Looks like this Foxsur charger has a similar repair function to a Noco Genius 5 or 10, or CTEK battery chargers that use 16 volt pulses to desulfate a battery.
Normally pulse repair mode how much time needed battery is full? 60ah battery
Pulse repair normally depend on battery condition.Can’t advise on that,Sorry 🙏🏼
Hi bro..what type of battery mode should i select...for this yokohama MF 😊
Depend on battery condition,Pulse Repair Mode : if Battery status below 10V just push the repair button , it will repair till auto stop . ( 5- 24 hours )
At what Amp should I stop charging at? It's gone from 3.1 up to 5.8..
@TonaziTube NEWBIE.....So iv just realised it's the VOLTAGE I was suppose to be following...
Now it says FULL
This device is LEGIT
Hello
12v 60ah 510A battery I need recharge
Which mode is better?
Normal mode or pulse repair mode?
Which is correct
If battery still in good condition (not totally dead),pls select normal first.
Ok
One more question
If I select pulse repair mode, how to identify battery is full?
If display labelled or not?
FUL will appear at display.If battery worst case,it will not display....
Okay
Normally pulse repair mode how much time needed battery is full? 60ah battery
Kya 40amp. Battery charge hoga
@animeshsingh2146 yadi baitaree kee reting 40 empeeyar ghante hai, to 5 empeeyar ka chaarjar upayukt hai. adhikaansh aiv baitariyon kee reting 50 amp ghante se 70 amp ghante ke beech hotee hai, isalie aap 4 se 7.5 amp vaale chaarjar ka upayog karana chaahenge.
@animeshsingh2146 If the battery has 40 amp hours of rating, a 5 amp charger is suitable. Most EV batteries have between 50 amp hours to 70 amp hours of rating, so you'll want to use a charger with 4 to 7.5 amp.
thanks for sharing
Welcome