I miss you baby...i won't be tired watching and listening to you...hearing your voice gives me comfort and all memories we had will never forgotten..i love you and i will always will
USMC motivate me! Meaning someone do something great today, get me pumped. You sir have motivated me. Ive recently purchased the sun dolphin but have started my conversion to bass modificatiins based on and around your design, i just love it that much. Everything in its place is the only way ( the right way)... for some of us. Great winter garage project. Semper fi.
Wow! I have to say I've looked at alot of videos on UA-cam with this boat. All because I'm thinking about getting one also. And your setup is definitely one of the best setups I've seen. Great job sir.🙂🎣
I still have it, i bought a new weld craft 12 foot john boat and new Dohatsu 9.8 hp 4 stroke outboard 2 months ago. Believe it or not i miss using my little pelican!
Thank you so much for the info. I checked with Smith trailers and I would have to put every but and bolt of theirs together. Again, nice boat and thanks for getting back with me.
You are absolutely correct other guy and their ideas about putting 150 lbs. Of B.S on a ten foot boat wow unbelievable it's all about the KISS keep it simple stupid I can certainly appreciate what you have done as far as maintaining room remarkable job yours is one of the top videos on UA-cam the only difference in mine is the rod holders are on the inside above the floor
Very nice. How did you create the front tray for the rods with the half moon pieces of PVC, and did you Velcro all the PVC pieces down, or did you have to use screws any place. I'm just leary of how well screws will hold after some use. Thanks
Many thanks, think i have video on water (short) . Will try to upload it. Im not using it now, had to get bigger boat to take along my wife n daughter fishing...sure miss the little Pelican though.
Wow! Love the organization/engineering! Love the rod storage/staggering and keeping one side open. Smart. How do you like the trolling motor mounting system? Hope you do more videos! Thanks.
I see this was posted 2016. Are you still happy with boat? Thinking about getting one. Is it just as or more stable than 12' Alum Jon boat? Seats look comfortable. Where did you get them? Thanks for sharing.
im 17 and bought one for my first boat i have been in many small boats but this boat is one of the best me and my brother both have plenty of room and it is really stable for a small boat
Beautiful set up. I think I know what to buy for my old 6 horse Johnson. I think it may be overpowered but it’s nice to have power when you need it. Well done.
Great video indeed! I am new to the fishing scene, and I enjoy bass fishing. Last season I fished from the banks. I want to get a boat for the following season, but I don't want to put a lot of money into it. Neither do I want to go cheap. After looking at the various Jon boat, etc. I've decided to go with the Pelican Bass Raider 10E. It appears that this boat will fit my needs. I like how you organized the boat. You didn't mentioned the flooring ... how you did it. Also, about how much money do you have tied up in it. Thanks for the information.
Working on my new Raider 10e. I also like a stowed trolling motor that doesn't take up any deck space. Did you just shim up the area under the frontmost part of the mounting plate. Hard to zoom in, looks like something in the divot above the handle. What connectors to mount the plate? In hindsight would you do anything different? Thanks for any help you have to offer.
That is one nice little set up. And yes I did get some ideas. I think I'm going to go ahead and get me a twin troller x10 and tha will free up the space of your trolling motor but I like how your seat is
Nice setup. I'm looking to retire soon. This should do great for my needs. Thanks for the post. Please post any new mods you come up with in the future.....
to move from front to back, how about a hinge system on the left or right side of the front chair rail so you can flip the seat from the other side without the hinge upwards so you can move to the front or back freely and the seat will be out of the way? just a thought
Hello, hinge is not a good idea. If you look how the seat frame sits in boat...when the boat is in the water the seat bases give support to the sides. When lifted the sides will pull together slightly and seat rail difficult to re engage.
Richard I have been looking and looking for the perfect setup for me. Well I found it in your design! Great build. I absolutely love it. I will be building mine very similar to yours and probably asking lots of questions along the way. You wouldn’t happen to be anywhere near raliegh or Richmond would you as I would love to see this thing in person. I live between raliegh and richmond.
Wow! Best video I have ever seen. You did yourself proud! I have watched again and again. Hope to get one myself real soon. Again, great job my friend, Great Job! Think I'll watch it again. Ha Ha
How did you attach the winch hook to the front of the boat? I looks like the hook is removable so that the trolling motor could be located at the front?
Beautiful job ! I just picked up a Mercury 3.5 hp and should probably get a motor support or transom mount...It looks like the motor is fully vertical with transom mount. What brand did you go with?
Are the trailer bunks underneath the pontoons? Or in the center in between the pontoons? I set my trailer up and am trying to figure out which way would be best
Hello, sorry im not on here much now days. I positioned the bunks on pontoons (inboard of the center ridge. Then set the side bunk / guides as close as possible and she will load good every time. Good luck and tight lines!
question, if you put a casting deck on the front along with the trolling motor do you think that would level out the boat with one person in the back when you go with the motor going (a 6hp)
I love how you mounted the tm I wish you would have shown more of that because I have a raider myself and I just bought a minn kids 55 lb thrust transom mount because I couldn't figure out just how to mount the one like you have but great video bud I received a few ideas for my boat. Btw have you ever thought of installing a phone charger???? If you do please show how you run the wires through your boat. 😜
THIS video is over 5 yrs old but i noticed that boat is only rated at 3.5 hp. wonder if he ever had problems with transom vibration..others have stated there is transom flexing on this boat..
So from reading your comment I assume you used wood screws for your tie down or anchor cleats? Anything else to strengthen them in case used on a rough day with an anchor?
Well done, Richard! Is the trolling motor one of those that uses I-Pilot to keep you in place or travel in a circle? If so, does it work ok with an offset mount like that? Thanks! - Liza
Richard, great review. I'm glad I stumbled across this. I'm looking at the Pelican and the Uncle Buck's Pond Prowler Boat - 10'. Did you consider the pond prowler? They seem similar. Thanks Mike
I miss you baby...i won't be tired watching and listening to you...hearing your voice gives me comfort and all memories we had will never forgotten..i love you and i will always will
Love how clean this boat is and organized a must when fishing!
USMC motivate me! Meaning someone do something great today, get me pumped. You sir have motivated me. Ive recently purchased the sun dolphin but have started my conversion to bass modificatiins based on and around your design, i just love it that much. Everything in its place is the only way ( the right way)... for some of us. Great winter garage project. Semper fi.
This is the best set up on this boat that i have seen so fare...great boat
This is a nice set-up I have the same identical boat. Please share with us how you have your Trolling Motor mounted and secured to the boat
Wow! I have to say I've looked at alot of videos on UA-cam with this boat. All because I'm thinking about getting one also. And your setup is definitely one of the best setups I've seen. Great job sir.🙂🎣
This is a seriously impressive little fishing machine!
Awesome Job on this boat. I am thinking of getting one. I love all the things that you have done to yours. Thanks
Thanks, you really cant go wrong for the money and portability / maneuverability
I still have it, i bought a new weld craft 12 foot john boat and new Dohatsu 9.8 hp 4 stroke outboard 2 months ago. Believe it or not i miss using my little pelican!
Awesome job on the boat!! Working on my boat right now. Thanks for the great ideas
Nice clean setup! I love these pelican bass boats 👍
Thank you so much for the info. I checked with Smith trailers and I would have to put every but and bolt of theirs together.
Again, nice boat and thanks for getting back with me.
I like his idea about a fishing pole holder the best. That is good information about the boat trailer.
Very nice. I like the PVC rod holders. Great idea
Fantastic presentation of an awesome boat.
I would really like to know how he did a couple key things on this boat. one of if not the best bass raiders i have seen.
Great video, and you little boat is very well thought out
Love the boat... This is one of the best Bass Raiders I have seen.
Nice mods , very clean and organized
Best set up I have seen.
Be sure to only put a max of 3.5hp gas motor on one of these. Why the back submerges, great setup man!
You are absolutely correct other guy and their ideas about putting 150 lbs. Of B.S on a ten foot boat wow unbelievable it's all about the KISS keep it simple stupid I can certainly appreciate what you have done as far as maintaining room remarkable job yours is one of the top videos on UA-cam the only difference in mine is the rod holders are on the inside above the floor
Richard, that is a Really nice boat! Good job.
Wow this is awesome I got this boat not to long ago and had no idea what to put on it but now I do thanks man great video
Very nice. How did you create the front tray for the rods with the half moon pieces of PVC, and did you Velcro all the PVC pieces down, or did you have to use screws any place. I'm just leary of how well screws will hold after some use. Thanks
Nicely set up. Imagine what Richard would accomplish with a larger tin boat.
This is exactly what I need for our lake near me. I like this.
love this boat really looking at getting one! I was just wondering if you could do a video of you on the water with the motor running? thanks!
Many thanks, think i have video on water (short) . Will try to upload it. Im not using it now, had to get bigger boat to take along my wife n daughter fishing...sure miss the little Pelican though.
thanks!
Fishing is a solitary thing for a man to do alone.
Hemingway did not call his book”The old man and his ball and chain and rugrat.”
The twin troller is the ultimate 10 foot boat with superior handling.
Can I ask how the seats dont blow out on the road? Very nicely done
Amazing boat!!! Thank you for all the ideas!
What type of seats?? I really like the set up love the rod holders very nice great job 👏
Wow! Love the organization/engineering! Love the rod storage/staggering and keeping one side open. Smart. How do you like the trolling motor mounting system? Hope you do more videos! Thanks.
id love to see more detail on how you mounted the trolling motor!
Nice boat, I somewhat envy your organization. Like your shirt says, those jeans you are wearing are definitely extra. 😉👍🏻
I really like your setup. I just got a Bow Mount Minn Kota, and I was wondering if you might be able to share how you mounted your on the Pelican.
... Yes, and what kind of support underneath was used to keep the mounting bolts from ripping out of the plastic?
.
I see this was posted 2016. Are you still happy with boat? Thinking about getting one. Is it just as or more stable than 12' Alum Jon boat? Seats look comfortable. Where did you get them? Thanks for sharing.
im 17 and bought one for my first boat i have been in many small boats but this boat is one of the best me and my brother both have plenty of room and it is really stable for a small boat
You did a great job on the boat.
Beautiful set up. I think I know what to buy for my old 6 horse Johnson. I think it may be overpowered but it’s nice to have power when you need it. Well done.
Great video indeed! I am new to the fishing scene, and I enjoy bass fishing. Last season I fished from the banks. I want to get a boat for the following season, but I don't want to put a lot of money into it. Neither do I want to go cheap. After looking at the various Jon boat, etc. I've decided to go with the Pelican Bass Raider 10E. It appears that this boat will fit my needs. I like how you organized the boat. You didn't mentioned the flooring ... how you did it. Also, about how much money do you have tied up in it. Thanks for the information.
Working on my new Raider 10e. I also like a stowed trolling motor that doesn't take up any deck space. Did you just shim up the area under the frontmost part of the mounting plate. Hard to zoom in, looks like something in the divot above the handle.
What connectors to mount the plate? In hindsight would you do anything different? Thanks for any help you have to offer.
Boat is setup beautifully.
That is one nice little set up. And yes I did get some ideas. I think I'm going to go ahead and get me a twin troller x10 and tha will free up the space of your trolling motor but I like how your seat is
Yes thoe are interesting, but substantially more money
really good setup i run the same motor on mines and i love it next is a trailer
Thinking about getting this boat soon,thanks for the vid and it looks great,tight lines brother! 👍
You could add head and deck lights for night fishing
Great video, but the Bass Raider is rated for a outboard motor (maximum 3.5 horsepower)! I love your mods, I have one being shipped to me.
Great job, love the video. My husband and I plan on getting one soon.
great review and overlook of your boat, I'm looking to buy this boat. thanks
What did you use to mount the foot control motor on the side? Did you have to shim it?
How did you attach the trolling motor??
I also have a pelican mine is the predator 10.3, and I love it. But i really like what you did to yours, great job👌
Nice setup. I'm looking to retire soon. This should do great for my needs. Thanks for the post. Please post any new mods you come up with in the future.....
Very Very nice.Thanks for putting this up.
to move from front to back, how about a hinge system on the left or right side of the front chair rail so you can flip the seat from the other side without the hinge upwards so you can move to the front or back freely and the seat will be out of the way? just a thought
Hello, hinge is not a good idea. If you look how the seat frame sits in boat...when the boat is in the water the seat bases give support to the sides. When lifted the sides will pull together slightly and seat rail difficult to re engage.
How fast would you say that 6hp pushes it? I have the exact boat and motor but it seems to have a ton of drag but I think your shim tricj might work
Really nice job with the boat. I've been torn between this boat or a fishing kayak.
Love the boat . I want to buy one and I am thinking of getting one very soon.
Richard I have been looking and looking for the perfect setup for me. Well I found it in your design! Great build. I absolutely love it. I will be building mine very similar to yours and probably asking lots of questions along the way. You wouldn’t happen to be anywhere near raliegh or Richmond would you as I would love to see this thing in person. I live between raliegh and richmond.
Wow! Best video I have ever seen. You did yourself proud! I have watched again and again. Hope to get one myself real soon. Again, great job my friend, Great Job! Think I'll watch it again. Ha Ha
Nice Mods...Did you use well nuts for the cleats you installed or do you think screws w/ adhesive are adequate?
And I love the rod holders for sure. I might borrow that one
How did you attach the winch hook to the front of the boat? I looks like the hook is removable so that the trolling motor could be located at the front?
I like your rod holder 😉
Beautiful job ! I just picked up a Mercury 3.5 hp and should probably get a motor support or transom mount...It looks like the motor is fully vertical with transom mount. What brand did you go with?
awesome video thanks for sharing for your next video could you make one you trolling the boat while fishing?
how did you attach the pvc rod holders? looks like you drilled a hole in the top of them to screw them to the deck.
tim johns This is my question as well
Are the trailer bunks underneath the pontoons? Or in the center in between the pontoons? I set my trailer up and am trying to figure out which way would be best
Hello, sorry im not on here much now days. I positioned the bunks on pontoons (inboard of the center ridge. Then set the side bunk / guides as close as possible and she will load good every time. Good luck and tight lines!
question, if you put a casting deck on the front along with the trolling motor do you think that would level out the boat with one person in the back when you go with the motor going (a 6hp)
Very nice sir! How did you mount the trolling motor? Toggles? Rivnuts?
Awesome set up!!
I love how you mounted the tm I wish you would have shown more of that because I have a raider myself and I just bought a minn kids 55 lb thrust transom mount because I couldn't figure out just how to mount the one like you have but great video bud I received a few ideas for my boat. Btw have you ever thought of installing a phone charger???? If you do please show how you run the wires through your boat. 😜
Great boat
Wow ! Really nice what you did to that boat . What type trailer is that ?
Great video!
THIS video is over 5 yrs old but i noticed that boat is only rated at 3.5 hp. wonder if he ever had problems with transom vibration..others have stated there is transom flexing on this boat..
Very nice man
Great looking rig how fast does the boat go with the outboard motor
Do you have a video of the motor pushing the boat
Awesome video! I love the mods you made on this. Update on the boat? Fishing video from the boat?
What did you use to attach the rod holders, and or any other attachments to the plastic??
Will be adding a Humming Bird Fish Finder depth finder soon
awesome boat, hope you don't mind me asking but how did you mount the trolling motor
Will you show how you got the trolling motor mounted please
Dakota Lights agreed!
Yes please make a video of you mounting trolling motor
Yes great idea 💡
Really just an awesome job.
Have you had and problem with the trolling motor mount screws coming loose
Great Video. I have this boat. Looking for the best rear mounted motor for it. Any suggestions?
What size trailer are you using, been trying find one for mine
Sir that is a good looking boat I have the same one but no where as customized
Thanks, one last thing i want to do, install a stick type steering and throttle system. Hahah
thanks
What kind of seats are those, and where did you get them? Did you have to buy a swivel bracket separately? Excellent set up, btw...
nice looking boat. i was looking at these at Dunhams an loved it. what do you use for navigation lights?
I neve use it at night but walmart carries nice navigation lights which would be easy
+Richard Dearing oh ok and i saw those lights at my Walfart. I was just curious. Boat looks good by the way.
Do you have a video of it in the water with that motor?
What kind of material did you use for the Shims for the outboard motor?
What is your floor made of Indiana raider owner
Wow that's one tricked out bass Raider
So from reading your comment I assume you used wood screws for your tie down or anchor cleats? Anything else to strengthen them in case used on a rough day with an anchor?
I just used cleats with 4 small wood screws. Quite strong they have never loosened
The trailer is just a 12 foot jon boat trailer. Mid america Trailers
I got trailer at outdoor world in Washington Indiana
hey nice job on your 10 e . can you tell me where you got them seats ?
How well does it operate in windy conditions, say 10-15 mph. I have a kayak that gives me fits in slight wind. How did you like the 8 footer?
Love your boat..
thanks, just added a new humming bird pirhana fish finder
Well done, Richard! Is the trolling motor one of those that uses I-Pilot to keep you in place or travel in a circle? If so, does it work ok with an offset mount like that? Thanks! - Liza
Richard, great review. I'm glad I stumbled across this. I'm looking at the Pelican and the Uncle Buck's Pond Prowler Boat - 10'. Did you consider the pond prowler? They seem similar.
Thanks
Mike
Im sure the pond prowler is ok too, i just like the pelican design better, and i had an 8 ft before so i stayed with it
How did you mount the minkota to the front
love the boat! what is the largest lake you go on?
Ive had it an a 3000 acre lake known for dangerous winds...did fine