Which wide bladed steel bladed fan of 18" or 16" do you prefer ? Crompton storm 2 , havells V3, Orient tornado 2 , crompton sdx , havells girik or Orient floor supreme
Me also faced the Same problem.. I tired to adjust the rod and tighten screw.. but it's not fixed. If switched on fan rotates 360 degrees angle. What is the solution bro..
Tight the adjustable rod fastener to maximum and then tighten the motor assembly to the small gap given in the rod and that too make the bolt full tight
I don't know which brand you are mentioning about dear sir , obviously metal is better in terms of build quality and performance but plastic can be bought if you are minimising your budget
Yes that is because unlike its competitors V3 and Orient tornado 2 it has capacitor based speed control not winding tappings like the other ones , so because of this mechanism it's 3 speeds seems same
In terms of airflow no , Windstar faratta has more airflow due to bigger and heavier blades , but it lacks features like oscillation and neck tilt , which only storm 2 has
Increasing the air system button available in this model by rope increasing system confuse me I want to buy this one model please explain me positive and negative impact of this fan immediately
Yes in the bottom part there will be a fastener , just loosen that and push it up or down and then tighten it back , the fastener is located right below the metal rod
The quality of the this particular model and this brand has gone down in theese years that's why , I think you should call service center and request for help
@@vasupallivenkataarunkumar563 I could personally send you the video via Gmail but currently I don't have the fan with me , I will try to send you when I get the fan
1. Good oscillation 2. Low noise or no noise at all being bigger blades. 3. Very sturdy and looks good. But 1. Air delivery is not good. 2. Though the fan is heavy and sturdy the speed control is not good. It it breaks.
I bought same fan yesterday. Your video watching after fitting the fan. so thank you very much...
Me also 👍👍👍
How is fan speed
Price
Is the fan noisy ?
Was struggling on how to assemble the fan. Your video was much helpful and we could assemble the fan. Thank you very much for the video 😀
Glad it was helpful ma'am
I have ordered this fan for Rs,3,839 After watching your video, Thanks for the suggestion.
Assembled same fan after watching the video..! Maja aagaya..💥❤️
Badiya
Such a strong fan and 2 pin top, surprising ❗️
That's what it was giving out it's induced body current which I had to stop by putting a 3 core(earthed wire) and a 3 pin top
@@saatvikjacob5754 so it gives a shock with this 2 pin set up
@@selsaranhbt1156 depends
Which wide bladed steel bladed fan of 18" or 16" do you prefer ? Crompton storm 2 , havells V3, Orient tornado 2 , crompton sdx , havells girik or Orient floor supreme
Crompton strom2 and Crompton SDX
Orient tornado 1
Now this is a high quality fan and the one which oscillates even
Yes better than those farattas
Thanks for your video. I Have successfully installed my fan...!!!! ☺☺
Thanks for the excellent demo. Please know how to tilt Dow the fan
Hold the silver grill on top and bottom of the backside of motor black covert and push downards onto the grill
How to tighten the screw just below the motor. I am getting some abnormal sound which might reduce on tightening the screw
There is a hole provided on the steel rod , it has a hole drilled into it to tighten the motor screw. Align the holes and tighten it
Just nw I also bought same fan ...its really vry nice ..with discount Rs.3900 /-
Congrats
I bought it for 3,500/-
@@ds_kumar3182 did you brought them online or offline...
@@ds_kumar3182 good pricing
@@shyamdommeti656 better choice is to get from offline
Unable to fix the oscillation knob. Any inputs?
Did you fixed it? I have the same issue
Can we tilt towards down
@@venkateshVenkatesh-id4yp yes you can
Tnq for ur video after watching I fitted and done tnq very much
Glad it helped
Tq for some information....
Brooo but while iam fixing that iam face some difficulty in the time of 7:30 the screw was not fixed how can go through that
Loosen the screw fully insert into the steel rods gap and tighten it fully again
Me also faced the Same problem.. I tired to adjust the rod and tighten screw.. but it's not fixed. If switched on fan rotates 360 degrees angle. What is the solution bro..
Tight the adjustable rod fastener to maximum and then tighten the motor assembly to the small gap given in the rod and that too make the bolt full tight
But while spinning it's sound gudh gudh. What to do
7:30 bolt is not tightening what to do
Same issue have you fixed it?
Same issue bro
I can't fix it
Kindly..Let me know the noice of the fan.. Is it Loud or Low
It's loud as the blades push out a huge volume of air it's fairly loud
Does FAK FAN is Same as it? And plastic vs metal, which is best? Noise less??
I don't know which brand you are mentioning about dear sir , obviously metal is better in terms of build quality and performance but plastic can be bought if you are minimising your budget
Is this a double ball bearing fan?
No it's double bush
Awesome video ! nice fan ! 😎
Thnx
Normal stand fan ka power consumption kya hai better konsa hai
Better storm 2 hain
Hello bro we where wrongly fit the rod of thz fan we don't know how to get back plz suggest any idea
Can u explain more briefly ?, Where did u fit it
@@saatvikjacob5754 wrongly fixed height adjustment road it will jamed we cannot
@@poojasanthosh.26 request for service /maintenance by calling Crompton service center
@@saatvikjacob5754 ok
Excellent work 👍👍
Very well explained. I have bought this fan today. We are not able different speed change between three modes. All feels same. Is this is expected?
Yes that is because unlike its competitors V3 and Orient tornado 2 it has capacitor based speed control not winding tappings like the other ones , so because of this mechanism it's 3 speeds seems same
@@saatvikjacob5754 that means it will last longer ?
@@upward_onward yes durability wise, but now the brand has deteriorated very much
Thank you friend
The thread which change the speed is broken please suggest how should i repaired
Call an electrician to help or remove the pull cord and put a socket type fan speed regulator there after removing its face plate
Usha Colossus vs Crompton Storm . Which is good??
Storm 2 obviously usha is 3rd party made and quality not up to the mark
Is this better than Crompton windstar faratta?
In terms of airflow no , Windstar faratta has more airflow due to bigger and heavier blades , but it lacks features like oscillation and neck tilt , which only storm 2 has
Thanks 😊 it works
Bush or baring?
Bush hain bhai
How to oil or service cropton creves g pedestal fan 450 mm
Open back of motor by opening screw and then observe carefully u will find 2 ports/holes pour machine oil there
How replace the speed adjustable chain ⛓️ please reply
You can't , you have to replace that pull cord speed operation system with a regulator system
Increasing the air system button available in this model by rope increasing system confuse me I want to buy this one model please explain me positive and negative impact of this fan immediately
Can we adjust up and down of fan
Yes in the bottom part there will be a fastener , just loosen that and push it up or down and then tighten it back , the fastener is located right below the metal rod
Same I'm using since 2months
Switch chain got cut very irritating this switch method
Try fitting a switch type wall regulator in place of the chain
How to head down the fan
Just push the grill from the top and keep your foot on the bottom base for balance
Double ball bearing or not
No it's not a double ball bearing fan , it's a sleeve bearing or bush fan
How to stop rotating the fan please tell🙏🙏🙏
Use pull cord or shut the fan from switch
Over speed how to control brother , any options
I didn't understand bro can u please explain
How is fan speed
1350-1400 rpm
Good suggestion bro
Thanks
How to do up and down direction in this fan.
Just push the grill up or down by holding the back of the motor
Best fan bro , awesome 😊😊👍
Keep it up
Thanks
Wow super bro
Thanks
Same fan but adjustable rod is not pulling out
Try to push it out without your fingers or claim warranty by Crompton or replace it from the shop you have bought
How to adjust the head bro
Push the grill down with both the hands with foot on the base of the fan
@@saatvikjacob5754 bahut tight hai ..tuut to nahi jayega
@@Bharath00 aap motor ke niche ek bada bolt dekhega waha pe machine /oil ya wd-40 daliye aur dekhiye warna Crompton service center ko contact karo
I bought this fan 2 weeks before, but Its getting noisy gradually, when its in rotation
The quality of the this particular model and this brand has gone down in theese years that's why , I think you should call service center and request for help
Bro how to fix back adjustment bolt in this fan
First loosen it and then tighten it inside the gap of the rod
How to change the fan orientation(direction from facing top to bottom ) please reply to me
Hold the back of the fan with one hand and grill of the fan with the other and push it up or down
Super demo
Kya is fan ki power consumption kaisa hai
90 watts Ka power consumption hain
What is the price of this fan bro?
About 3700
3400
Hiw to tilt the fan up
?
Hold the back of the motor and push the grill from the top upwards or downwards
Watt kitna hai
Thanks for the demo.Could you please let us know how to bend the fan head forward or upward.
Hold the back of the motor with one hand , hold the top of the grill with another, push it upward or downward
@@saatvikjacob5754 Thanks for your quick reply.Just purchased this model.It has a remote control.
Bro. Thank you for this. I was not able to adjust the vertical swing till now
What music are you playing
All tracks in the description they are royalty free tracks
How to remove the back cover for cleaning?
Remove screw on back cover and push it out
How to do ups and down pley send me a link
Osm review brother
Thank you bro
Thank u
tq its very useful
Plz, Crompton silent pro table fan ke liye vedio banaye.
Mein Chinese plastic fans nahi Leta Hoon , mein steel/aluminum ka made in India fans hi leta hoon kyuki woh long lasting hain
Aap agar dusre kuch table fan bole toh mein try karunga
Very helpful
Sir how to tilt up and down
Please explain
For neck tilt hold the top part of the grill with one hand and the back of the motor with the other and push it up or down with your hand
Thank u 🙏
Could you explain in a small video for neck part tilting
@@vasupallivenkataarunkumar563 I could personally send you the video via Gmail but currently I don't have the fan with me , I will try to send you when I get the fan
@@saatvikjacob5754 thank you
That motor nab I cannot able tight strongly it moves. When fan rounding
Which part sir explain properly
Cost plz
Around 4500
Havells v3 kaisa hay...
Acha Nahi Hain merko defective havells v3 mila, uske baad main usko replace Kiya aur storm 2 liya
Ei fan er muk ta nichu kre ki kre???
Hindi mein boliye please
Dhore bekiye dilei hobe
What cost u have paid
3800 rupees
@@saatvikjacob5754 thanks
Thanku bro
What about Orient tornado ii
This one is a improvement of orient tornado 2 , that's why I took it
Could'nt tight the motor bolt in the fan stand, it's not get fixing.
Maybe manufacturing defect or screws got rusted
what is wrong with Orient Tornado
not good quality construction and winding quality is extremely poor for orient
Dude seemingly delivering sound than air,, is this true?
Yes
How much cost
3400-3900
How to to ups and down
Fan very good but fan up down adjustment not working
Which one height adjustment or head adjustment
@@saatvikjacob5754 head
@@ramug1073 try to loosen the nut of the head portion with a spanner and apply some oil around that section and then try
Hello sir, excellent review but please show me how to down this fan head.
Hold the back of the motor and push the grill down
@@saatvikjacob5754 Thank you sir
@@saatvikjacob5754 pls send video how to down
Just hold of the back of the motor and push the grill down
Sir it's price???
As low as 3300 to as high as 4000 depends in which state you stay
What's the RPM
1350RPM
Cost bro
Now about 4500 I guess
😎
Very nich background music
Rs
Around 4500
Supr
Bro I need one help
Yes please do ask
works great !
I'm purchase good speed
Motor to stand bolt not tighting
Push it correctly inside the gap and try or else it won't tighten
Bro shot down adjustment
What bro ?
Speed switch not good at all, should be piano switch
যে কোম্পানির পাকা আপনি দেখাচ্ছেন দাদা ওই কোম্পানির পাখা আমি নিয়ে এসেছি আর চার দিন পাইপের মধ্যে নাট টাইট
1. Good oscillation
2. Low noise or no noise at all being bigger blades.
3. Very sturdy and looks good.
But
1. Air delivery is not good.
2. Though the fan is heavy and sturdy the speed control is not good. It it breaks.
Total many West product
इसका भाव
Aap bolna kya chahte hon?
What's price
3700 rupees