program is needed by the farmers now wash and most of all apply wax and use a under coating to prevent the rust.
Bought a new 6 ft.brush cutter from Everything Attachments and after the second year the paint is peeling off and rusting. Had an old bush hog model and never any paint failure or rust.
Hank grass didn’t look that bad. I guess when I think of brush hogging I think of thick tall grass. Your grass looks like all you need is a big rider mower lol.
I love your video(s)! My only suggestion is that maybe instead of your music selections, you should listen to some inspirational audio tapes by the great Mr. Wiley! You will feel more uplifted and motivated after hearing his words of wisdom. 😁
I want a UA-cam video of a guy that had a tym tractor talkin about how junk they were but what he did not mention is he was using it like a bulldozer which was not its intended purpose if we would have had a dealer closer to our house I would have got a tym instead of a Mahindra
Jesus loves all of us so much that He died and shed His blood for all of our sin. Thank you Jesus! Have you placed your faith in the blood of Jesus for the remission of your sin? If not, you should do it today. God bless you and your family Hank!
BeeGees and any 60 to early70 music great, just don't play it so loud the neighbors have to hear it. contractors and landscapers blast music just piss off anyone in a quater mile
I fooled around one time to check my 25 hp fuel burn rough guess usually spring time first outing gallon to gallon and half their about’s till it had a few trips then it seems start sipping fuel oil usage bit more. She’s the last of the 1995’s era two stroke YAMAHA’s everything now is four stroke. Same thing regardless of usage lower unit change keeping fresh gear oil. Then keep the fuel drained un hooked and burned off.We parked the boat due to, time and rotten tires Broken trolling motor mount the mount wasn’t a good design flimsy limped along Never came up with a fix. good boat by the ALUMACRAFT company. The evinrude e-tec H.O {high Output} has T-stat {not sure what that stands for} or what the issue is cooling not the water pump she gets over three thousand RPMS heat 🚨 goes off in the bass boat. The other is the company is no longer in bidness 150 outboard. So finding a mechanic is a bust so its been sitting a year. grr my boating n fishing 🎣 drives me nuts. Yes the one part online 27.00 but is that the issue.?? simple thermostat. If you can find or mention it on you tube video need EVINRUDE e-tec T-stat Theirs no local mechanics nobody with a scan tool to clear codes. Over heats. It’s one of those brand new since new grimlins does it then not??Tech manual states to cease operation see dealer and mechanic it be great cheap fix.
@@amossnowdaharleyman9179 Check out the Kukje engines. They are probably more bombproof than any Yanmar out there today. Mechanical injection, so once they start, no electricity needed, so no sensors, no computers, nothing. Even the DPF regen system is completely separate from the engine. So if that system were to konk out, the tractor would still run. I just bought a TYM, and I made sure it was a unit with the Kukje in it, not a Yanmar.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
▶️Watch the TYM do some heavy lifting: ua-cam.com/video/j3qc-yz-n7M/v-deo.html
Thanks!
God bless you Hank, And Thanks for Your Service brother!!!
Thank you
Great video Hank great explanations thank you for sharing and your time was awesome never miss a video
Thank you
Nice to see people looking after their gear 😊 , my old man always said...5 to 10 minutes on a quick service check , save's alot of down time with issues...Me , I like listening to Allan Jackson , Don Williams and Merle Haggard while on the tractor or zero-turn makes the work more enjoyable.
I have a TYM574 as well Bush hogging at PTO rated RPM. It burns about 2 gallons an hour. I am just over the 500 hour mark. Mine has not been problem free but I will say the tym warranty has stood behind their product.
love the TYM, have had the 474 with Cab for two years and it is fantastic, maintenance is key for any tractor.
Hank, Love when you post tractor videos! I sold my horse farm in Illinois and retired to Florida a year ago but do miss running my TYM 574 HST Cab tractor. Mine was a 2020 model year and like you I never needed to call the dealer to address any problems. The only issues I had were self inflicted….but we wont talk about them😊. Have you looked into a batwing mower? I pulled a 10’ from Rhino with my tractor but you could handle a 12’ with the HP of the 574. 12’ would reduce your mowing time nearly in half… You already have the necessary rear hydraulic remotes with “float” detent on that tractor.
God Bless!
Nice Tractor Hank, TYM seems to be gaining alot of popularity. You and Arms really like them. I'll just have to stick with my old Ford 2600 hand me down. Can't complain it runs and was free. Run what ya brung.
I hear ya👍👍
Good to hear you like your TYM 574. I'll be buying the same tractor you have in Aug, after my new house is built. We've got a 16 acre farm in IN. 60 chickens and a couple of pigs. Going to increase to 6 pigs next year, and the following year a couple of steaks on the hoof. Looking forward to getting the tractor and cleaning up our woods a bit and taking care of my 1200' gravel driveway.
👍 nice
The diesel level is easy to explain. That things making fuel.
We have a 55 horse mahindra, its similar to your setup. We have had a few problems, blew a hydraulic cooler. That was a treat to fix. The steering valve in the tractor started leaking, it refuses to start if it’s below 20 degrees outside, even when plugged in. The front axle is leaking something fierce. Every time i call the dealer to get parts it’s always “ oh yeah that’s a common problem”! The tractor has 120 hours on it, It’s 6 years old. I love the AC and what little heat it makes in the winter, but it’s just not worth it. I find myself on our 1800 Oliver to do stuff rather than using the mahindra. It’s weird because some people say theirs are dead reliable with no issues, I guess mine was built on a Friday before a long weekend!
Great video! The TYM brand is certainly growing - and all the UA-cam creators are helping showcase the benefits and capabilities of these machines. Thanks for sharing your experience!
You bet!
Thanks for another great video. It was interesting and enjoyable.
Glad you like and are getting good service out of your TYM tractor. Nice unit.
Thanks Hank.
The Iowa Farm Boy.
Thank you sir
A fun day cutting grass on ur farm. noticed a lot of hanging branches hanging down. pole saw will take care of them.
There all above the cab :)
I love mowing Hank. I appreciate you sharing, buddy 👍
float for fuel sending unit is towards rear of tank as you go up hill more fuel goes to the rear of the tank showing on the gauge as more fuel in tank
That's probably my favorite thing to do on a tractor, bushhoggin 😎 Using the finish mower is second most favorite, but it's not quite as fun because you can't mow the "rough stuff" 😂 Thanks for sharing Hank, take care, God bless!
Yes sir!
A flail mower will do rough or grass areas.
I love my TYM T474C not one issue out of mine either. Amazing machines without the BS, all the features and comforts at an amazing price.
What ever happened to the Branson tractor ?
We traveled 1500 MILES in 24 Hours for this load!
ua-cam.com/video/dyNRuvXZP3E/v-deo.html
the branson was returned to branson as it was just a demo unit for him to play with for XXX amount of time when their partnership ended he had to give it back to them TYM did not add that stipulation to him when they partnered essentially giving him the tractor for good he did a video on it when he got it
@@Hfoutdoorsyt i have watched some older videos where you had a mahindra 5540 where did that one go?
I sold that to my brother in law a couple years back
@@Hfoutdoorsyt Thanks I missed that one . I see TYM here in CA but none local to me in No. CA .
It is my understanding that TYM bought Kujuke a Korean manufacturer of small tractors, that produced the Branson brand of tractors. I have had excellent experience with the Branson brand, no longer sold under that name , I've been told TYM does support the Branson tractors.
True statements.
Thanks for the video, Hank. Maybe do a video on your top link and how it operates. Cant find a video for that on UA-cam, only for other units.
Great video Hank, good review of the TYM.
Hour used to be at a curtain rpm on old tractors, like you say so I guess it’s still the same 😊
One tractor I used to drive cutting fire tracks for forestry was 1 hour@1800rpm 😎👍🏻
Hello Hank and thanks for the videos. I bought the same tractor a year ago. It is fantastic! I love the cold cold air on these hot humid days in Louisiana, which brings me to my only problem... My a/c dumps lots of condensation into the cab. I have checked the drain tube and it appears to be clear and is draining some there. I'm wondering if it's a design problem. Our air is sopping wet here and it may not be capable of getting that much water out fast enough. Have you had that problem?
We are super humid here as well. But I haven't had that issue. I'm sure you've checked the cab filters, so I'm not sure what it would be.
Hank what are you planning to plants?
Cause i don't know but i think you may need to build your own pond 🤔
I have a branson 4815ch and it burns around a gallon an hour.
Good evening uncle Hank we missed you
Howboutcha
TYM has Yanmar engines, pretty bulletproof. Even John Deere uses Yanmar engines in their compact tractors. Lots of parts floating around for them if ever needed.
That reminds me of what Summit themselves says about the tractor market. There are 18 brands of subcompact tractors, but only 8 companies behind them. Lots of parts and platform sharing, just like the car market. The Yanmar 2.2L in my YT347 is also used in the John Deere 4044R/M.
My TYM T450 has a kubota engine
I have the 754 and this thing is a work horse. For the price compared to a John Deer or Kubota in the same class is no comparison.
Hank, I gotta ask, why do you mow with the front end loader attached? I’ve got a JD and I always take my loader+arms off. I’ve always done it because I figured it was a couple extra 400+ lbs I didn’t need to lug around for a day or two while mowing. I actually don’t know if there is enough benefit to taking it off or not, just always made sense to me. I’m interested in your thoughts…
My Kubota MX5200 is about same size tractor and it uses around a gallon an hour also….one thing for sure, the tank of fuel will last way longer than ya want it to.
You have really got that place looking good considering what you had when you started out with all the stumps everywhere . With a little TLC and time is all it takes 👍🚜😎
Yes sir!
You have a new subscriber - me. The UA-cam algorithm did not help your main channel for me. It suggested your second channel where you just whip out your phone and share something you find kind of interesting. I get it now. I enjoyed this video very much. Funny I found your second channel first and your main videos now. You live near my Uncle's snowbird trailer house down there.
Very good and God bless yall
TYM-TX65 drive motor stopped working. Slowed down to a crawl then stopped and never got going again. Any solutions or common fixes guys? Thanks
Do you find the tractor cab noise too loud to listen to the radio or use the phone while mowing?
No sir. I choose to wear headphones bc I'm a sound diva. I gotta hear my tunes in high quality
@HamiltonvilleFarm Appreciate your insight. I'm in the market for a compact cab tractor and live 4 hours from a TYM dealer. Cab noise is a big deal to me, so trying to determine which of the Korean tractors has the quietest cab.
Good luck 👍
Nice tractor looks comfortable to operate
Need to get one of those bat wing shredders
Im trying to decide between Vtym 4820 or tym 474. The 4820 is heavier with more lift capacity so im leaning that way.
We have ac its called 41 degrees out side.
Is that amber clearance light half full of water? Not picking at you. I just notice things
no sir..must've been a camera angle or something.
How big of a mower can that tractor handle?? Awesome video
In florida on flat ground? 12'
Sorry, I can’t hook up a power takeoff implement with the engine running
🤔 curious... how many achers total do you own?
75
@@Hfoutdoorsyt Big place, 70 achers more than me. 👌🙂
Noticed you had your backhoe blocked up. Is that so the hydraulics don’t leak down? And does it make it easier to hook back up?
yes and yes 👍
Maybe a video sometime on how you do that. ?
are you sure about the hours??? i never knew that. this is my 3rd tractor
Why do you not use a quick attach hitch on your bush hog?
I don't use a QH on my bush hog and tiller....I talk about that in several videos...It's just a quirk of mine, I'd rather have them directly hooked to the tractor.
Just remember young man I was one of your first subscribers. Now you are Rich and Famous. Mark
Lol. I was thinking about you the other day. Hope all is well.
That’s some wild music while greasing 😂
Lol
Hank always wanted to be in a reggae band…lolol
Un petit coucou de France j'adore vos vidéos mais j'aurais une petite question vous n'êtes plus en duo avec la personne de vos débuts ???
How thought you had a Branson ??
you need to turn on your notification bell and make sure you watch :) We've had this for 18 months. We posted about why we no longer have the Branson.
Hank it's very sad seeing how they use cheaper metal nowadays. I also am not impressed with the lack of welding spot welds don't hold up. Looks like we see the same problem with the new tractor implements they rust out. Looks like a new maintenance program is needed by the farmers now wash and most of all apply wax and use a under coating to prevent the rust.
Bought a new 6 ft.brush cutter from Everything Attachments and after the second year the paint is peeling off and rusting. Had an old bush hog model and never any paint failure or rust.
Hank grass didn’t look that bad. I guess when I think of brush hogging I think of thick tall grass. Your grass looks like all you need is a big rider mower lol.
Love that nascar mode lol
My boy my boy. Driving that sweet TYM Tractor listening to Elvis. TCB ⚡️
🕺🏻🔧
Nice tractor and nice flat land
Yes sir
That is a 55 hp tractor, you should be able to run a 7 mower. I would suggest a twin spindle gear driven mower like a Bush Hog Squealer.
I want a 12-15’ bat wing for it
@@Hfoutdoorsyt a 12 or 15 foot bat wing would destroy that compact tractor a 15 foot probably weighs darn as much as that tractor
@@Hfoutdoorsyt that would be interesting to see, as long as the grass was sparse you might be able to turn it.😀
Nice and flat here, i think it would handle 12’ easy
Hey hank I'm a big fan of you and Wylie love the content I have something I would like to mail to you and Wylie how do I go about that
PO Box 183 vernon fl 32462.
Thanks!
I'd much rather hear that machinery work than that "music."
I love your video(s)! My only suggestion is that maybe instead of your music selections, you should listen to some inspirational audio tapes by the great Mr. Wiley! You will feel more uplifted and motivated after hearing his words of wisdom. 😁
😂👍
305k subscribers! A long way since the Mahindra 4570
that's good you never had any Problems with it..
I like that grease gun. Is that a DeWalt
Yes sir
Howboutcha! A true friend would fabricate up a buddy seat in the tractor so Wiley could ride shotgun and enjoy the ac with ya!
I got the 3m worktunes and listen to the " unashamed " podcast with the robertsons while I'm mowing or digging
Thats a good podcast
Tym,John deere it’s service after the sale it’s mechanical
Yep
Don't you wanna hand pump some grease into that tractor and get you some carpal tunnel? 😅
Won't the TYM run your mulcher ?
No. The flow isn’t high enough
Thanks for your response
How bout ja Hank, I emailed you today. I hope you will be able to give me a call.
Still waiting for the challenge you dropped Wally off gave them 2 hours I think Wally needs to find you an abandoned truck and give you 2 hours😂
good video but the music not my style hank lol
Lol. It was hit or miss for me too
I want a UA-cam video of a guy that had a tym tractor talkin about how junk they were but what he did not mention is he was using it like a bulldozer which was not its intended purpose if we would have had a dealer closer to our house I would have got a tym instead of a Mahindra
Jesus loves all of us so much that He died and shed His blood for all of our sin.
Thank you Jesus!
Have you placed your faith in the blood of Jesus for the remission of your sin? If not, you should do it today.
God bless you and your family Hank!
God, that music don't sound like George to me!
BeeGees and any 60 to early70 music great, just don't play it so loud the neighbors have to hear it. contractors and landscapers blast music just piss off anyone in a quater mile
I fooled around one time to check my 25 hp fuel burn rough guess usually spring time first outing gallon to gallon and half their about’s till it had a few trips then it seems start sipping fuel oil usage bit more. She’s the last of the 1995’s era two stroke YAMAHA’s everything now is four stroke. Same thing regardless of usage lower unit change keeping fresh gear oil. Then keep the fuel drained un hooked and burned off.We parked the boat due to, time and rotten tires Broken trolling motor mount the mount wasn’t a good design flimsy limped along Never came up with a fix. good boat by the ALUMACRAFT company. The evinrude e-tec H.O {high Output} has T-stat {not sure what that stands for} or what the issue is cooling not the water pump she gets over three thousand RPMS heat 🚨 goes off in the bass boat. The other is the company is no longer in bidness 150 outboard. So finding a mechanic is a bust so its been sitting a year. grr my boating n fishing 🎣 drives me nuts. Yes the one part online 27.00 but is that the issue.?? simple thermostat. If you can find or mention it on you tube video need EVINRUDE e-tec T-stat Theirs no local mechanics nobody with a scan tool to clear codes. Over heats. It’s one of those brand new since new grimlins does it then not??Tech manual states to cease operation see dealer and mechanic it be great cheap fix.
👍💪
need to fertilize get some grass to grow good n thick so it gets work out 💪. This isn’t good grass no offense.
Lol. None taken. Its a pasture of weeds😁
👌👌👍
Sorry. But got better things to do than watch a guy brush hoggin.🤣🤣
Tym is a bad brand in my opinion. Owned 1 and it was problem after problem.
I hate that for you. Mine has been awesome. Sorry you got a bad one
Yeah. Sometimes that’s how it goes haha. I didn’t mean for that comment to sound so negative.
Its all good
TYM (Yanmars) are probably the most fuel efficient diesels out there in my experience. Worst: Internationals. Source: Me. Old guy.
Fewer and fewer Yanmars in TYM’s lineup. They are moving away from Yanmar engines and going back to their own (Kukje) units.
@@TheMindfulHomestead Yanmar diesels are just about farmer proof in my experience. Love them and easy to work on too (old ones).
@@amossnowdaharleyman9179 Check out the Kukje engines. They are probably more bombproof than any Yanmar out there today. Mechanical injection, so once they start, no electricity needed, so no sensors, no computers, nothing. Even the DPF regen system is completely separate from the engine. So if that system were to konk out, the tractor would still run.
I just bought a TYM, and I made sure it was a unit with the Kukje in it, not a Yanmar.
@@TheMindfulHomestead I've got 5 John Deeres,a Ford,and 2 Yanmar tractors. Might be a while but will look into the Kukje engine line.
Personally I don't care about your grass cutting. Sorry😢.
JUNK
Nah
What makes it junk? What happened to yours? What brand tractor do you recommend?
Really enjoyed this video and the things you were saying about your TYM! Donald @ #moneypithomestead