@@carpandcatfishbaitstipstri7309Im subbed already and i enjoy your videos on baits for carp and you've help me tremendously with the video on clean 6500 ambassaduer. I appreciate it. Thankyou and your channel has huge potential. Good job👍👍👍👍
Use some rubbing alchole it cleans the grase right off and gets the stains of it out! I do it with mine all the time just dont use on painted parts or side plates itll eat at the paint eventually!
To remove the cog wheel without damaging the shaft take a 3 foot line of 40 pound braid line doubled over and wrap it around the underneath of the cog wheel and and give it a quick pop pulling straight out and the cog will pop off and you didn’t damage the shaft which is a fixed part p. s. Be sure to double the braid line before wrapping underneath the cog wheel. Works like a charm
when installing new spool bearings (I have the upgraded unsealed kind where you can see the ball bearings on one side) does it matter if the bearings go in face down or face up?
There is no modding that needs done they have a 6 pin breaking system and you can turn on as many or as little as you like. To turn them off you push them in till the pop in place. To turn them on pull it out till it slides up and down
I am terrified of doing this... I got a lot of money in my Ambassadeur's, from the 4600c3 to 6500c3. I know they aren't super expensive but I'm not rolling in $$ either. I've been adept at taking things apart all my life, but it's putting things back together, even with instructions LMAO
GREAT INTRO!!! One of the best videos I've seen showing how to do this. Great work....
Thanks I appreciate it.
@@carpandcatfishbaitstipstri7309 I've shared your video on my Facebook fishing page....
Awesome. Ive seen allot of your videos. You have some really good content.
Im serious Abu Garcia needs to reach out to you and sponsor your channel brother. Your channel is educational as well entertaining
Thanks for watching. I wish they would lol
@@carpandcatfishbaitstipstri7309Im subbed already and i enjoy your videos on baits for carp and you've help me tremendously with the video on clean 6500 ambassaduer. I appreciate it. Thankyou and your channel has huge potential. Good job👍👍👍👍
Use some rubbing alchole it cleans the grase right off and gets the stains of it out! I do it with mine all the time just dont use on painted parts or side plates itll eat at the paint eventually!
Thanks bro! Helped me out tearing down my 5500 s
I have the pink pro rockets, but those pink and black carp commanders are bad ass!!! Great video! New subscriber!
Thanks appreciate it.
To remove the cog wheel without damaging the shaft take a 3 foot line of 40 pound braid line doubled over and wrap it around the underneath of the cog wheel and and give it a quick pop pulling straight out and the cog will pop off and you didn’t damage the shaft which is a fixed part p. s. Be sure to double the braid line before wrapping underneath the cog wheel. Works like a charm
I wish i took care of anything as good as you take care of those reels lol
When I used bait runners I beat em to death lol.
Good videos! Definitely buying a nicer Abu or a piscifun
Thanks for watching
when installing new spool bearings (I have the upgraded unsealed kind where you can see the ball bearings on one side) does it matter if the bearings go in face down or face up?
doesnt really matter Id recommend putting the open side down to keep dirt from getting in so they do not need to be cleaned as often.
Great video very informative
When you say you only run 3 breaks. Do you mod them so only 3 work?
There is no modding that needs done they have a 6 pin breaking system and you can turn on as many or as little as you like. To turn them off you push them in till the pop in place. To turn them on pull it out till it slides up and down
I am terrified of doing this... I got a lot of money in my Ambassadeur's, from the 4600c3 to 6500c3. I know they aren't super expensive but I'm not rolling in $$ either. I've been adept at taking things apart all my life, but it's putting things back together, even with instructions LMAO
I just got some new rockets what is that knob that everyone says not to mess with on the side
The reason a rocket has to knobs is to center the spool then adjust each one equally to dial in the tension
Does anyone know what the cs mean on the rockets
Why use lighter fluid?
it gets the grease out of the bearings makes them spin allot longer
@@carpandcatfishbaitstipstri7309 Will any degreaser work? Carb cleaner, brake cleaner, Isopropyl Alcohol, etc.
just just just just some people arent tha good anybody can take apart gotta put it back if you want to use it
日本で発売されないかなぁ
Lol 5500s don't spin that good, cog wheel and other parts are pretty cheap on the 5500s