FYI, I found this information on how to switch the Speedometer from KMH to MPH. It works! Apollo Commander 200 KM/H to MPH on the Display 1. Press the "SET" Button and Hold 2. While the SET Button is press, turn the key to the on position. 3. let the display to it count down check 4. When that is complete your KM/H should MPH. Hope that helps
I now have two of the Commander 200 and when changing the gear oil, I can not get the fill screw lose. I have tried different 10mm sockets and wrenches and nothing seems to grip it enough to loosen it, I am afraid to keep trying, I may end up stripping it. Any suggestions or tips. One of the ATVs I had to refill using the drain hole with the ATV on its side, since I already drain the fluid.
Hi there, I just purchased one, but to register it in my hometown i need an 'COC-Document" My Seller doesnt have it. Do you know where i can get one? its a certificate of conformity"?
i have an apollo commander 200 and its brand new but when i turned it on it the led dash shows when i hit 7k rpm it bogs down and i need help fixing the problem
Hello friends, greetings from Chile. I have an ATV Apollo RFZ Commander 250cc ATV, can you tell me which bolt should be removed to change the oil? Thank you so much.
Another question. You mention is some videos that you should only use 91 octane in chinese ATVs. What about ethanol free 89 octane? I though ethanal free is the way to go in 4 stroke engines. Thanks
FYI, I found this information on how to switch the Speedometer from KMH to MPH. It works!
Apollo Commander 200 KM/H to MPH
on the Display
1. Press the "SET" Button and Hold
2. While the SET Button is press, turn the key to the on position.
3. let the display to it count down check
4. When that is complete your KM/H should MPH.
Hope that helps
IT WORKEDDD
Thank you!
Hi , thank you for the video !
What kind of gear oil do use?
80/90 Gear oil
I now have two of the Commander 200 and when changing the gear oil, I can not get the fill screw lose. I have tried different 10mm sockets and wrenches and nothing seems to grip it enough to loosen it, I am afraid to keep trying, I may end up stripping it. Any suggestions or tips. One of the ATVs I had to refill using the drain hole with the ATV on its side, since I already drain the fluid.
Tip: clean the bolts thoroughly with a good parts cleaner after you can either use a little heat and or a WD-40 solution
Hi there,
I just purchased one, but to register it in my hometown i need an 'COC-Document"
My Seller doesnt have it. Do you know where i can get one? its a certificate of conformity"?
MCO certificate. You can contact a local dealer or go direct to Apollo USA
Is the drain screw whaser made of copper or alluminium? Who mm??
Nice job, thanks for the helpful tips!
Thank you
I brought one and it wont move in neutral or reverse. It will crank. Can you provide any recommendations?
Always appreciate these videos 👍
What type and how much gearbox oil do you recommend when changing?
Gear oil 80/90 flush with the fill bolt
Are both bolts underneath to drain the gearbox or only the front? If not, what is that second bolt for?
The 14mm bolt I think is for the chain tensions
What oil is used for the transmission?
How much kilometes are the engine break in?
i have an apollo commander 200 and its brand new but when i turned it on it the led dash shows when i hit 7k rpm it bogs down and i need help fixing the problem
Your main and idle jet may need cleaning
aswome info ,where can I buy the engine 174,4cc
Contact Vitacci motorsports in Texas
I changed the spark plug, battery and put oil and gas and my commander 200 doesn’t want to turn on. What else should I check for?
Need more details. Does it crank over ect?
@@MOTORSUncut it wants to crank, but stalls and doesn’t want to start all the way besides the lights being on
Watch a video we made: Why does my ATV Bog Down@@juanvaca-ramirez4858
Hello friends, greetings from Chile. I have an ATV Apollo RFZ Commander 250cc ATV, can you tell me which bolt should be removed to change the oil? Thank you so much.
@@sarodriguezm watch the video on service: Commander 200. Will help you
Another question. You mention is some videos that you should only use 91 octane in chinese ATVs. What about ethanol free 89 octane? I though ethanal free is the way to go in 4 stroke engines. Thanks
91 Octane is recommended. I would use the manufactures recommendation.
I left mine out in the rain .. can't someone please help me my dad figure out how to make it start again 😅 what kind of wires need replaced ?battery?
I got one that runs and idles fine but when I start going it bogs down what is causing the bogging
You can check the carburetor main and Idle jet that may need cleaning
What type of oil does this take?
4 stroke, 10/40, 10/30 motor oil
Thank you!
Can you show how to adjust the brake system please?
The brakes are hydraulic and do not have an adjustment. Check the brake pads and brake fluid if your brakes do not function as they should
@@MOTORSUncutwhere can I buy the brake pads?
@@Stanced-ej8 Contact the dealer you purchased from.
@@Stanced-ej8 Contact the dealer you purchased from.
what is the transmission oil of CVT syatem?
Recommend 80/90 Gear Oil
@@MOTORSUncut every few kilometres it changes
How do I take replace the carburetor
The front body upper and side panels gas tank may have to be removed to gain access
What type of oil filter does it take I can not find the part number for it
No oil filer on this model
What is the tire pressure?
Tire pressure is located on the sidewalls of most tires.
Where are you guys located?
The store front is located in Reno Nevada. Scooter City Reno.
Just bought 2022 Apollo VRX-F 200CC BUZZING! Update just bought a real bike Polaris 570 sportsman trail
Very informative!
Very helpful info!
😀
Better off buying a used Honda or Yamaha. These Chinese ATVs are complete junk.
Appreciate the feedback