1993 Suzuki Carry Dual Rate Spring Replacement
Вставка
- Опубліковано 15 жов 2024
- In this video, we replace the front springs on a 1993 Suzuki Carry KEI "K" truck (mini truck). These springs are universal, and work on the Suzuki Carry, Suzuki Every, Honda Acty, and Daihatsu Hijet.
The spring kit can be purchased from Harley Rose here: bit.ly/2T3dcpB
All of the tools needed to complete this job can be purchased here:
Socket wrench set: amzn.to/37Axk7o
Blue Loctite: amzn.to/2vE9drg
Scotch-Brite: amzn.to/2uHvLHK
Petroleum Jelly: amzn.to/2SUxG3s
Floor Jack (requires 2): amzn.to/3bSO9Oy
Small Screwdriver: amzn.to/2UV2X94
Gloves: amzn.to/2u88luI
Channel-locks/Cobras: amzn.to/2vEpXih
Work Light: amzn.to/321Y287
If you've ever wondered about what oil filter to use for your truck, it can be found here: bit.ly/37rA5YQ
If you're looking for other accessories for your truck, they can be found here:
bit.ly/3bLLDJA
All of the filming equipment used can be purchased here:
Sony A6300 w/ 18-135mm Lens: amzn.to/38CFHkc
Samsung 128GB SD card: amzn.to/2HvpGAJ
If you're looking for the parts and tools used in this video, they can all be found in the description. Thank you for watching, and I hope it helps! Please subscribe, as more videos will be coming out shortly.
Awesome vid. I will be installing my Harley Rose kit on my 93 Suzuki Dump next weekend.
Wanted to know did you have to grind down the 2020 springs at all to fit the bottom perch or the top cap?
The bottom appeared to fit well in the video but the top looked as if the outer diameter of the spring was to large.
Great video. I like this method better than some of the others I've seen. I'll be doing the progressives on my '95 Carry very soon.
Awesome! Hopefully it works well. Video about the lift will be coming soon. Please subscribe to see what comes next.
I was doing this yesterday and hit a problem. Your vid showed me what I was doing incorrectly. Thanks.
Glad it helped! What was going wrong?
@@Joe-bm4wx I didn't remove a couple of the original parts (bump stop, plastic cup, etc) and I couldnt keep the strut rod from pushing into the strut. I have the older progressive springs from Harley and had to do some grinding to get the seated on the lower perch. The inside diameter was 1/32d too tight. Watching your vid put words I've read into picture and everything clicked.....now to tackle the rear air shocks.
Your vid came up about an hour after I had given up. Serendipity.
Awesome! Let anyone else you know that's having issues to watch my video please, hopefully it helps them. Please subscribe to see what comes next.
Thanks for the video man! I just got a '95 Carry and I'll be doing this same job pretty soon!
Awesome vid. I will be installing my Harley Rose kit on my 93 Suzuki Dump next weekend.
Wanted to know did you have to grind down the 2020 springs at all to fit the bottom perch or the top cap?
The bottom appeared to fit well in the video but the top looked as if the outer diameter of the spring was to large.
Great job! Appreciated the detailed instructions as I'm looking to buy the springs from Harley. Noticed your AZ NRA t-shirt. 1995 Hijet owner here in Pinal County (San Tan Valley).
Thanks for showing want to get these for my mini. Looks easy enough even for someone like me. Lol
New sub here. Keep up the good videos!
Got my 2" lift and new tires on, adjusted camber, etc and now the poor thing hops down the road like a Bunny Wabbit. Not like just when I hit a bump, it's consistently hopping starting at around 25 kph. New 300# springs on the way but it doesn't seam it will help as I didn't feel the hop on the lift, only once I put on the tires. Any ideas?
где можно купить такую??
😅😅😂😂 not sure why I’d have Vaseline or KY lying around in my shop 🤷🏻🤷🏻
Jack stands, jack stands, jack stands… just saying