⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
For those talking about reprogramming, I'll share what I know. For cars built after about 2000 you likely won't be able to simply get an ECU from another car of same make, model and serial number, and put it in your car. Reason being is ECUs in newer cars are coded for that specific car, so you'll have to have the ECU reprogrammed to your car and this has to be done by a dealer or ECU repairer. The reprogramming is mostly or only because the immobiliser coding is specific to that specific car. If you can find a 2nd hand ECU, and ETACS module and Key Reader and Key all from the exact same car, then you should be able to put all those parts in your car and not need any reprogramming. If you're sourcing a brand new ECU then again that will have to be programmed for your vehicle.
Watched your video to see if the replacement ECU needs to be re configured after install? Please advise if used replacement ECU, from the same car, needs to re programmed by the dealer? Thank you
Don't need a mechanic, could do it yourself with a laptop/desktop with techline connect software and vcxnano dongle and 45 dollar license to uour5 vin number. But sometimes programming is unsuccessful
I have a Chevrolet cruze 2011 and its cant drive its shake really bad when I turn it on I scanned the car and I get a code u0100 can someone please help
Where all do these cables from the ecu connect? I just had my car towed back home. No start. No clicking. Battery tested good. All lights throughout. Dark outside right now and no garage. My jack is shit. I see some big clip hanging by the exhaust at the back of the motor. What's that go to?
@@taipan8021 there's a device from the dealership attached to the starter. Starter/gps disable relay. Can unmounted somehow, and the white wire got fried by my exhaust. I just spliced in a new wire. All is good now.
i wanna ask you a bout sonic ls am change steering wheel with cruze control but unfortunately its not working just a light any idea to get work please ??
My 2012 cruze with engine off it drains battery an the relay 13 in fuse box won't stop clicking. I have to take battery terminal off every time I'm not driving it. Anyone kno this problem
Hello mate, I have a chevrolet cruze with some errors. U0140 and in BCM b101e the immo light is off but the car don´t crank. Can you help me ? Can you share you contact ? Thanks
I just went to my local junk yard and got a computer out of a tune Cruze my question is can I just put this computer into my cruise and will it be too or does it need a reflash or what info do you have
Corey Price I’m having problem with my car stalling on me while I’m driving and the engine shaking. Also lack of power. Did you had any of that problem? Thanks for responding
Sometimes they just go bad and if the modules cant communicate with with each other and read whats happening in real time from the computer then they dont work and you can loose power steering or ABS a whole lot can happen
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Hi I'm having some problems with my Chevy sonic
Do you have to do additional configuration to the ECU after replacing?
For those talking about reprogramming, I'll share what I know.
For cars built after about 2000 you likely won't be able to simply get an ECU from another car of same make, model and serial number, and put it in your car. Reason being is ECUs in newer cars are coded for that specific car, so you'll have to have the ECU reprogrammed to your car and this has to be done by a dealer or ECU repairer. The reprogramming is mostly or only because the immobiliser coding is specific to that specific car. If you can find a 2nd hand ECU, and ETACS module and Key Reader and Key all from the exact same car, then you should be able to put all those parts in your car and not need any reprogramming. If you're sourcing a brand new ECU then again that will have to be programmed for your vehicle.
Mine just went-mechanic just explained verbatim what you said to me in the phone..doesn’t sound like a cheap job uhg
@@niagra898how much was the programing? I just took my ecu to get swapped
How do i program ecm after replaced used ecm . Cruze 2012
4:09-4:12 You're welcome.
Ha Gottem
You got me
You bastard
Should be good to know why are you replacing the part also....but good Chanel good videos very useful for me ...keep going God Bless u boss
You are the BEST !!!!!
Watched your video to see if the replacement ECU needs to be re configured after install?
Please advise if used replacement ECU, from the same car, needs to re programmed by the dealer? Thank you
hey man, I’m experiencing the same problem. did you figure it out?
Is it the same ecu with sonic 1.6 L Gasoline(or petrol) 2012
Watched your video to see if the replacement ECU needs to be re configured after install?
Please advise? Thank you
Same question. Should have an answer???
@David Wheeler Got an answer. ECU must be reprogrammed by a dealer & is very expensive.
where can I find the video for programming the ECU?
It has to be programmed by a dealer or a mechanic that has a programmer. To avoid this you should've bought an ECU that comes pre programmed.
Don't need a mechanic, could do it yourself with a laptop/desktop with techline connect software and vcxnano dongle and 45 dollar license to uour5 vin number. But sometimes programming is unsuccessful
Do you have link to programming of ecu once replaced In sonic 2012? TIA
Good day
Please share the link for the programming of the Cruze / Sonic ECU. I have searched both your channels and was unable to locate such a video.
I’ve also looked for this without any success. If you could include that in the description it would be helpful. Thanks for the videos! 👍👍👍
Thanks
I have a Chevrolet cruze 2011 and its cant drive its shake really bad when I turn it on I scanned the car and I get a code u0100 can someone please help
I am dealing with this rn, did you ever figure it out?
Where all do these cables from the ecu connect? I just had my car towed back home. No start. No clicking. Battery tested good. All lights throughout. Dark outside right now and no garage. My jack is shit. I see some big clip hanging by the exhaust at the back of the motor. What's that go to?
Some to engine the rest in to steering wheel, doors fuel pump,etc
@@taipan8021 there's a device from the dealership attached to the starter. Starter/gps disable relay. Can unmounted somehow, and the white wire got fried by my exhaust. I just spliced in a new wire. All is good now.
2011 camaro 3.6 womt start shop thinks it's ecu can I just buy a plug and play ecu online to fix issue
Did my faulty PCM just fry my car battery ( battery was smoking) ?
How can I program it ?
i wanna ask you a bout sonic ls
am change steering wheel with cruze control but unfortunately its not working just a light any idea to get work please ??
For chev cruze 2009
Any different between 1,6/1,8
Computer box
Can I program a used ecm for a 2011 chevy cruze
Nice vid as usual but why replace......
How go you program it
How do I replace the connectors to the computer?
Seems like the Chevy Cruze is a Money pit
Why would I replace my ECU?
My 2012 cruze with engine off it drains battery an the relay 13 in fuse box won't stop clicking. I have to take battery terminal off every time I'm not driving it. Anyone kno this problem
Hello mate,
I have a chevrolet cruze with some errors.
U0140 and in BCM b101e
the immo light is off but the car don´t crank.
Can you help me ?
Can you share you contact ?
Thanks
Question what if the wires are loose from the head
Does this disable the anti theft torrent system
I just went to my local junk yard and got a computer out of a tune Cruze my question is can I just put this computer into my cruise and will it be too or does it need a reflash or what info do you have
Did you figure it out?
@@Ak56rm1sj yeah I had to order a new one that came pre programmed and flash it to my car
Corey Price I’m having problem with my car stalling on me while I’m driving and the engine shaking. Also lack of power. Did you had any of that problem? Thanks for responding
@@Ak56rm1sj have you checked ur spark plugs and coil pack I'd start there also is it throwing any codes if so which codes and is there any smoke
Corey Price I put in new spark plugs and new catalytic converters but still giving me p0420 and it keeps randomly stalling.
Hi
Why should a car ECU be replaced?!
Sometimes they just go bad and if the modules cant communicate with with each other and read whats happening in real time from the computer then they dont work and you can loose power steering or ABS a whole lot can happen
GRAZIE
Hy chervolet have opel ecotec engine. ?
Where the ecu programing video?
4:10 " ha.. gotem"
Chevrolet Cruz code 84 help
IS THAT A NEW ECU YOU REPLACE
Y de un sonic?
Hi guys
3 years still waiting on that programming video. This dudes channel is so sketchy.
thanks alot for the info. could you give me your email, i wanna send you a picture of a part that i want to replace.
What's with the racing suit. You just come from a race