The Arduino Simulator you’ve been looking for!
Вставка
- Опубліковано 12 лип 2024
- 🤩 FREE Arduino Crash Course 👇👇
bit.ly/get_Arduino_skills
Want to learn more? Check out our courses!
bit.ly/33ceYv4
We designed this circuit board for beginners!
Kit-On-A-Shield: amzn.to/3lfWClU
SHOP OUR FAVORITE STUFF! (affiliate links)
---------------------------------------------------
Get your Free Trial of Altium PCB design Software
www.altium.com/yt/programming...
We use Rev Captions for our subtitles
bit.ly/39trLeB
Arduino UNO R3:
Amazon: amzn.to/37eP4ra
Newegg: bit.ly/3fahas8
Budget Arduino Kits:
Amazon:amzn.to/3C0VqsH
Newegg:bit.ly/3j4tISX
Multimeter Options:
Amazon: amzn.to/3rRo3E0
Newegg: bit.ly/3rJoekA
Helping Hands:
Amazon: amzn.to/3C8IYXZ
Newegg: bit.ly/3fb03X1
Soldering Stations:
Amazon: amzn.to/2VawmP4
Newegg: bit.ly/3BZ6oio
AFFILIATES & REFERRALS
---------------------------------------------------
►Audible Plus Free trial: amzn.to/3j5IGrV
►Join Honey- Save Money bit.ly/3xmj7rH
►Download Glasswire for Free:bit.ly/3iv1fql
FOLLOW US ELSEWHERE
---------------------------------------------------
Facebook: / programmingelectronics...
Twitter: / progelecacademy
Website: www.programmingelectronics.com/
Are you on the lookout for a good Arduino simulator? Wondering what an Arduino simulator is? We've gotten a lot of questions about Arduino simulators, and if a good simulator exists, so keep watching to find out more!
**Get the code, transcript, challenges, etc for this lesson on our website**
bit.ly/2YvHead
**About Us:**
This Arduino tutorial was created by Programming Electronics Academy. We are an education company who seek to help people learn about electronics and programming through the ubiquitous Arduino development board.
**We have no affiliation whatsoever with Arduino LLC, other than we think they are cool.**
****If you like this, I think you'll like the premium Arduino training we offer. You can check it out here**** bit.ly/3lHyzcB
I'll use it to learn more easily. I'm an old guy, and the tiny pieces are hard to hold and get in the right place, so doing it with a mouse will make it much easier to learn and do!
I used to teach the BASIC STAMP along with the BOEBOT in college, but that was 2000 - 2013. I began learning C++ programming, but fell out of it due to an extensive hospital stay.
I am currently going through the ARDUINO lessons included in the parts kit. This will make it much easier to learn and possibly a bit more fun as I don't have to pull everything out to work.
Thank you very much for this!
ET1 (SW)MTS (USN Retired)
Wow, this changes everything!!! now i can save up for a full kit and start learning on the simulator first! Thank you so much!
Played with this thing all day. Found it very informative and addictive. I played with the only one Optocoupler circuit that was listed. I wish we could contribute new parts to it.
I just found this video. The main purpose why I need a simulator is to test code modifications without upload to the physical board 1000 times. I hope it will meet my expectations.
Great video. I had no idea there was a simulator available (especially for free) for the Arduino. Thanks, Dave
Thanks! We plan on having some more videos highlighting different features of this simulator as well.
@@programmingelectronics thank you!
This video actually helped me, for my project simulation. Thanks man
Thanks sir 😁 currently as a student it was hard for me to buy these components. Thanks for sharing simulator
Glad it helped!
This is an amazing channel when it comes to content and clarity of presentation! It is my NEW FAVORITE CHANNEL!!
Thank you!
Thanks for kind note, and thanks for watching!
Thanks so much for this! So nice to be able to do Arduino stuff outside of the workshop.
Thank you for checking it out Ron! I agree, being able to mess around wherever is nice.
This is fantastic - thank you for making this!
Amazing, just amazing - I wish I would have known earlier, but still I am grateful for this hint!
Thanks a ton for sharing such useful information... Highly appreciated.
You're welcome - thanks for watching!
When I was just starting out I used the tinkercad code block for programming. From there I was able to tweak it and make it work for my needs.
Very cool! The code blocks are neat.
Awesome video. Short and to the point. You show a good overview of what Tinkercad can do. You have convinced me to try it. Thanks
Glad it was helpful David!
Well done mate! I like how people share ideas like this over tinker cad.
Thanks Patrick!
This is exactly what I'm looking for, this will make my physical circuit build much easier. Thank you a lot for sharing!
Hello! Really nice video! Thank you! I noticed that when the simulation runs, the usb is connected to Arduino. When it stops, the usb is disconnected from the board. Much easier to visualize when the simulation is running. Thanks!
I seriously did not know we could do all this outside of a lab
Thanks man
For someone who can't afford the hardware
I AM VERY THANKFUL FOR THIS!
Glad you liked it! Thanks for watching.
Cant afford hardware? Order arduinos from AliExpress for a single dollar (pro mini) or 3 (nano) or 5 (uno 3 leo). Affordability is what makes arduino SO great!
@@GyroGearlooseHelis the shipping expenses are outrageous. the cheapest we can buy here are about 5 bucks and no Leo or nano. And that doesn't even include the shipping fee.
I'd rather buy a data package for 1 dollar to run tinkercad and the rest of my money for me and my moms' food and other expenses.
@@GyroGearlooseHelis if the price of shipping lowers down by some percentage; I think I have a shot at buying some
@@pobrengit2642 dunno where you're shipping to, but it's free SH most places. AE just started charging a bogus "tax" they'll never send in to USA but still cheap goods
Wow it's really awesome to work with it thanks for this information.
You're very welcome! Thanks for watching.
very cool video, I use Tinkercad already for 3d printing design so nice not to have an extra tool to learn! thanks for taking the time!
Glad you found the video helpful! I would like to try it for 3D printing sometime as well.
My Mind officially blown! 🤯
This is hot stuff! Thanks!
Glad you like it!
@@programmingelectronics - Just finished my tinkercad drawing but it doesn't have fastled library or the ky-037 sound sensor module. Oh well on to the next simulator.
A nice start, but I would like to see it handle all the flavors of Arduino, not just UNO3 and ATTINY. But, you have to start some
wheres.
That is really cool. Thanks guys!
thanks bro. This helped me lot.
🥺🥺🥺 OMG!!! I didn't know there's a simulator for Arduino 🙆♀️🙆♀️thank you so much for the video!! I'm definitely going to download it and learn a lot from your videos so that I can complete my project
thank's bro,I need this for preparing to exam next week and I am broke I didn't have Arduino hardware,this is helpfully
Good luck!
That was really helpful, Thanks
Glad it helped!
This was very helpful, thank you sm!!❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺🥺😊😊😊😊😊😊😊😊😊😊😊😊☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️🛐🛐🛐🛐🛐🛐🛐🛐
Glad it was helpful!
Oh my, this will save my online classes! Thanks!
Happy to help - thanks for watching!
Thanks for this information! I'll be checking this out, since acquiring an arduino and every bit of hardware needed to tinker a bit and learn the basics is very expensive right now in my country and so, to order a component you must be almost 100% sure you can capitalize your build and be already sure about what you'll make and whatnot, which defeats the purpose to those of us who just want to learn a new skill and tinker a bit. I had no idea such a thing existed -I was already resigned to the fact Arduino was just unattainable for me-. I'll be trying it right now! And perhaps some day I can physically build my designs. Thanks!
Glad it was helpful!
Hooked... thanks for the info.. didn't know its this easy. Seriously thanks bud.
So glad it helped! Thanks for watching.
tnku bro for this wonderful information
You're very welcome, I hope it has helped.
veldig bra video jeg fikk fra lærern, trykkte litt feil men det var nokk på min side tusen takk:)
This looks brill. Thanks for the vid 👍
Thanks so much for watching!
Great tutorial on Tinkercad. This should get me off to a great start learning and test ideas. Thanks very much Dave.
Hey, an update for Arduino Simulators: (also free) Wokwi. ThinkerCad didn't had the OLED display that I physically have. There are no docs how to create one component with ThinkerCad. Nor import external library. Woki was pretty easy to use. Click + and add the component (several and you can create your own), wire it up, code, play. Also, has Serial output. I've read few docs about how to create devices I2C, and teak the code from uint_8 to uint_32 just for fun learning.
I cant wait for this to come out as an application for pc and my phone that i dont need online for, but still great nonethelesss
That would be cool!
Got me thinking how this works. If its client side processing or needs to call the server. Client side could be ported as a web app that can be basically downloaded and run from any device that can process web code.
Thanks for sharing this. I've been wanting a simulator for Arduino for a long time!
Absolutely Bob! Thanks for watching.
Nice sailboat by the way.
Too bad it's only on line. A downloadable version would be better. The library are missing components I use a lot, too. e.g. 16x4 LCD display.
This is cool
Thanks :)
I think you make good points for point 2 and 3 - not sure I agree with point 1 - but each there own I suppose.
Very fair - thanks for watching LeRoy.
Thanks for sharing
thanks a ton for an amazing video..
i wanted to know where there are any other platforms like tinker cad where we can use arduino mega board as well?Thanks again
Excellent presentation.
Thanks for watching!
Thanks for the great video
For a simple routine check or a test circuit i often use simulators, but for real projects i'm still relying on my breadboard mostly because the simulator is struggling with custom libraries
This one looks very nice, i'll give it a try
Thanks a ton for watching!
Wow, this is a Great tutorial. I have liked and subscribed :)
I have a question, | did the basic hello world blink led and I changed the resistor to 1ohm to see what would happen.
A small icon appears but just flashes on briefly not giving me time to read it, any suggestions please ?
Thank you very much - John :)
Hi there you done fantastic job, one request please describe how enter or attachment of library of specific component, thanks again 😇
Thanks for the request! I'll see if we can address that!
That's was brilliant I'll definitely be using that.. did you design that software????
Great, I'm glad you found it helpful Keith.
I had no hand in designing the software, I just wanted to demo it, because I know people are looking for things like this.
Well i like this simulator but there are nearly no ic's or did i just overseen them?
You're spot on - that is definitely one of it's limits.
thanks a lot for this website
You're very welcome - thanks a ton for watching.
thank you very very much for this video
Thanks for watching!
Thanks for making this video! I'm getting deeper into arduino and this helps allot! Either I missed it, and I've looked allot, or I'm not getting it yet, but how do you "save as" a circuit that you either build from scratch or one that they have and you have modified? Thanks!
That is kind of a tricky one! Great question.
When you are looking at the designs from the dashboard (the different designs are laid out like icons), they have a gear in the corner of each design that gives you a drop down. One of the options is duplicate, which I think is as close to "save as" that they have right now.
Hope that helps some!
@@programmingelectronics
Hi, Thanks for answering! You've put me on the right track. I've learned through experimenting that the "system" appears to save your project automatically.
I tried making a simple circuit, simulated it and then closed the program. Upon restarting the program, and going into 'circuits' on the left side of the page, it brought up what I just made. Mousing over each project shown, is when that gear shows up. In that drop down list, there is the 'properties' selection. This is where you can rename it as well as edit other stuff about it. Cool! I'm probably telling you something you already know, but this is how I found that it works.
Kind of a round about way of doing it, but it works fine!
I guess I'm too used to creating circuits in windows based programs and expected the same method in this one.
I see a small amount of IC's available. Is there a way to add more to the selection of our choosing or are we limited to this amount?
So now on to creating!
Thanks again for your quick response, it is very much appreciated!
Cheers!
@@cinibar I don't think there is currently anyway to add components like ICs, this is one of the limits of the system right now. Not sure of that will change or not.
Thanks again for watching!
Also free and also very good is SimulIDE. It works as a simulator for Arduino as well as Atmel microcontrollers. Perhaps for a future video you might consider comparing TinkerCad and SimulIDE ?
I think that sounds like a great idea - Thanks for the recommendation Eddie!
@@programmingelectronics excellent, I look forward to it, so it goes without saying that I'm going to click subscribe.
great video, thanks
Thanks a ton!
Thank you Sir!
Wow! I use TinkerCAD for some basic 3D modeling, but I had no idea they did Arduino simulations! Thanks so much!
Hey John - I thought the exact same thing too; in fact, I interviewed a guy at TinkerCad for our podcast some time ago, and I had no idea they did the circuits part until he told me, and I was blown away. The IDE you use with TinkerCad is pretty similar to the Arduino, with the bonus of having a debugger built in.
Wow , C++ without the migraine . Thank you for the lessons
Thanks Steve!
Really cool! I wish they had the mega and nano..
Thanks for watching Justin! I agree - that would be awesome.
Arudino nano is available
There could be a bit more enthousiasme in your voice but then, the information was so bang on that, well, who cares about enthousiasme.... Good pres man!
Thanks for watching Dominique! We will work on some pep in the voice!
Can this be used to run stepper motor circuit? Does it have drivers and stepper motors in library?
can't find any stepper motor... :-(
Thanks even if the video is quite long for not so much information. The most important missing things (for my point of view): is there a way to debug the code? I mean put break points, run step by step, seeing the register/memory values, etc. I know that Atmel Studio do it, but it's quite complicated as it's for the chip itself, not for Arduino boards.
There is a debugger for stepping through code, though I am not sure how full featured it is.
I saw that one of the projects had some 74HC595 chips in it. (9.23) How big is the library of components regarding chips etc..
Great question Bill! We cover that a little bit in a follow on video here:
ua-cam.com/video/Pzk3kURnDa0/v-deo.html
legend... thank you
The simulator you want is Proteus 8 ... Now mine is crashing like hell, but when it doesnt, its awesome.
Thank you sir. I was searching for one simulator like this. Bt would suggest me a good free ofline simulator for all microcontrollers for windows platform.
in twinkercad I cant find the right resistor like you had at 1:25 that's the one I need but I cant find it
Thanks very much didnt know there was a simulator for arduino
Glad to help!
Love this.
Thanks so much - glad you like it!
@@programmingelectronics ehh
Please forgive me if this has already been already answered is there any way to download other sensors like a 3 pin IR obstacle avoidance modules. This would work great and save a lot of time if they have these for download. 😁
Hey Lenny - I don't think it has that ability yet - so it is definitely one of the limits of the platform at this point.
If they add esp32/8266 and stm32 that might actually be useful :)
Nice introduction to Tinkercad. Could you explain how to simulate outside conditions like light on light sensor or distance on distance sensor? Because I didn't see some simulator that is able to do that yet.
Thanks for the recommendation Krovak!
In many instances, the easiest way to simulate missing items is to simulate them with their electrical equivalents. The equivalent to a photocell (LDR) would be to substitute a potentiometer as that is electrically equivalent. That isn’t always possible with more sophisticated sensors or modules, but it does significantly expand your options to simulate missing components since many are either on/off, serial data, or analog signals.
Excellent 👍👍👍👍👍
Thanks for watching!
How to get the components which are not in tinker cad? Like gsm module. I'm working on a project that i have to present just the simulation and code but some of the components aren't available on tinker cad. Any solutions around?
Hi! can we use a lora module with this simulator? i'm looking for a lorawan simulator
Does it have GPS coding functionality? how about Gyro ? and servors ?
You need to offer more components like blue tooth, finger print scanner, number pad, speakers, lora
Wonderful
I really appreciate the note Chetas!
These guys never make a mistake. The Blink example worked first time. The gallery is full of working examples. What I'd really like to see is that Blink example where the presenter "forgets" to wire in the resistor. Or puts the LED in backwards. What does the simulator do then?? Is this truly a simulator - a design tool - or is it just an illustration tool?
The best, you can create classrooms and students and teacher accounts. And text code and block code. And export it to ARDUINO IDE. But I would prefer Tinkercad will soon connect directly to ARDUINO and integrate more shields.
And you can setup projects fir students to mixe or reply. And have courses about ARDUINO and even integrate ARDUINO to 3D print projects (not simulator yet).
Great points Santos!
Be really good if they added Arduino shields :)
Agreed! Thanks for checking out the video!
It might ve a stupid question if I missed some info, but how did you select the 220 ohm resistor if you didn't have any data for the led itself?
Great question! I think if you click the resistor image, it brings up a window to adjust the resistance.
@@programmingelectronics that one I spoted, I was actually wondering why you set it as a 220 ohm resistor? I did not notice there is any power supply or LED data, and the resistance should depend on source voltage, LED voltage drop and LED current. Can you see the correct data for components in tinkerpad, or do you just set the resistance to real world needs and the simulation just works whatever you put in?
Great question @@filips989! I see what you mean now. You're right, 220Ohm is kind of a sloppy resistance value but usually seems to do the job. I think the sim will adjust accordingly for different component values.
Sir make vedio on voice recognition with resberry pi3 please
does the simulator have esp8266(node mcu) board???
is this the same thing like C++? can arduino be used at robotic programing?
Very much so, the Arduino can be programmed in C++
Awesome
Seems like a nice way to “try before you buy” a particular kit.
It's a great way to get your feet wet with about 0 commitment. Though, I must admit, watching the actual hardware do it's thing is far more enjoyable.
Programming Electronics Academy yes, exactly. I am trying to decide which kit to buy myself. Also, I live in SE Asia and there are kits galore. Some of them, I have learned, may have some issue with USB port on a Mac unless they are the genuine Arduino kit. Not sure if you know of that and could advise about that. Thanks for the reply and now am going to subscribe to your channel.
Hey Bruce - I primarily use mac as well. I haven't personally had any issue yet with different Arduino clones, but I know anecdotally where others have to download different drivers to get the device to show up in the Arduino IDE. Popular kits in the states come from elegoo and seeed studio, and I have had luck with their Arduino UNO clones.
As a side note, it also doesn't hurt to have a genuine Arduino UNO, as it is pretty much guaranteed to work with the Arduino IDE off the shelf. Just my 2 cents - best of luck in your endeavors!
Programming Electronics Academy thanks for confirming what I heard about the USB drivers. I will be using my old, reliable Mac Air. Great advice to get the UNO. I will look it up here - they’re pretty cheap kits in Asia with many, many different flavors. Best regards!
Is this software supports different sensors like water level sensors
Is there max30100 heart rate sensor module in the simulator?
*thanks*
Good video, could we use nrf24l01 communication with tinkercad?
Great question! Currently I do not believe it supports that.
Thanks 🙏🏼 dear
Does it have a humidity sensor?
shouldn't the long leg of the LED be conected to GND?
I have tried it but when we have to use tools like Bluetooth it does not work in simulator.
Eg I want to control Arduino with Android.But I can't use tinkercad as it does not do anything like connecting it with laptop Bluetooth so that we can try to connect it with Arduino
Yes, you are right, that is one of TinkerCad's limits at this point.
I wish you publish the libraries for proteus
Instead of creating on the website, is there a way to download to my computer to design without using the internet?
I'm looking for simulator where I can load hex and use virtual serial port. Tinkercad does not provide any of this
is there a version for iPad ?
I find in Apple store „tinkercad“ but clicking brings no tinkercad programm ?
I think they have a iPad supporting website 🤨
I think tinkercad is awesome since I retired that’s all I do is make stuff using both designs and circuits .