@@looney2be Tnanks. I cant beleive i still answer the questions about over one year old build. It's definetely 80mm fans. Try to get the PWM ones, the regular ones with 3 pin are quite loudy.:)
@@AKTechMods yeah i'm building inside the same case. And wondering if i can fit small fan behind. Do you drill extra hole or just using existing hole? Thanks for responding.
@@looney2be It needs to be definetely drilled new holes. Make sure to measure the holes from inside while the case laying on it's back. Two side adhesive tape would help to hold the fans on its place. Good luck.
There are so many famous youtubers that call themselves "Professional" Custom Loop Builders but not a single one of them do the easiest, simplest and safest leak test. Air Pressure 8:49. Thumbs Up man. You are one of the few that actually show how its supposed to be done.
@@gamerdweebentertainment1616 If there is a big leak yes but if its a small leak it would not go all the way down / would go down very slowly. Any pressure reduction a leak sign .
I was wondering what he was doing. I'm new to building PC's so I've been watching videos and reading comments xD I hope one day I can build a beast like this
Shinochaos it’s not rocket science you just need to know what parts screw into the proper places... honestly just off of this video alone you can probably put 2 and 2 together to figure out how it’s built if you have all the right parts.
I mean id rather be poor than stupid for spending this much on looks. As far as performance increaae its minimal at best. Even conventional air cooling is still sufficient enough for any gaming rig.
@@prototype8137 True. I respect the uploader's effort and he obviously has the budget for it but this feels too over the top for me. If I was to watercool I'd probably run the simplest loop possible but yeah performance gains aren't really worth it.
@insaane it's not needed though, i've ran a custom watercooling since 2-3 years now that cost me like 130$ total, looks amazing and works perfectly fine.
OMG You are one of the first I've ever seen use a pressure tester on the lines versus lets.cross fingers and run coolant thru it and hope for the best. Thumbs up just for that one alone
@@Janoww It's a leak test... By pumping air in and monitoring the pressure, he can be sure there will be no leaks. Better than just throwing in the liquid and hoping for the best.
Wow. Amazing work! I came across your channel while researching custom water loops. I've been building PCs for 20 years but never did a custom water loop. Completed my first one 2 months ago and now I'm hooked. Your builds have inspired me to do more. I've already ordered an Antec Torque for my next build and can't wait for all the parts to come in. I've never been one to spend money on the "art" side of computer building and preferred to put all of my funds towards higher end components, but the building part has become almost as much fun as actually using the computer for me. Keep up the great work. I hope to one day get into designing and fabbing my own custom water blocks and distribution reservoirs like you've done.
This is an incredible, & fantastic build. Your attention to detail is incredible. With everything matching. From the SSD, M.2, Fan Covers, & The GPU. I have never seen a Gold Dragon Graphics card. You sir have a new subscriber. Dan.. This is a work of art.
i only dont get it why ppl not using custom power cables for ssds, stock modular wire not look good, ssd needs only 5V + GND so you can do 2 wire cable which will cost about 6-7$ sleeved
Excellent work man. I knew right off the bat just looking at your fitting assortment... there was insane attention to detail in planning this build. Good work.
Hang on there falks. The Golden Dragon V2 is coming up soon. Got meanwhile multiple ongoing project(s) and they are also on hold due to this pandemic disaster. By the way, stay strong and stay at home . Together we'll beat this too.
@@AKTechMods i am looking to do a black/gold build and am wondering if you painted out the ram/post screws? seem to have perfect color match. If so what paint did you use and where can i get those post screws at?
@@wintejr i didn't actually paint myself. All the colors are original. I just did cherrypick the colors after a long search. Thumbscrews and fan covers are from aliexpress/Formulamod. The recent build which i am working on it (G-D v2 ) will have custom paints.
I was just about to ask if you entered this in the builds.gg challenge then I scrolled down and saw that you did you definitely have my vote. singularly one of the best looking pc builds I have ever seen built, amazing truly.
Yeah, that font is pretty ugly... a much more simple, less-stylized font would have been a much better choice in my opinion. But it’s not my computer! It’s his.
Many have been asking about the in&out-take fans setup. It's just for the show. Good that so many have been attracted with it;). Now wait for the next build with in&out-take fans. :D
Awesome build, looks incredible. My personal opinion the RGB fans detracts from your build maybe full white colour instead of flashing colours.will be voting for this however !!
Looks great and all...but you got 1 Basic dead wrong AirFlow!! All fans are set up to grab air from center of case and push it out. However you got NO fans pulling air into the case. At least, it sure seems to look that way.
When I saw the title I thought Geil was re-releasing their Golden Dragon memory line, and you were using it. I owned a Golden Dragon pair of memory modules, they were gorgeous almost 20 years ago.
@@Insaiyanrider G.Skill has a bit lightgold color and adata has a bit darker/chromic gold color. Adata matches perfectly with bykski''s gold colored fittings, pomp-cover and cpublock.
Pure aesthetics and makes zero difference in thermals. Plenty of space for air to enter through holes in the case. Also, looks like the 2 80 mils on the top back might be intake.
Beautiful video, love it 😍. This pc has so much detail in it... don’t forget that filming while building a machine like this, drastically lengthens the time. This makes it even more of an achievement! Thumbs up 👍🏽
10+ months later and this is TOP TIER BUILD NO DOUBT. Artist, builder, and brilliant. I'll subscribe and look forward to some testing AFTER drooling overtime build- this would set you OUTSIDE AND ABOVE the illusory idea that after a build there's no testing done- why?; and it's frankly NO REASON ergo "illusory". HATS OFF TO YOU AK. Awesome build !!!
I really want to know where those gold thumbscrews used on the motherboard came from. Or at least what threading that is so I can try and find something similar. Is it m3? 6/32?
wicked build. But... that front reservoir would drive me nuts. The way the coolant is getting in-between the layers of acrylic where it shouldn't be would drive me nuts. Also the fallout from the opaque fluid is going to build up in there reallllly fast. awesome attention to detail tho. I like the colour matched thumbscrews for mounting the mobo a lot.
Thanks for the nice comment. Appreciated. Imagine that distro as a hourglass which sand is flowing down constantly. Sad that it can't turn upsidedown:D.
Where'd you get the gold stand off screws? I'm looking to do a white / gold build myself over the course of the next year, and trying to track down gold accent stuff is going to be a pain in the ass, I can already feel it.
@@AKTechMods I saw and clicked- GLAD I DID! This INHERENTLY shows you are both an incredible builder AND an artist. I'll subscribe after this 1 vid. Better in my opinion as ALL WONDER- a few tests after the satisfying minutes looking at angles of the completed build. Pressure gauge = contender HA! Hats off AK.
Actually all of the Yellow fans are in-take. The transparent/cristal fans in the back (Which are barely noticible) are the exhaust fans to let the air out.
So old Margery hears the music coming from iPad and takes interest in the video. She sees a bunch of parts being assembled and asks “what are you watching?”.. I calmly look at her and in a serious straight face manner reply.. “porn”. Then continue to watch the video. She stands there for a few seconds, slowly turns, leaves the room and closes the door behind her. #truestory 😂
That was a work of art. What I like about the dynamic/dynamic xl case is it let's you express yourself fully by giving you a blank canvas. I had the corsair 680x before but that case is more beautiful from the go but it can't be fitted with a loop like this. The dynamic is more beautiful when you install an awesome loop like this.
@@bradeyburton5751 RGB doesn't mean "let's puke rainbow everywhere". Statically controlled, it can help promote the aesthetics of the build by adding to the primary or attention-drawing secondary colours. In this particular case, a nice white could add to the build to make the rest of the components "pop".
WOW, i'm impressed beyond words, this looks absolutely amazing. I'm just getting into water cooling (AIOs don't count) and i was also looking into the PC-O11DW and the Distro Plate and i stumbled upon your build and I'm just blown away. Wish i could do something like this with my build. BRAVO!
I've seen a lot of watercooling builds but something about this one is just so much better than all the builds on youtube. was looking for parts today and saw a cpu block I liked that reminded me of this build. turns out it was the same one. I really want to recreate something like this, it's absolutely stunning. props.
Bro, this vid is the sexiest pc i've ever seen man! good job! I was wondering how much this set you back? I want to build this but I dont have money for custom cooling and a 2080 TI, are there any other substitutes?
OMG, i'm glad someone else caught that. It literally doesn't have a single air intake fan. Also, air can really only enter the case by the graphics card where the vent holes are, maybe a bit through the top on the far right and same with the bottom (though because of the rad on the bottom, would just end up sucking in warm air).
I've just come across this video and I have to say, your work is brilliant. However I'm concerned about the fan configurations. They are all set to exhaust. I can't see the intake fans, correct me if I'm wrong.
please don't flame me , im still learning. are the vertical triple fans intake? and the dual top and bottom fans pushing air through the rads? It looks like they all are exhaust so im confused
Based on benchmarks and actual gameplay footage, the RTX 2060 is indeed better than a GTX 1070. The name itself is pretty confusing as people might think that the 2060 is a graphics card that replaces the GTX 1060, as a mid range card. The RTX 2060 is an upgrade in the sense that it is way better than a GTX 1060 as it is capable of playing games at 1440p comfortably, which automatically puts it somewhere in the “high end” gaming segment. Which of the GTX 10 series cards were mostly aimed and meant for Full HD+ gaming ? The 1070 and the 1070Ti. On paper, the RTX 2060 has just as many CUDA cores as the GTX 1070, while the 1070TI is way ahead, in terms of CUDA cores, at least. Still, the number of cores a graphics card has proves nothing on its own if we don't pay attention to the rest of the spec sheet, which is exactly why the RTX 2060 comes ahead of its two older gen counterparts in pretty much all benchmarks and games. The RTX 2060 is at least comparable, if not faster than the GTX 1070 TI which is still a high end card, hence the former's pricing at around 350$. Similar performance, similar pricing. If the RTX 2060 allows for overclocking, we might get GTX 1080 like performance out of it, since the former 1070TI could match 1080’s performance once overclocked, it doesn't come as a surprise we might just be able to do the same thing with the newer cards.
@@lucasvinzon8943 he literally disabled the rgb lol? the only time he had the rgb fans enabled was when he first booted it and it automatically had the rgb enabled
bro tf you talking about? The whole point of the build is to be a white and gold pc. There was one shot where he had RGB on, and that's when he first booted up the PC, so it was on automatically. He said in the description that he saw other non-RGB and gold pcs and wanted to make one himself. Also, RGB isn't supposed to be necessary, its for looks, not performance.
Check out the new Lian Li 011D XL build in a different color theme and special sponsored project.
ua-cam.com/video/F4hItG8mFmg/v-deo.html
How much cost it
nice build. but i want to know which fan size do you use for that back fan. is it 80mm or 70mm?
@@looney2be Tnanks. I cant beleive i still answer the questions about over one year old build. It's definetely 80mm fans. Try to get the PWM ones, the regular ones with 3 pin are quite loudy.:)
@@AKTechMods yeah i'm building inside the same case. And wondering if i can fit small fan behind. Do you drill extra hole or just using existing hole?
Thanks for responding.
@@looney2be It needs to be definetely drilled new holes. Make sure to measure the holes from inside while the case laying on it's back. Two side adhesive tape would help to hold the fans on its place. Good luck.
There are so many famous youtubers that call themselves "Professional" Custom Loop Builders but not a single one of them do the easiest, simplest and safest leak test. Air Pressure 8:49. Thumbs Up man. You are one of the few that actually show how its supposed to be done.
still no idea... so I presume if there were a leak the gauge would return to 0?
@@gamerdweebentertainment1616 If there is a big leak yes but if its a small leak it would not go all the way down / would go down very slowly. Any pressure reduction a leak sign
.
true.. all I've ever seen is people throwing loads of shop towels inside, and saying to pay attention to it in case there's a leak -_-
He cant even do proper airflow, not a single intake fan
@@BeatstormX ya he is pretty dumb
He used pressure gauge, brilliant way to check for leakage,, nice
I was wondering what he was doing. I'm new to building PC's so I've been watching videos and reading comments xD I hope one day I can build a beast like this
@@Shinochaos same dude
Shinochaos it’s not rocket science you just need to know what parts screw into the proper places... honestly just off of this video alone you can probably put 2 and 2 together to figure out how it’s built if you have all the right parts.
Shinochaos or find someone that knows what they’re doing and have them help you!
Anyone know what pressure gauge and pump he used?
report this video for containing pornographic content
Vivek Jindal yea.. please. How hasn’t youtube even spotted it...
where?
Yes it seductive.........
Keaton Reinson Are u dumb
@@izakyewsang-gonthier4898 fucking joke went over your dumbass head thats for sure oh wait,
wosh
How to call someone poor for 12 mins without saying a word.
I mean id rather be poor than stupid for spending this much on looks. As far as performance increaae its minimal at best. Even conventional air cooling is still sufficient enough for any gaming rig.
@@prototype8137 True. I respect the uploader's effort and he obviously has the budget for it but this feels too over the top for me. If I was to watercool I'd probably run the simplest loop possible but yeah performance gains aren't really worth it.
Nah we’re not poor it’s just that he’s rich af
@@prototype8137 TRUE
Nah you should see the Arabian Prince's CSGO inventory- $2+mil spent on a videogame he doesn't even play lmao.
My wallet: Don’t even think about it...
@insaane it's not needed though, i've ran a custom watercooling since 2-3 years now that cost me like 130$ total, looks amazing and works perfectly fine.
@@Gagliano17 I think he was talking about all the color coordination with all the parts and the parts themselves.
@@Gagliano17 This is like a $1500+
I think you meant to upload this to pornhub not UA-cam
True
Why??
I don't understand
This is a masterpiece.
Thumb screws on the PSU 10/10.
i was thinking the same thing, i love the thumb screws for everything. even more so for board placement.
and here I am still trying to figure out how to hide my SATA cables.
Jacob O'Dell 𝒘𝒉𝒂𝒕 𝒅𝒐 𝐲𝐨𝐮 𝒎𝒆𝒂𝒏 𝒋𝒖𝒔𝒕 *𝐄𝐀𝐓* 𝐭𝐡𝐞𝐦
he uses m2 disk
sata ? Just use nvme you can connect those drives right to the motherboard. And they are like 4-5 times faster than a sata ssd
Dual chamber case allows for some sweet cable management. Also m.2 eliminates cables
@@XhizorBE also gaddam more expensive
Im usually not a fan of Gold looking stuff, but this looks quite nice.
Ouch that hurts
One of the finest builds on youtube. You have really spent hours on this project. Waiting to see more creative builds from you.
Congratulations!!!
OMG You are one of the first I've ever seen use a pressure tester on the lines versus lets.cross fingers and run coolant thru it and hope for the best. Thumbs up just for that one alone
Can you explain me the reason why he has used a pressur tester and a bicycle pump?
@@Janoww It's a leak test... By pumping air in and monitoring the pressure, he can be sure there will be no leaks. Better than just throwing in the liquid and hoping for the best.
I’ve watched so many vids and never seen That before either
One question: after the test is complete does he take the pressure regulator out or leave it there?
@@K4R1N3L1M4 takes it out
Wow. Amazing work! I came across your channel while researching custom water loops. I've been building PCs for 20 years but never did a custom water loop. Completed my first one 2 months ago and now I'm hooked. Your builds have inspired me to do more. I've already ordered an Antec Torque for my next build and can't wait for all the parts to come in. I've never been one to spend money on the "art" side of computer building and preferred to put all of my funds towards higher end components, but the building part has become almost as much fun as actually using the computer for me. Keep up the great work. I hope to one day get into designing and fabbing my own custom water blocks and distribution reservoirs like you've done.
This is an incredible, & fantastic build. Your attention to detail is incredible. With everything matching. From the SSD, M.2, Fan Covers, & The GPU. I have never seen a Gold Dragon Graphics card. You sir have a new subscriber. Dan.. This is a work of art.
i only dont get it why ppl not using custom power cables for ssds, stock modular wire not look good, ssd needs only 5V + GND so you can do 2 wire cable which will cost about 6-7$ sleeved
@@duniek86 well why bother customize them when they dont show xd
@@beanboy9029 easeir to manage, also I always trying to do best cable managment even if its not visible
Except the thumbscrews... that are quite obviously orange.... Not gold
A golden beast! 🤯
Yes!
Best build I've seen, just superb combo of colours and nicely done... stunning and can't wait for Version 2!
Excellent work man. I knew right off the bat just looking at your fitting assortment... there was insane attention to detail in planning this build. Good work.
And then there is me that I don't even have a computer..
sick build..no words
Keep on man,you're growing!:)
never to late to start, i didnt know shit about PCs 1 year ago, but now i have my own hand built monster and i couldnt be more proud
BakkenDevil same here. Learned through hours of YT and finally built my own pc. theres nothing more satisfying then building your own monster pc.
And there is me who have a gt 635M from a 2011 old laptop and have to argue with my mom to get a new one x)
Why not just get yourself a new one, unless your hella young and still rely on your parents income?
@@SemperFiNightHawk Because i can't work i'm still too young :/
The most beautiful build i have seen so far. Stunning.
Plenty of travel in tubbing. Done in a very inteliggent way. Amazing build
Hang on there falks. The Golden Dragon V2 is coming up soon. Got meanwhile multiple ongoing project(s) and they are also on hold due to this pandemic disaster. By the way, stay strong and stay at home . Together we'll beat this too.
Hey do you do these on your own free time or are these pc’s built on commission?
@@jitterz0135 Both..
@@AKTechMods i am looking to do a black/gold build and am wondering if you painted out the ram/post screws? seem to have perfect color match. If so what paint did you use and where can i get those post screws at?
What thumbscrews did you use for the motherboard and graphics card bay?
@@wintejr i didn't actually paint myself. All the colors are original. I just did cherrypick the colors after a long search. Thumbscrews and fan covers are from aliexpress/Formulamod. The recent build which i am working on it (G-D v2 ) will have custom paints.
In simple words, this is a true masterpiece👌🏽. Never seen something that’s even close to this pc, you nailed it. Gj👍🏻
I was just about to ask if you entered this in the builds.gg challenge then I scrolled down and saw that you did you definitely have my vote. singularly one of the best looking pc builds I have ever seen built, amazing truly.
In the immortal words of Goldmember " I Love Gold!". Amazing build....
one of the beautiful rigs i ever have seen
I never thought tech vedio can be this fascinating. Edit and sound was top class. Its better to see this vedio than songs. Thanks for uplaoding this.
by far one of the cleanest builds ive ever seen, very nice!
beautiful build, but font choice is everything which makes that golden dragon text incredibly distracting!
I AGREE... better font choice would have been better overall gorgeous build
Yeah, that font is pretty ugly... a much more simple, less-stylized font would have been a much better choice in my opinion. But it’s not my computer! It’s his.
Many have been asking about the in&out-take fans setup. It's just for the show. Good that so many have been attracted with it;). Now wait for the next build with in&out-take fans. :D
Awesome build, looks incredible. My personal opinion the RGB fans detracts from your build maybe full white colour instead of flashing colours.will be voting for this however !!
@@driverside6331Thanks for the add. The build has now zero rgb.
Awesome build, super clean, very nicely done, voted
Looks great and all...but you got 1 Basic dead wrong AirFlow!! All fans are set up to grab air from center of case and push it out. However you got NO fans pulling air into the case.
At least, it sure seems to look that way.
@@esrtek5754 @Eric R It's just for the show. Good that so many have been attracted with it;). Now wait for the next build with in&out-take fans. :D
When I saw the title I thought Geil was re-releasing their Golden Dragon memory line, and you were using it. I owned a Golden Dragon pair of memory modules, they were gorgeous almost 20 years ago.
The fact that you listed the tubing and fittings is a 10/10 for me! Absolutely stunning build!
Trident Z Royal for the RAM over the ADATA would have truly been the icing on the cake, but this is otherwise a stunning build!
Already bought it. But, went with adata because of the g.skill's color missmatch.
@@AKTechMods what was miscoloreed ? Super interested ?
@@Insaiyanrider G.Skill has a bit lightgold color and adata has a bit darker/chromic gold color. Adata matches perfectly with bykski''s gold colored fittings, pomp-cover and cpublock.
@@AKTechMods
Hey rebuild this pc again but this time use the trident z royal gold and the msi godlike
Have to agree. I dont even eant to criticize this build though. Freaking stunning!!
Absolutely sickening awesome build! Color scheme on point, love gold! Great job!
is this like the koenigsegg of the pc world? looks amazing
I think it is
It’s the Pagani of PC builds...
Ayyyyyyy
ua-cam.com/video/zoTkwFi1gcg/v-deo.html
Anyone else going crazy over the fans being set to exhaust...? ALL OF THEM...
Pure aesthetics and makes zero difference in thermals. Plenty of space for air to enter through holes in the case. Also, looks like the 2 80 mils on the top back might be intake.
@@timmyboy04 That's exactly the problem. It allows dust to come in through unfiltered.
Absolutely Stunning !!!
Only two words:
True
Beauty
I need this computer so I can watch Netflix and Facebook
if i have this .. I will watch at it only not the screen 😂😂🤣
i hate u nothing personal
@@aigami93 that's good because I realized I can watch Netflix and Facebook on my phone. The only thing I'd need this computer for is to play solitaire
@@casketgrind yes solatire is the only thing this copmuter can run lol
I might customize the wallpaper. Don't wanna over heat all the motherboards
OMG *-* this is simply wonderful. Congratulations
Thanks. Appreciated.
10/10 would buy it for full price + labor 🔥🔥🔥
Been looking for a gold custom pc now and it seems you customized a lot of the parts
Beautiful video, love it 😍. This pc has so much detail in it... don’t forget that filming while building a machine like this, drastically lengthens the time. This makes it even more of an achievement! Thumbs up 👍🏽
Man this build is so damn nice I wish I had a job so I can get money to make one of these masterpieces
10+ months later and this is TOP TIER BUILD NO DOUBT. Artist, builder, and brilliant. I'll subscribe and look forward to some testing AFTER drooling overtime build- this would set you OUTSIDE AND ABOVE the illusory idea that after a build there's no testing done- why?; and it's frankly NO REASON ergo "illusory". HATS OFF TO YOU AK. Awesome build !!!
Legend has it that it can summon Shenron to grant you a wish without the need to collect all the dragon balls.
You are the only builder I have seen so far using pressure to check for leaks. Everyone else uses paper towels.
Most amazing build ive ever saw on youtube
I really want to know where those gold thumbscrews used on the motherboard came from. Or at least what threading that is so I can try and find something similar. Is it m3? 6/32?
He said in the first question response that he got them from aliexpress
@@Iluvtracilynnjewelry Thnks, didn't see it.
wicked build. But... that front reservoir would drive me nuts. The way the coolant is getting in-between the layers of acrylic where it shouldn't be would drive me nuts. Also the fallout from the opaque fluid is going to build up in there reallllly fast.
awesome attention to detail tho. I like the colour matched thumbscrews for mounting the mobo a lot.
Thanks for the nice comment. Appreciated.
Imagine that distro as a hourglass which sand is flowing down constantly. Sad that it can't turn upsidedown:D.
I’ve always wanted a PC that shares a name with my favorite takeout place.
Where'd you get the gold stand off screws? I'm looking to do a white / gold build myself over the course of the next year, and trying to track down gold accent stuff is going to be a pain in the ass, I can already feel it.
Wow, 11/10. Excellent build. Just the time and effort getting everything ready had to be monumental. gg m8 👍
I just love watching things that I can't afford
Theres no point to water cooling unless you have a multi-GPU setup.
Sick build looks great.. but sad you guys didn’t show the taking apart the cpu, graphics card, or how you connected the hoses for water cooling
agreed
Promise to do it next time. Thanks for the feedback anyways.
Ty for the reply you guys rock@@AKTechMods
@@AKTechMods I saw and clicked- GLAD I DID! This INHERENTLY shows you are both an incredible builder AND an artist. I'll subscribe after this 1 vid. Better in my opinion as ALL WONDER- a few tests after the satisfying minutes looking at angles of the completed build. Pressure gauge = contender HA! Hats off AK.
Love the build. Question: Did you paint the fans, fittings and motherboard in gold paint and if so what type of paint did you use
I never like the over-editing in these videos and the music, but a massive thumbs up from me for the build. Amazing!
10:08 Love how the gold accents on the top and bottom fans appear like they are levitating in mid air.
Damn, It looks like all the fans are exhausting. Where them intakes be?
Same question
The 3 golden fan at the side?
they exhaust, look at the blades closely.
Actually all of the Yellow fans are in-take. The transparent/cristal fans in the back (Which are barely noticible) are the exhaust fans to let the air out.
@@lBeyBlack LOL, look at the blades their all exhaust.
My jaw dropped when I saw this, it hit the video and brought me here
So old Margery hears the music coming from iPad and takes interest in the video.
She sees a bunch of parts being assembled and asks “what are you watching?”..
I calmly look at her and in a serious straight face manner reply.. “porn”. Then continue to watch the video.
She stands there for a few seconds, slowly turns, leaves the room and closes the door behind her.
#truestory 😂
Definitely a pro build. To be able to have things customized to this degree! What a beautiful build I couldn't even dream of making for myself.
That was a work of art. What I like about the dynamic/dynamic xl case is it let's you express yourself fully by giving you a blank canvas. I had the corsair 680x before but that case is more beautiful from the go but it can't be fitted with a loop like this. The dynamic is more beautiful when you install an awesome loop like this.
I'm wondering why he didn't use Trident Z royal gold.
Because it has RGB in it. RGB are disgusting.
And it's not just that. There's only golden on sides. You cannot see golden in the front which is why he preferred them instead royal gold.
Bradey Burton not if you use it correctly and don’t overuse it
@@bradeyburton5751 RGB doesn't mean "let's puke rainbow everywhere". Statically controlled, it can help promote the aesthetics of the build by adding to the primary or attention-drawing secondary colours. In this particular case, a nice white could add to the build to make the rest of the components "pop".
The gold tones don't match... actually there are different kinds of gold. The Trident one is whiter 😊
0 out of 10 not enough RGB
Nah just playing, this is the best build I’ve seen with this case. Props to you!
but seriously tho add rgb
9:51
My PC Case 😍❤
مستحيل حتى هنا موجود😂
تحياتي👍
Same
WOW, i'm impressed beyond words, this looks absolutely amazing. I'm just getting into water cooling (AIOs don't count) and i was also looking into the PC-O11DW and the Distro Plate and i stumbled upon your build and I'm just blown away. Wish i could do something like this with my build. BRAVO!
amazing build!
What are the golden screws u used to put back together
So if you want to give that away I’m your guy! Amazing, and I want it more than anything! Great build!
I sure hope that chip OCs well being with being delidded.
My pc is crying in shame right now. Amazing build!
I've seen a lot of watercooling builds but something about this one is just so much better than all the builds on youtube. was looking for parts today and saw a cpu block I liked that reminded me of this build. turns out it was the same one. I really want to recreate something like this, it's absolutely stunning. props.
I think this has to be the most satisfying built on youtube tbh .. i like the milk looking liquid ! OP
Welcome to another episode of ' Oh! I can't afford this'.😊😊😊
Beleive me you can.:)
Bro, this vid is the sexiest pc i've ever seen man! good job! I was wondering how much this set you back? I want to build this but I dont have money for custom cooling and a 2080 TI, are there any other substitutes?
AMD is always good performance but I’m not exactly sure if it comes with water cooling capability but if it does, I would get a 5700 XT III
Soo freaking beautiful... kinda Godlike aestethics. Great build!
Creative, I don’t think anyone’s ever thought of cooking their pc with milk before, well done
My Brain: YES! YOU CAN ! My Hands: NO! YOU CAN'T!
Man's poured milk into his CPU 😂
Nah that’s not milk its something else
@@skiez7430 its daddys cummies
Can it run coolmathgames ?
Your asking for his PC to explode!
iLlumurk not cool man cool math tooooo much
Will it run Minesweeper at 4K 100FPS on a 32" OLED monitor with 144MHz refresh rate?
@@በተሰበ Hz*
@@beanboy9029 r/whoosh
Put in an art gallery or museum, it deserves to be looked at and admired.
This is a one of a kind amazing project. I got to show my friends.... just impressive. Pure. Powerful. Beautiful.
Did he put milk in water cooling system
N0om_yt i also wonder
Wow very nice but I'm betting to own one I will need a 2nd mortgage on my house. 😂😂
why all of your fans are set to exhaust ?
Probably because of the fans being gold only on one side.
negative air pressure..
OMG, i'm glad someone else caught that. It literally doesn't have a single air intake fan. Also, air can really only enter the case by the graphics card where the vent holes are, maybe a bit through the top on the far right and same with the bottom (though because of the rad on the bottom, would just end up sucking in warm air).
thanks god im not alone
Also noticed it
He probably did it cause it look ugly on the other side, but it need fresh air...
Most elaborate build on UA-cam... Bravo...
Best build I’ve ever seen! It’s almost majestic
Plot twist: Your motherboard stops working.
Kill Switch Off oof
Next on Linus tech tips: Liquid cooling with MILK?!?!
i can't say No to UA-cam recommendations 'sigh'
I've just come across this video and I have to say, your work is brilliant. However I'm concerned about the fan configurations. They are all set to exhaust. I can't see the intake fans, correct me if I'm wrong.
please don't flame me , im still learning. are the vertical triple fans intake? and the dual top and bottom fans pushing air through the rads? It looks like they all are exhaust so im confused
Objectively beautiful, yet light colors is not my theme.
You should used Liquid gold. Cardi b would take it xd
Eeeeeeeee! Custom liquid cooling PC... from milk... -_-
Based on benchmarks and actual gameplay footage, the RTX 2060 is indeed better than a GTX 1070. The name itself is pretty confusing as people might think that the 2060 is a graphics card that replaces the GTX 1060, as a mid range card.
The RTX 2060 is an upgrade in the sense that it is way better than a GTX 1060 as it is capable of playing games at 1440p comfortably, which automatically puts it somewhere in the “high end” gaming segment.
Which of the GTX 10 series cards were mostly aimed and meant for Full HD+ gaming ? The 1070 and the 1070Ti.
On paper, the RTX 2060 has just as many CUDA cores as the GTX 1070, while the 1070TI is way ahead, in terms of CUDA cores, at least. Still, the number of cores a graphics card has proves nothing on its own if we don't pay attention to the rest of the spec sheet, which is exactly why the RTX 2060 comes ahead of its two older gen counterparts in pretty much all benchmarks and games.
The RTX 2060 is at least comparable, if not faster than the GTX 1070 TI which is still a high end card, hence the former's pricing at around 350$. Similar performance, similar pricing.
If the RTX 2060 allows for overclocking, we might get GTX 1080 like performance out of it, since the former 1070TI could match 1080’s performance once overclocked, it doesn't come as a surprise we might just be able to do the same thing with the newer cards.
So that this little RIG can become great and powerful >_
Sick Build. Nice work
Bro u dont even need any RGB , Its fking perfect !🔥❤️
how to build a pc by everyone other than the verge.
the verge video was a hilarious shit show!
@@SemperFiNightHawk and the way they tried to cover it up and blame the critism on racism was hilarious
RGBs completely unnecessary.
Blue rgb makes your pc more cold 😄😄😄
Seriously, at least make it white. Completely ruined the entire aesthetics of it.
@@lucasvinzon8943 he literally disabled the rgb lol? the only time he had the rgb fans enabled was when he first booted it and it automatically had the rgb enabled
bro tf you talking about? The whole point of the build is to be a white and gold pc. There was one shot where he had RGB on, and that's when he first booted up the PC, so it was on automatically. He said in the description that he saw other non-RGB and gold pcs and wanted to make one himself. Also, RGB isn't supposed to be necessary, its for looks, not performance.
Lovely build, but all the fans exhaust?
Nice green and black coloured setup 👍👍👍😊😊😊