I built and flew this. Maiden was today April 15 2020. The design and construction techniques lead this to be an exceptional aircraft. Both in looks and performance. Well done Julius, well done.
Julian, Everytime I see your videos .I am more amazed at your Crafts. It's a thing envy,and be amazed that out of sheets of foam you bring this to life. Amazing.
terima kasih komennya masbro. Iya awalnya saya pake bahasa Indonesia seperti di video ini, video ini adalah video awal saat saya mulai fokus di youtube. Penonton lokal sedikit dan banyak orang luar yang nyuruh saya pake bahasa inggris, akhirnya saya ganti pake english sekarang.
What on earth are the 70 people disliking?, are they all model kit suppliers? You are seriously good dude, you made me realise I am not a model maker at all but actually just a kit assembler, other people make the model I just assemble them. Don't get me wrong there is a lot of satisfaction from assembling and painting a model to a high standard but it be another thing entirely to have made it from scratch. Subscribed if only for the inspiration, thank you.
Hi Julius, that Phantom is an awesome build. Just watching you give that review towards the end shows how nice and large that model actually is. Maybe you can do a version 2 sometime in the future and show off its flight performance with a bigger motor, and on 4 or 6S. Have you considered trying to install a ducted fan unit maybe. Love the model no matter what anyway. Cheers from Australia. Keep up the good work. I'll be trying out one of your plans soon.
@@JuliusPerdana how can we get your plans on building each aircraft. I’m wanting to build my own edf Jets! I’ve been flying rc helicopters for 20 years and I’m now wanting to fly rc Jets edf and build my own! I’ve actually built my own rc helicopter from Aligns 1st T-Rex 400 which was a clone to the Raptor 50 which had a see saw collective and a servo inside the see saw collective mechanism! In which I didn’t use the whole front end and it’s all up RTF version was supposed to be able to fly in between 800/900 grams! I incorporated CCPM into there 1st grey framed plastic T-Rex 400 and I used HightecH servos and my 1st brushless engine was a HighMax 2025 engine and a 25 amp castle creation speed control. Which I built a 120 degree swashplate and a swashplate guide from having a long screw that went through there spindal and I flew Freyas so I used Hirobo links and ball links. I used a Dremel tool and cut out 3 perfect Servo boxes and screwed them into the frames and then I cut out a piece of wood and took an older broken carbon fiber blade and cut out a 5 inch by 20mm width carbon fiber blade piece and cut out a 5mm by 100mm swashplate guide and my links come out perfect and my first version come out at 419 grams although it was a little underpowered! So when Align copied my design they built the same CCPM that I had but put it in Carbon Fiber plates and was a 450 which I stretched it to a 450 and then put in a Gold T-Rex Astro brushless engine with a golden heat sink and a 35 amp castle creation speed control and it come out at 520 grams and was a solid performer. I run a Futaba 401 gyro and a 9Z Futaba radio and flew it at the 04 Birmingham Fun and then I had T-Rex or Align corporates trying to sponsor me as well as Mikado but I said I had only been flying rc helicopters for 3 years so I’ll wait for an additional 6 years and I had MS composite give me a Hornet 2 and I’ve gotten a few free helicopters like a Logo 10 which I had it with a Hacker B-12 brushless engine with a 80 amp castle creation speed control and 415/425 mm blades and Henry Caldwell was begging me for my Logo 10 power setup but I wouldn’t come off it. I didn’t go lipo because they had just come out in between 03/04 so I went with a 14 Sub C 3300 mah battery in a 14 cell series and it was almost as long as the entire helicopter but it had solid power for 7 minutes and 30 seconds to land which was a great package actually better then lipo because you could fly it super hard 3D and have 30 second time autos in which I flew the crap out of it at the 04 Birmingham Fun Fly and 05 Birmingham Fun Fly. But how do we order the plans to build these beautiful Jets you build!?
I'll tell you I don't care if he's from Vietnam. I'm american and I think the USA should have never entered the war with them. I think he's a very cool smart guy! Thanks Julius. I will make this when I have the time.
Muito bom, desculpe eu comentar em português, não falo ingles e menos ainda seu idioma Me tornei seu fã quando vi os seus projetos de papel e ainda mais com os rc. Eu estou tentando converter o p51 em modelo rc as asas fiz com isopor maciço (de caixa térmica porque em minha cidade é dificil encontrar material para aeromodelismo) parabéns pelo seu trabalho e por compartilhar o seu conhecimento.
Sir, you are an artist. And at 5.8, this incredible model has the cube loading of a gentle trainer. As good as it gets in combining looks & easy flight. Well done!
AWESOME! This is so cool. I'm printing this out today, I gotta make one of these bad boiz! (Next day, and my depron is on order... can’t wait to start this beauty!)
@@madhukarjonathanminj2772 Not yet, I built an FT Master Series Spitfire, which flew like a dream, till a three-strand barbed wire fence inexplicably jumped out of a bush, into the air, and cut my plane into four pieces! So, I decided to build another Spitfire first, before the F4. Funnily enough, I was thinking about the F4, last night.
@@madhukarjonathanminj2772 I can’t vouch for the mini-series, but my Spit was a truly fabulous flier. I beefed up the front of the second one - the foamboard motor mounts don’t take too much abuse. However, the extra weight took the edge off its performance. I will definitely build another, with more changes, but will make sure I don’t add any unnecessary weight. I’ve also built the Simple Scout, that flew well, too. Good luck with your Corsair, they’re good fliers, too, I hear.
Have been impressed with your past projects...but this one takes the cake. Currently helping a friend finish a 1/6 turbine F-16, but we're picking up an electric F-4 to re sharpen jet skills....but your building skills here are humbling. Massive props to you. I'm sending your video to my friend.👍
Congratulations friend Julius! You are a genius! Instant subscription to your channel. Thanks for sharing, I'm building one by following your advice. Hi Lello. From Italy
saya dari pertama bikin pesawat, suka dan selalu pakai teknik ini tapi sampe skarang knapa gk bisa semulus ini, padahal sudah sejak 2 th yg lalu, emang the best lah om julius, oh iya bedanya saya, pecinta sterofoam dekor bukan polifoam
@@JuliusPerdana Another request. Slats/moving leading edges too :p Also something to account for the move in CG like moving battery linked to wing moving.
@@JuliusPerdana :) in the real plane the center of lift moved aft as the wings swept back. That made the plane nose heavy. They fixed it with glove vanes.
Avec un bout de papier de verre un cutter et du depron Julius fait un avion qui a de la gueule et je suis KO devant son ingéniosité! Bravo ! Je mettrais juste un peu plus de poids à l'avant. ;-)
You are absolutely brilliant! One incredible replica of the F4. Thanks so much for sharing this how to video it seems as though you have put huge amount of time and effort into it ! The plans too are also great and the fact that you have shared this project freely is simply amazing! Thankyou! Very well done! Cheers Robert Tasmania Australia
Hy Julius, I live in Peru, Southamerica. I build the F4 Phantom with your drawings. I only changes the retract landing gear with comercials, with I am waiting for end of october. Nice Airplane,thank you.
Ive just cut up the plans, and will start cutting tomorrow, but although i wont need it yet, were is the C of g i may of missed that part ! also, i am planning on EDF not pusher or tractor propellers
Thank you for this, I’ve wanted an RC phantom that I won’t be afraid to crash because it isn’t $600+ USD, and this seems to be my golden goose right here
Hello from Ireland 🇮🇪. This is brilliant I’m 50 and building planes boats subs etc most of my life and you are gifted. The glu you used with the parishment paper is it wood glue
Julius Perdana My depron has arrived, however, I could only get 6mm. Apart from making it a bit harder to bend, (and a bit heavier) can you foresee any problems this may cause? Should I increase the size of the aeroplane by, say, 10%?
Hello Julius! May i ask you COG is at 25.6cm from leading edge? hmm what did you place in nose to achieve the cog? i will not add landing gears so this is just the airframe..does anything change on the COG??
ok Julius but on the video of the PHANTOM F-4 I do not find the play list of the material , the paper replika, the specificities of the plane, the electronics while on the videos of the piper140 and the cessna 172 there is everything?
Hola Julius, una pregunta solamente, me gustaria saber que tipo de papel que usas para entelar el modelo, he buscado y no encuentro, sabes el nombre internacional? Hello Julius, only one question, I would like to know what kind of paper you use to make the model, I have searched and I cannot find, do you know the international name?
Very beautiful all your projects. His explanations allow a beginner to easily build any of the projects. Thank you so much for sharing your knowledge. If you can, please build the Brazilian Saab Gripen. God will reward you.
Julius yet another amazing project.. Even though I’m sure this is beyond my building skills I really wish there was subtitling or it was an English. I can only imagine how much extra work it is for you to include English subtitle ling or translate it to English especially since it’s a two hour video.. Even though I could only watch what was going on I still watch the entire video and Liked 👍👍👍 this video!!! Please keep up what you’re doing
I really like ur work and I m a beginner and I tried to download ur plans but they are not getting open in Adobe I am not able find possible reasons for file not opening
Hi Giulio, I continue with the construction but I have doubts about the numbered piece "F38" not being symmetrical, after glued to the model the tail is shifted to the left side looking at the model frontally, I ask you politely if it is normal or if I made some mistake? Thanks so much.
modify it would be easy, but the EDF unit I don't have. I only have one, I recently bought it for F-35 next month. When I have one more it is possible to modify it
I use a kind of construction glue called “Gorrilla Glue Construction Adhesive”. It has some working time. A thin bead on the spars would save sticking a hot glue gun inside a partially built wing and glue spars simultaneously. I don’t think it will eat the foam. It seems to be some cousin of silicone glue. Additionally, it does not stink like silicon glue.
Muy bonito el proyecto y el video muy instructivo, quería saber si el isopor que utiliza es de alta o baja densidad , ya que quiero realizar un jet F18 con turbina EDF, que me aconseja . Gracias
Hi, please Could you tell me where to place a 70mm turbine for the F4 Phantom, would it be in the same position as the F35 of your build ?, and I would keep the C.G. current?. Thank you very much, I love your work. Greetings from Spain, Seville
Do you use foamboard without paper? I mean the foam that is not covered with paper on both sides? This is xps or epp? Sir, what kind of foamboard do you use exactly in your projects?
Playlist :
02:26 Plan Preparation
05:30 How to make wing
27:13 Stabilizers
29:32 Fuselage
53:26 Covering
1:09:06 Painting and Decal
1:14:13 Landing Gears
1:25:28 Detailing
1:33:03 Electronics
1:38:49 Maiden Flight
1:49:28 Review
IG nya Apa Bang?
hello where did you get your plan.can you please share withme..iwant ti make like yours
Alslam alekum .You are really cool brother.
Do you have a page on Facebook?
@@neevanatienza4610 check on description
I built and flew this. Maiden was today April 15 2020. The design and construction techniques lead this to be an exceptional aircraft. Both in looks and performance. Well done Julius, well done.
congratulations, if there''s a video of it I would love to see it
@@JuliusPerdana do you have an email?
ua-cam.com/video/qOuZeh5h2jk/v-deo.html
Flitetest powerpack C
Hi.what is the wingspan of this plane?
I'm speechless. Just when i thought amazing scratch build RC creators were a dying breed, i find this guy that makes awesome stuff. Subscribed
Thank you so much
@@JuliusPerdana HI What do you use to glue the parchment paper to the depron please ?? regards Martyn.
@@martyndavis5021 its PVAc glue, white wood glue
THANK YOU COULD YOU EXSPLAIN WHERE THE PARTS F29, F28, F31, F32 AND F33 GO PLEASE
ini yg saya suka. pakai bahasa kita indonesia. para penghobi rc puas tutorialnya jadi paham...sukser terus om 👍👍
ini jaman dulu, sekarang udah ganti english
Julian, Everytime I see your videos .I am more amazed at your Crafts.
It's a thing envy,and be amazed that out of sheets of foam you bring this to life.
Amazing.
Channel mahal ini, yg lihat org luar semua, sayangnya orang indonesia banyak yg masih blm tertarik..
Semoga terus berkembang pak
terima kasih komennya masbro. Iya awalnya saya pake bahasa Indonesia seperti di video ini, video ini adalah video awal saat saya mulai fokus di youtube. Penonton lokal sedikit dan banyak orang luar yang nyuruh saya pake bahasa inggris, akhirnya saya ganti pake english sekarang.
Yang ditunggu2 meluncur juga nih video nya jelas banget Om tutor nya. Detail banget. Ditunggu Om video selanjutnya.
terima kasih sudah mampir dan komennya, siap jadi tambah semangat, nanti juga ada yang simpel2 juga
Jadi kepo ni,Itu jenis gabusnya + lemnya apa om, kok kuat banget
Chanel yg begini nih yg pantes viral, makasih om jul udah ngasih plajaran yg sangat berharga ,sukses terus om
terima kasih terima kasih
I really like this, I'm just getting into the hobby after waiting too long lol thank you for this...love your work...8)
you're welcome
Hola Hola padre regálame un avión de eso que que suene la hídrico
✈️🎊🎊🎂⛱️
What on earth are the 70 people disliking?, are they all model kit suppliers? You are seriously good dude, you made me realise I am not a model maker at all but actually just a kit assembler, other people make the model I just assemble them. Don't get me wrong there is a lot of satisfaction from assembling and painting a model to a high standard but it be another thing entirely to have made it from scratch. Subscribed if only for the inspiration, thank you.
hahaha just leave it mate, there is no single video on YT without dislikes, every single of them. So it's kinda normal I think
and thanks for the comment :)
Hi Julius, that Phantom is an awesome build. Just watching you give that review towards the end shows how nice and large that model actually is. Maybe you can do a version 2 sometime in the future and show off its flight performance with a bigger motor, and on 4 or 6S. Have you considered trying to install a ducted fan unit maybe. Love the model no matter what anyway. Cheers from Australia. Keep up the good work. I'll be trying out one of your plans soon.
I already have 1 EDF unit, needs more to be "free" :)
@@JuliusPerdana how can we get your plans on building each aircraft. I’m wanting to build my own edf Jets! I’ve been flying rc helicopters for 20 years and I’m now wanting to fly rc Jets edf and build my own! I’ve actually built my own rc helicopter from Aligns 1st T-Rex 400 which was a clone to the Raptor 50 which had a see saw collective and a servo inside the see saw collective mechanism! In which I didn’t use the whole front end and it’s all up RTF version was supposed to be able to fly in between 800/900 grams! I incorporated CCPM into there 1st grey framed plastic T-Rex 400 and I used HightecH servos and my 1st brushless engine was a HighMax 2025 engine and a 25 amp castle creation speed control. Which I built a 120 degree swashplate and a swashplate guide from having a long screw that went through there spindal and I flew Freyas so I used Hirobo links and ball links. I used a Dremel tool and cut out 3 perfect Servo boxes and screwed them into the frames and then I cut out a piece of wood and took an older broken carbon fiber blade and cut out a 5 inch by 20mm width carbon fiber blade piece and cut out a 5mm by 100mm swashplate guide and my links come out perfect and my first version come out at 419 grams although it was a little underpowered! So when Align copied my design they built the same CCPM that I had but put it in Carbon Fiber plates and was a 450 which I stretched it to a 450 and then put in a Gold T-Rex Astro brushless engine with a golden heat sink and a 35 amp castle creation speed control and it come out at 520 grams and was a solid performer. I run a Futaba 401 gyro and a 9Z Futaba radio and flew it at the 04 Birmingham Fun and then I had T-Rex or Align corporates trying to sponsor me as well as Mikado but I said I had only been flying rc helicopters for 3 years so I’ll wait for an additional 6 years and I had MS composite give me a Hornet 2 and I’ve gotten a few free helicopters like a Logo 10 which I had it with a Hacker B-12 brushless engine with a 80 amp castle creation speed control and 415/425 mm blades and Henry Caldwell was begging me for my Logo 10 power setup but I wouldn’t come off it. I didn’t go lipo because they had just come out in between 03/04 so I went with a 14 Sub C 3300 mah battery in a 14 cell series and it was almost as long as the entire helicopter but it had solid power for 7 minutes and 30 seconds to land which was a great package actually better then lipo because you could fly it super hard 3D and have 30 second time autos in which I flew the crap out of it at the 04 Birmingham Fun Fly and 05 Birmingham Fun Fly. But how do we order the plans to build these beautiful Jets you build!?
I'll tell you I don't care if he's from Vietnam. I'm american and I think the USA should have never entered the war with them. I think he's a very cool smart guy! Thanks Julius. I will make this when I have the time.
Muito bom, desculpe eu comentar em português, não falo ingles e menos ainda seu idioma
Me tornei seu fã quando vi os seus projetos de papel e ainda mais com os rc.
Eu estou tentando converter o p51 em modelo rc as asas fiz com isopor maciço (de caixa térmica porque em minha cidade é dificil encontrar material para aeromodelismo) parabéns pelo seu trabalho e por compartilhar o seu conhecimento.
Obrigado meu amigo
Spettacolo .... un modellista vero ! Nessun costoso attrezzo, materiali quasi di recupero per la struttura , inventiva ed ingegno !! Bravo !!
grazie per il tuo apprezzamento amico mio
Very nice scratch build, respect. I learnt a lot from watching your build.
thank you very much
Sir, you are an artist.
And at 5.8, this incredible model has the cube loading of a gentle trainer. As good as it gets in combining looks & easy flight. Well done!
AWESOME! This is so cool. I'm printing this out today, I gotta make one of these bad boiz! (Next day, and my depron is on order... can’t wait to start this beauty!)
did u build it
@@madhukarjonathanminj2772 Not yet, I built an FT Master Series Spitfire, which flew like a dream, till a three-strand barbed wire fence inexplicably jumped out of a bush, into the air, and cut my plane into four pieces! So, I decided to build another Spitfire first, before the F4. Funnily enough, I was thinking about the F4, last night.
@@crashrr2993 oh cool,i haven't even completed my first plane,an FT mini series Corsair
@@madhukarjonathanminj2772 I can’t vouch for the mini-series, but my Spit was a truly fabulous flier. I beefed up the front of the second one - the foamboard motor mounts don’t take too much abuse. However, the extra weight took the edge off its performance. I will definitely build another, with more changes, but will make sure I don’t add any unnecessary weight.
I’ve also built the Simple Scout, that flew well, too.
Good luck with your Corsair, they’re good fliers, too, I hear.
Have been impressed with your past projects...but this one takes the cake. Currently helping a friend finish a 1/6 turbine F-16, but we're picking up an electric F-4 to re sharpen jet skills....but your building skills here are humbling. Massive props to you. I'm sending your video to my friend.👍
Thank you thank you, I will make EDF plans too as soon as I obtain the units
Congratulations friend Julius! You are a genius! Instant subscription to your channel. Thanks for sharing, I'm building one by following your advice. Hi Lello.
From Italy
thank you, looking forward for it
saya dari pertama bikin pesawat, suka dan selalu pakai teknik ini tapi sampe skarang knapa gk bisa semulus ini, padahal sudah sejak 2 th yg lalu, emang the best lah om julius, oh iya bedanya saya, pecinta sterofoam dekor bukan polifoam
intinya ngelemnya sedikit2 terutama di bagian yg lengkung2, dan sabar nunggu lem dingin
@@JuliusPerdana siap om, oh iya biasanya saya krtasnya gk tak basah in dulu, nti cba lah d basahin dulu, mga bisa lbh rapi hasil nya
om..bikin Tiger Model Curtiss P-40 Warhawk dong...
setuju bikinin bosss @juliusperdana.....yg komplit sama tutornya....
Recomend tuh, bikinin bang Tiger Model Curtiss Warhawknya bang
Setuju bang bikinin dong,lagi tahap belajar
Lagi suka warbridge
@@Bramzed komplitin tutornya auto nonton
ok warbird warbird nanti bakal dibikin juga
gosh darnit. This guy is very skilled. PLEASE Mr. Perdana could you post a video in English on how to make one of these?
Do An F-14 complete with moving wings.
challenge accepted :)
@@JuliusPerdana
Another request. Slats/moving leading edges too :p
Also something to account for the move in CG like moving battery linked to wing moving.
that's a good idea I never thought CG point will be moving, thanks
@@JuliusPerdana
:) in the real plane the center of lift moved aft as the wings swept back. That made the plane nose heavy. They fixed it with glove vanes.
looks very interesting, I like it
Fantastic, just Fantastic, you are a great builder, I don`t think any one in the WEST can do what you have done, keep up the good work Julius.
thanks
Julius you need to comb your hair , your on national wide TV, smile more.
hahaha ok sir
Ilmu yg sangat bermanfaat pak jul .... Semoga kelak dapat gelar bapak aeromodeling indonesia ....
hahaha, thanks ya mas udah mampir
@@JuliusPerdana siap pak jul terus suport chanel yg bermanfaat .... Di tunggu tutuor cara membuat pesawat airbus atau boing 😁😁😁😁😁🙏🙏🙏🙏🙏
How I have parchment paper cover for plane?
Avec un bout de papier de verre un cutter et du depron Julius fait un avion qui a de la gueule et je suis KO devant son ingéniosité!
Bravo ! Je mettrais juste un peu plus de poids à l'avant. ;-)
merci
You are absolutely brilliant! One incredible replica of the F4. Thanks so much for sharing this how to video it seems as though you have put huge amount of time and effort into it !
The plans too are also great and the fact that you have shared this project freely is simply amazing!
Thankyou!
Very well done!
Cheers Robert
Tasmania Australia
you are welcome :)
To make hinges use old credit cards or hotel plastic keys. These are very sustainable and flex with light weight servos. Keep up the good work!
Thanks for the tips!
Hy Julius, I live in Peru, Southamerica. I build the F4 Phantom with your drawings. I only changes the retract landing gear with comercials, with I am waiting for end of october.
Nice Airplane,thank you.
Orang ini perlu disponsori oleh pemerintah sebelum diambil alih oleh orang asing lantutkan om semoga sukses berkarya.
This is amazing, nice work. I bet this would scream with a 64mm EDF. Looks like there is plenty of room for retracts 😁
Can I use EDF 64mm 12 blades on it
2 of them? Off course you can
My son Ricardo, is building an F4 Phantom following your great videos. He really appreciates it a lot. Your video posts.
Ive just cut up the plans, and will start cutting tomorrow, but although i wont need it yet, were is the C of g i may of missed that part ! also, i am planning on EDF not pusher or tractor propellers
Usaha tidak menghianati hasil...
Luarbiasa om jul.. Lanjutkan
trims om Badari Erzet, jadi tambah semangat
These Scratch Builts of you - if I wouldn't have seen them on YT I wouldn't believe. Incredible.
Thank you for this, I’ve wanted an RC phantom that I won’t be afraid to crash because it isn’t $600+ USD, and this seems to be my golden goose right here
Tjakepzzz 👍👌 Sangatzzz
Kreatif ✈👏👏👏💯
Trims sudah BerBagi Ilmunya om 🙏🙏🙏
sama2 masbro
Hello from Ireland 🇮🇪. This is brilliant I’m 50 and building planes boats subs etc most of my life and you are gifted. The glu you used with the parishment paper is it wood glue
thank you, yes it's wood glue, PVAc glue
Thank you for your reply I am going to build the steadman . I will let you know how I get on All the best from Ireland 🇮🇪 keep safe
43:04 f19 already used! If it f39 or f29?
Do you think you could power this with two smaller motors with (folding) props located in the jet exhausts?
The clearance is too tight, too small diameter of propa for sufficient thrust needed
Julius Perdana My depron has arrived, however, I could only get 6mm. Apart from making it a bit harder to bend, (and a bit heavier) can you foresee any problems this may cause? Should I increase the size of the aeroplane by, say, 10%?
Hello Julius! May i ask you COG is at 25.6cm from leading edge? hmm what did you place in nose to achieve the cog? i will not add landing gears so this is just the airframe..does anything change on the COG??
2 AA batteries
@@JuliusPerdana Hmm i had to place 5 batteries so i can get Cog at 25.6cm from leading edge...is that wrong??
Great Job. Beautyfull F-4. From BOGOTÁ COLOMBIA.👍
ok Julius but on the video of the PHANTOM F-4 I do not find the play list of the material , the paper replika, the specificities of the plane, the electronics while on the videos of the piper140 and the cessna 172 there is everything?
it's not in the video but on the description of this video on youtube page of this video. I don't know you watch this on desktop or mobile
yes there is no plans link, I thought it;s there all the time. Okay I'll revise it
please go here paper-replika.com/index.php?option=com_content&view=article&id=9596:f-4-phantom-rc-plane&catid=144:rc-projects&Itemid=207908
Hola Julius, una pregunta solamente, me gustaria saber que tipo de papel que usas para entelar el modelo, he buscado y no encuentro, sabes el nombre internacional? Hello Julius, only one question, I would like to know what kind of paper you use to make the model, I have searched and I cannot find, do you know the international name?
I love it, don’t worry about crashes. This is very real F4 Phantom II. 👍👍👍👍❤️
thanks
your phantom does not have to hide behind a purchased one.
very nice plane
thank you
Very beautiful all your projects.
His explanations allow a beginner to easily build any of the projects.
Thank you so much for sharing your knowledge.
If you can, please build the Brazilian Saab Gripen.
God will reward you.
Thank you so much!
I like his crafts, this man is truly creative.
thank you
Julius - What size sheet bread paper did you use, please, and can you get it online? Diolch yn fawr, Den, Cymru (Wales)
how I have tissue paper cover for plane?
It's name is wax paper
You are the master.. thanks for sharing the knowledge....good job om Julius....
you're welcome and thank you :)
Julius yet another amazing project..
Even though I’m sure this is beyond my building skills I really wish there was subtitling or it was an English. I can only imagine how much extra work it is for you to include English subtitle ling or translate it to English especially since it’s a two hour video.. Even though I could only watch what was going on I still watch the entire video and Liked 👍👍👍 this video!!!
Please keep up what you’re doing
It has subtitle, click the CC icon below
Great build. Downloaded the plan. Complete with decals. Have to finish my current project and after that I will give it a go. Best to you. 👍
MANTAP KREATIF BANGET.....Bro Sukses sllu
terima kasih
Julius, some foto close to landing gear, how you make it?
Are you using white glue for the covering paper. thanks in advance.
Yes, correct
Can you release plans in Full Size? I have a homemade CNC I want to use to cut the peices with.
Fantastic build ... I wish you did kits,prefab build kits ... well done 👏
Cómo se hace la cabina del Extra 300 con una Botella de PET.
No encuentro el vídeo
Nice plane. How did it fly with the 10 inch prop? How did uoy calculate the wing cubed loading?
awesome work bro
thanks
I have a couple of 50mm Ducted Fan turbines availables, do you think that those would work well on this F4?
Yes I think it might
what is you use glue for wax paper ?
I really like ur work and I m a beginner and I tried to download ur plans but they are not getting open in Adobe I am not able find possible reasons for file not opening
What material do you use to cover the surface of the aircraft?
It's like parchment paper, we called it "kertas minyak" in Indonesian.
@@JuliusPerdana min kertas minyak apa stereofom min
@Fallen Angel Lucifer : maksudnya untuk covering polyfoam pake kertas minyak sebelum dicat
Julius Perdana what can you do with that paper. Is it used for cooking.
Buenas tardes desde Bogotá Colombia. Julius,una pregunta , con que pegas el papel a la superficie? Espero me puedas responder. Good job.👍
Nice video! I have been looking for so long to find a real tutorial on how to build a remote control plane and this is it. Thanks!
you are welcome
Brother, kalau guna edf, saiz berapa sesuai?
can you take the plan of the plane as pdf? Google doesn't open either.
EXCELLENT WORK!!!
I would like to see this build with two 80mm ducted fans. You got a gift working with your hands dude,. hats off to you!
thank you, I wish I have them, (EDFs)
Hi Giulio, I continue with the construction but I have doubts about the numbered piece "F38" not being symmetrical, after glued to the model the tail is shifted to the left side looking at the model frontally, I ask you politely if it is normal or if I made some mistake? Thanks so much.
sometime that's happen, just sand on one side and re attach it to make it straight
Amazing. What motor / power combination would you recommend for more power. It seemed somewhat underpowered.
Julius, lei è un genio del modellismo!!
thanks
Sadly that it got damaged by its maiden flight ! Impressive work man !!
What is Body Material, KT Foam Board?
Nicely built and looks good in the air. Landing gear could be a bit better, but much respect for making this.
thanks
Hey Julius, any thoughts about making this an EDF aircraft? Think it's possible with a slight re-design of the aft part of the fuselage?
modify it would be easy, but the EDF unit I don't have. I only have one, I recently bought it for F-35 next month. When I have one more it is possible to modify it
I use a kind of construction glue called “Gorrilla Glue Construction Adhesive”. It has some working time. A thin bead on the spars would save sticking a hot glue gun inside a partially built wing and glue spars simultaneously. I don’t think it will eat the foam. It seems to be some cousin of silicone glue. Additionally, it does not stink like silicon glue.
How to find CG make detailed explaind video. Please sir
Where do you find any of his plans?
Muy bonito el proyecto y el video muy instructivo, quería saber si el isopor que utiliza es de alta o baja densidad , ya que quiero realizar un jet F18 con turbina EDF, que me aconseja . Gracias
Hola Christian soy de México sabrás de casualidad donde consigo el iso por???
Wah hebat mas mantul terbangnya slow lagi cocok bagi pemula yang mau naik kelas ke edf sebagai pesawat trainer.
kalo utk EDF wawat ini terlalu mahal, harus pake 6S karena besar dan min 80mm EDFnya. Pusher aja dulu dan bisa pake 4S kalo mau agak cepet dari ini
How you put the wing into the fuselage?
thanks, this will help with a science fair for a kid! hopefully they pull well...... BUT you can ALWAYS REBUILD!!!
you are welcome
what about different 3s 3300mah 40c and 4s 3300mah 40c lipo battery
Hi, please
Could you tell me where to place a 70mm turbine for the F4 Phantom, would it be in the same position as the F35 of your build ?, and I would keep the C.G. current?.
Thank you very much, I love your work.
Greetings from Spain, Seville
Hello, can you please answer my question from the F4Phantom about placing a 70mm turbine in the fuselage.
Thank you
How long does it take to build this plane?
a month maybe
You are a master and real artist sir !!
thanks man
Om seandainya pakai dinamo bursles 1400kv merek dys bisa gak ? Dan klok bisa ukuran propeller berap?
bisa, pake 8x4
@@JuliusPerdana mkch om
I really love how you put CG markers on your wing.. I don’t Understand why more of the manufacturers of ready to fly planes don’t do that
Do you use foamboard without paper? I mean the foam that is not covered with paper on both sides? This is xps or epp? Sir, what kind of foamboard do you use exactly in your projects?
XPS foam, yes foam board without paper, some call it depron, in here it called polyfoam. It's XPS foam 3-6 mm
Can you do a conversion plan for F-4 Phantom EDF motor?
Thanks!
Wah kreatif banget om julius 👍💖
terima kasih
Where is the Emirates one making Video?
Propeller 9X6 Mantap Om, Trotel 50% Mantap Abis👍👍👍👍
Buat Pesawat Siluman F-117 Om
udah banyak yang bikin, bagus juga plannya
And where is the cg? Center of graviti?
fantasic scale job.....you are skilled ......love it