I actually had an “A/C specialist” take a look at my system and he literally spend days trying to fix my system with no luck. Thanks to this video I was able to find the problem! The unit kept displaying E1 and it turned out the power wires were reversed. Problem solved in about 5 minutes! Thank you ⭐️⭐️⭐️⭐️⭐️
Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) ua-cam.com/users/postUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.
I have an intertek unit. Been installed for couple years & has been fine. We get a big rain & now I get this error code. If this just occurred for the first time… wouldn’t the wiring already be right? And it’s the storm that somehow messed with it? It’s the only appliance that was affected.
Thank you for your question! Please reach out to our US based customer service team at 844-472-2473 Mon-Fri when on site the machine so we can collect more information on your system.
in that case there is module inside the inside unit the one where the wires connect to, its about 85$ here in canada but you get that from goodman company if your unit is a goodman hope that helps
Hi. Bless you !!! I have one question. One mini split Frigidaire have E1 code. When i see the control board i note a little burn mark over it. I dont note any component burn . How i can verify if is the control board the problem ???
Hi Jose, I cannot speak with certainty about Frigidaire units, but have you experienced any storms lately? Is there a surge protector on the unit? E1 normally means there is a communication fault between outdoor to indoor units, and if there is a burn mark on the board, it more than likely means the outdoor board has been shorted, or a possible blown capacitor. Especially if it did storm before giving the E1 with no surge on the disconnect box.
Walton AC comes E1 code sometimes but all is well! Please tell, whats the story of them big puppys ....There will be no problem if run!! Please tell me?????
Thank you for your question! Please reach out to our US based customer service team at 844-472-2473 Mon-Fri when on site the machine so we can collect more information on your system.
in that case there is module inside the inside unit the one where the wires connect to, its about 85$ here in canada but you get that from goodman company if your unit is a goodman hope that helps
Thank you for your question! Please reach out to our US based customer service team at 844-472-2473 Mon-Fri when on site the machine so we can collect more information on your system.
Hello,my kenstar 1.5 ton ac ....usme E1error show ho rha bnd kiya tha bilkul achchhi condition m.. Uska remot khrab ho gya tha online nya remot mgaya aur jaise hi use kiya error show hone lga how to fix my problem
Hi Thomas, if this is a Perfect Aire mini-split, please take a picture of the error code and send it to support@perfectaire.us where one of our customer service representatives can help!
What if my AC has been working for a while before and now it has E1 error after maybe 2-5 minutes of it running. For example, whenever i turn on my AC for 5 minutes it shut off and turn to E1 error. I cleaned the filter. It was working before so the wire must at the right spot. :(
in that case there is module inside the inside unit the one where the wires connect to, its about 85$ here in canada but you get that from goodman company if your unit is a goodman hope that helps
@@randynBroncos it happed to me twice Once was the communication wires Second goodman told me to change the module in the inside unit if that didn’t help The module or the board in the outside unit Fortunately worked with the module in the inside unit
Hi Lea! If you still need assistance with the E1 error code, please contact us at 844-472-2473 Mon-Fri when on site with the machine so we can troubleshoot.
I actually had an “A/C specialist” take a look at my system and he literally spend days trying to fix my system with no luck. Thanks to this video I was able to find the problem! The unit kept displaying E1 and it turned out the power wires were reversed. Problem solved in about 5 minutes! Thank you ⭐️⭐️⭐️⭐️⭐️
Thank you for the feedback and happy to hear this video helped! :)
How did they get reversed tho?
Are there tiny little men in there messing with it???
@@kennethcortez3586 I think it got reverse since the 1st time the careless technician installed it.
@@GuuiYaeand leave you with a non working a/c?
Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) ua-cam.com/users/postUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.
In other words, get an Airconditioning specialist!
JUST TRIED THIS AND IT WORKS!!!!! THANK YOU SO MUCH ! SUBSCRIBED 🎉 (thought it was not enough refrigerant)
Thank you for the support! :)
I have an intertek unit. Been installed for couple years & has been fine. We get a big rain & now I get this error code. If this just occurred for the first time… wouldn’t the wiring already be right? And it’s the storm that somehow messed with it? It’s the only appliance that was affected.
So what do I do when it has worked perfectly for ever then shows E1? Cannot possibly be reversed wiring??
mine did that afther i replaced the fan because it became slow and noisey i have ordered a new board i hope this work
Thank you for your question! Please reach out to our US based customer service team at 844-472-2473 Mon-Fri when on site the machine so we can collect more information on your system.
in that case there is module inside the inside unit the one where the wires connect to, its about 85$ here in canada
but you get that from goodman company if your unit is a goodman hope that helps
Hi. Bless you !!!
I have one question. One mini split Frigidaire have E1 code. When i see the control board i note a little burn mark over it. I dont note any component burn . How i can verify if is the control board the problem ???
Hi Jose, I cannot speak with certainty about Frigidaire units, but have you experienced any storms lately? Is there a surge protector on the unit? E1 normally means there is a communication fault between outdoor to indoor units, and if there is a burn mark on the board, it more than likely means the outdoor board has been shorted, or a possible blown capacitor. Especially if it did storm before giving the E1 with no surge on the disconnect box.
@@PerfectAire good
Walton AC comes E1 code sometimes but all is well! Please tell, whats the story of them big puppys ....There will be no problem if run!! Please tell me?????
Did we have to cut power supply of house or we hve to cut pwr supply of MCB of ac
Hello, the power supply of the AC.
@@PerfectAire thnx
Is this a newly installed unit?
My units not turning on at all
What happens if I get this error after 3 years of usage?
Thank you for your question! Please reach out to our US based customer service team at 844-472-2473 Mon-Fri when on site the machine so we can collect more information on your system.
in that case there is module inside the inside unit the one where the wires connect to, its about 85$ here in canada
but you get that from goodman company if your unit is a goodman hope that helps
So what do I check if my values at 2 & 3 stay positive while checking DCv ? Thank you
Thank you for your question! Please reach out to our US based customer service team at 844-472-2473 Mon-Fri when on site the machine so we can collect more information on your system.
outdoor board is bad
Hello,my kenstar 1.5 ton ac ....usme E1error show ho rha bnd kiya tha bilkul achchhi condition m.. Uska remot khrab ho gya tha online nya remot mgaya aur jaise hi use kiya error show hone lga how to fix my problem
Is it ok if I use AC. showing E1 code in night. Is it safe..?
How much sir to fix e1 error in bluestar inverter ac
If it a easy fix save money if not it better to get a new one
Paano mag fix Yung carrier aircon
B5 how to fix bro
EL 01 error code blinking what is the solution
Hi Thomas, if this is a Perfect Aire mini-split, please take a picture of the error code and send it to support@perfectaire.us where one of our customer service representatives can help!
@@PerfectAire Who is Thomas?
Paano Aircon Yung E3 Carrier
Troubleshoot yong Aircon E1 kaya
On my split I found EE but second E reversed in front of first E. What mean?
thats e3?
@@jakepropst6479 yes
Yung carrier aircon walang 16 na number
3 players na fix Yung Aircon kaya ginagawa 17 na lagyan Yung turbo
Yung Aircon carrier E3 ayaw gumana mag andar
E3 how to fix thank you.
Hi Roberto, check out our video on the E3 error here: ua-cam.com/video/SSp1dQr9yl4/v-deo.html
What if my AC has been working for a while before and now it has E1 error after maybe 2-5 minutes of it running. For example, whenever i turn on my AC for 5 minutes it shut off and turn to E1 error. I cleaned the filter. It was working before so the wire must at the right spot. :(
in that case there is module inside the inside unit the one where the wires connect to, its about 85$ here in canada
but you get that from goodman company if your unit is a goodman hope that helps
@@FamillyFunTimeow do you know it is the board on the inside unit? Could it be the circuit board in the outside condenser? Mine is a Goodman unit
@@randynBroncos it happed to me twice
Once was the communication wires
Second goodman told me to change the module in the inside unit if that didn’t help
The module or the board in the outside unit
Fortunately worked with the module in the inside unit
Hi Lea! If you still need assistance with the E1 error code, please contact us at 844-472-2473 Mon-Fri when on site with the machine so we can troubleshoot.
Blue Yung electric fan tapos panglamig
Hindi yong E3 E1 yong
I'm watching error aircon
This music is awful
Tendría tener traducción a español no sólo en inglés desde Ecuador te saluda
Watch ko error Aircon lang E1 troubleshoot
Ang dummy number 62
Thank you for the suggestion!
Thanks
My ac error E1
Please contact us at support@perfectaire.us
Yung number Ang dummy lang 62
I have sophia 36000bty. E1 error. Wire good, power good, motor good. I replaced pcb board but anyway E1.
Классное видео. Жаль ни слова по русски. Но как нельзя кстати, надеюсь поможет с моей beko
You must learn English. Putin khuilo
WHY FUKIN MUSIC AND NOT INSTRUCTION..
Ang dummy number 62
P6
Chodu mat bana bhaiii
Too complicated. Just call a pro pr buy a new unit.