Awesome Dean, Thank you for taking the time to explain how you set up your inputs and outputs for the tool changer, that helped clarify how it all works including the sequence and tool changer steps. Once again, Thank you. Cheers
Hi dean, great videos. I'm very interested in these szgh controls, how much did the controller and the servos/drives etc. set you back? i'm guessing 10k+?
Hello Dean, I would appreciate if you can share with me your machine's current backup, It seems I'm not able to make the tool function work with the given ladder. is it possible hence i have the same controller SZGH MDCB1000
When i turn on controller and then I connect io board, it works normaly... But when board is connect, and then I turn controller... Only on screen is szgh picture.. Reset, enter... Dont work
My machine is VMC15XT and the size is clase to that of the video. Do you have the size for the motors and spindle? I don't know if your electricity source is 220V three phase 60hz
@@173roberto Servo motors are 1.8kw and spindle motor 7.5kw 10,000 rpm. I have both 240v 50hz single phase and 420v 3 phase. They will work with either, I have run them on both. The fadal uses 240v 50hz the Hurco which uses 2.2kw motors and 10kw motor we run on 3 phase.
Awesome Dean, Thank you for taking the time to explain how you set up your inputs and outputs for the tool changer, that helped clarify how it all works including the sequence and tool changer steps. Once again, Thank you.
Cheers
Your welcome Ryan.
nice , i have gsk for my lathe, i check for alternative, i will probably retrofit my mill
These systems dont have a closed loop.
Never forget this.
If it’s absolute and not incremental then it is full closed loop
And what control the magazine motor?what king of motor is?
Thanks for your sharing about SZGH CNC
Thank you for all your help James.
Hi dean, great videos. I'm very interested in these szgh controls, how much did the controller and the servos/drives etc. set you back?
i'm guessing 10k+?
ordered the same from szgh for $2500 to uk without spindle motor
Hello greetings. Can you tell me which machine code to use for tool change?
This controller can spindle probing? I have one but cant find probe macros
Hello Dean, I would appreciate if you can share with me your machine's current backup, It seems I'm not able to make the tool function work with the given ladder.
is it possible hence i have the same controller SZGH MDCB1000
Hello, how did you set the floating zero point , (homing )?
It's just a parameter setting, can't remember which one but will take a look and maybe do a short video.
which post process does this controller use?
Please, help how change settings for Z axis, i have 5mm pitch ball screw,...
if still you did not get solution, please contact me
Hi.. I want ask you.. I have cnc1000Mdc and when i connect cable CN3 to I/O board, controller dont turn on... Have you any theese problems? Thanks
@@libormatak5501 had no issues like that, check the cable with a meter you may have shorted connections.?
No i have not shorted connections
When i turn on controller and then I connect io board, it works normaly... But when board is connect, and then I turn controller... Only on screen is szgh picture.. Reset, enter... Dont work
I want to retrofit my Fadal with that control. Do you recommend it?
Yes I do. We run a Hurco BMC40M on a daily basis for last 2yrs with same control and not have any issues.
My machine is VMC15XT and the size is clase to that of the video. Do you have the size for the motors and spindle? I don't know if your electricity source is 220V three phase 60hz
@@173roberto Servo motors are 1.8kw and spindle motor 7.5kw 10,000 rpm.
I have both 240v 50hz single phase and 420v 3 phase.
They will work with either, I have run them on both. The fadal uses 240v 50hz the Hurco which uses 2.2kw motors and 10kw motor we run on 3 phase.
Really appreciate you making this video!
Your welcome, any questions just ask.
is this a HIGH-SPEED HIGH-PRECISION CONTROLLER?
szgh 1000mdb
Define HIGH-SPEED HIGH-PRECISION.? However if you Contact SZGH they will supply you with all the specifications.
Good day, can you share a copy of this manual thank you
can you make tutorial video how to spindle orientation(homing spindle) for atc szgh(newker) controller. i have try for 2 weeks....... :(
What spindle drive do you have and does the spindle have an encoder.? Won't work if doesn't have the encoder.
@@hemsworthlad can I get a copy of your backup file, as my controller won’t tool change and the engineer won’t reply