This is one of 5 printers I own (2 kossel deltas, prusa i3, mecreator) and it works great. Of course I did replace the hot end, the board, power supply and BL touch probe along with a lot of printed upgrades. Of my printers this one is I the one I now prefer. I find these inexpensive printers excellent buys as you get most of the parts and frame work for a good printer if you are ready to tinker and do upgrades. It also helps if you have a lot of spare parts and boards lyuing around. I do not believe that they are good purchases for someone just looking to get into 3d printing and thunk that they will just work great out of the box.
I bought on of these was a bit dissapointed with instructions some things where tit arse about ul know what i mean when uv started putting electricall things together, other than that very impressed, stressed with autoleveling but sorted it
merhaba, bende tronxy x3 yazıcı aldım ama seninki gibi kaliteli baskı yapamıyorum. anladığım kadar kalibresini yapıyorum ama olmuyor yardım eder misin?
I have a x3s and dont know how to make a print, i tried to print out the box and a benchy , the machine would go to the corner, lower , get back up and nothing on usb and with a computer
Hello everyone TopHATTwaffle here videos like these are possible do to my patrons on patreon so make sure to go to www.patreon.com/tophattwaffle and become a patron there so I can continue releasing great tutorial content for you guys
omg ive just bought one of these have had to fix it twice alresdy and still not printed anything not even test print or does a birds nest /mess count wont stick like yours to bed ??????
as soon as i saw all the fasteners in that big bag i was like NOPE. you never get everything you need in those grab bags. i work in light industrial and when assembling stuff if i get a package of fasteners like that where i can't verify every fastener before assembly, i send it back and tell the manufacturer to fix it or fuck off. there's no excuse for it. with that combined with the assembly, i wouldn't even take one of these for free, or punish someone by giving this to them. i think your brother pranked you mate. that waffle thigh reveal though~ ♥~
This is one of 5 printers I own (2 kossel deltas, prusa i3, mecreator) and it works great. Of course I did replace the hot end, the board, power supply and BL touch probe along with a lot of printed upgrades. Of my printers this one is I the one I now prefer. I find these inexpensive printers excellent buys as you get most of the parts and frame work for a good printer if you are ready to tinker and do upgrades. It also helps if you have a lot of spare parts and boards lyuing around. I do not believe that they are good purchases for someone just looking to get into 3d printing and thunk that they will just work great out of the box.
i ended up making alliminium belt holder as i beok them first time out so i made all new alloy ones a replaced all the acrylic ones mint now
Great video, Rocketrascal!
I bought on of these was a bit dissapointed with instructions some things where tit arse about ul know what i mean when uv started putting electricall things together, other than that very impressed, stressed with autoleveling but sorted it
merhaba, bende tronxy x3 yazıcı aldım ama seninki gibi kaliteli baskı yapamıyorum. anladığım kadar kalibresini yapıyorum ama olmuyor yardım eder misin?
I have a x3s and dont know how to make a print, i tried to print out the box and a benchy , the machine would go to the corner, lower , get back up and nothing on usb and with a computer
Hello everyone TopHATTwaffle here videos like these are possible do to my patrons on patreon so make sure to go to www.patreon.com/tophattwaffle and become a patron there so I can continue releasing great tutorial content for you guys
de_york is a bad map
What shelf mounts come with a slot one side & a motor hole on the other???
omg ive just bought one of these have had to fix it twice alresdy and still not printed anything not even test print or does a birds nest /mess count wont stick like yours to bed ??????
Make sure your first layer is close enough.
So at the final do you recommended the printer ?
After having it for this long, it honestly prints great. I love this printer. Just getting started sucked.
Does your brother have a channel?
ua-cam.com/users/timothyhoogland89
as soon as i saw all the fasteners in that big bag i was like NOPE. you never get everything you need in those grab bags. i work in light industrial and when assembling stuff if i get a package of fasteners like that where i can't verify every fastener before assembly, i send it back and tell the manufacturer to fix it or fuck off. there's no excuse for it. with that combined with the assembly, i wouldn't even take one of these for free, or punish someone by giving this to them. i think your brother pranked you mate.
that waffle thigh reveal though~ ♥~
Pure 24 Karat Chinesium
Nice video. Do you have a link to the motor mounts your brother printed?
this: www.thingiverse.com/thing:2222104
thks
Now get 4 more and a fire extinguisher
I have the same laptop as you PogChamp
Oh no. Flashbacks.
yuuuppp
never had wobbling bed
Why dont you just empty it all out on the floor be much quicker