They were right about cheap guns 😭 Rebuild kit for Vevor
Вставка
- Опубліковано 13 жов 2024
- Vevor Spray gun
www.amazon.com...
clear coat AmTech product of ProSpray
www.amazon.com...
Base blender/wet bed
www.amazon.com...
Compound
www.amazon.com...
3M machine polish
www.amazon.com...
Presta Fast Wax
www.amazon.com...
Prospray spot blender aerosol can
www.collision3...
You still killing it with the Vevor Triggerman 💯💪🏾
Whaaaat up Champ 🏆🥇 yea man that thing still rocking no break down yet 😁 💪🏼💯
@@thetriggerman954 I’m waiting on mine to fold like they said it would but it ain’t happened yet 😂
Great video ... as far as the regulator I have made a six foot hose with the regulator on on end and coupler on the other ... that way all I need for all my guns is just a barb ... then add the filter at the gun or regulator ... keeps the gun lighter ... I enjoy your reviews ...
Cool idea 🤔 lol thanks man 💪🏼
its not the gun, its the guy behind the trigger. Good stuff triggerman 👍👍
🙌🏼 yes sir. Thanks brother 💪🏼
👌🏾couldn’t of said it better myself 👍🏽
Wha, wha, whadda drinkin there, TriggerMan? Is that a Red Bull? YOU gonna need a rebuild kit if you keep that up!
And then...and then...and THEN, you know what I'm gonna have to do? That's right - Un-Sub-Scribe!!
Nah, just playin. Subscribed for life. Stop drinkin that Red Bull, though. Shit'll killya. 😉😁😁
Man it was late and I was getting ready to head to the gym 😁 needed some juice BeachCity. I only drink three 8oz cans a week. Man said "I'M" gonna need a rebuild kit 😅😅😅😅😅 you wild
Great video Triggerman. One thing I would like to see, but dont know if you do that kind of work, is a small spot reair and how you blend it. To me, blending is always most difficult part and it gets even more difficult on small spot repairs where you dont blow in whole panel. If you do that kind of stuff, would love to see a video. Keep up great work Triggerman!
Thank you man. Here is a video I did on a small bumper blend. Let me know if this is what you were referring too.
ua-cam.com/video/tfKBCfNFkSw/v-deo.htmlsi=02aLrRRslpP8K-ux
I done told u Trigger, more trolls and haters just means ur work is DAT DAMN GREAT 💪💯 so tell ur friends, BUT I AINT TELLIN MY GIRLFREND. . Nooo . . Noooo . . Nooo sir, I wont be doing dat. . . .Nope, aint happening . . 😂🤣😂🤣👍
Nooo nooo noooo not yours. Just the friends 😉 that would be fine 🤗
😅😅😅😅 🤜🏼🤛🏼
The Vevor is putting in the work!!👍, proving all the naysayers wrong!, I think I am gonna get me one 👍
Can't go wrong with it. As you can see 💪🏼
Thanks for the recommendation on the paint gun. I agree with you, it is a good gun. I used it to paint a bumper cover. I was very impressed with the way it sprays. Keep up the good work.
Awesome 😎 more than welcome man. Spray on brother 🤙🏼
Trigger, trying to get my first diy paint job together on a cobra kit. Are you saying you prefer this Vevor over the Drizzle D1? Thank you sir.
@@runningman00900 no sir, at the time I made this video there was no D1 but now that I've sprayed the D1 it's much better and won't strain your compressor.
@@thetriggerman954 Thanks Trigger. Going through all your content and leaving my likes. Hope you the best.
@@runningman00900 thank you man. Any questions just hit me up 🫡💪🏼
Wrap the swivel with masking tape to stop it from moving. I put tape when I dont want it to move. Some times I need it to swivel and sometimes I don't, works for me.
That's cool, I'm just going to remove it lol. Customize the Glock 😉😎
hello triggerman. hope everything is good. what i would like to learn is how to mix paint. i see other videos and they do evrything fast. im a old man. i cant keep up. lol just messing with u. almost at my 50. anyway trigger im a full time caregiver for my mom so i dont have the money to get a good quality spray gun so can u please tell me what i can use on a price range of 100$. take care and see u at the lab.
Hey Louis, I'll work in something about mixing paint. Which gun are you using now? Are you on I.G?
Those supposed low CFM guns aren't really that low as you've found. They're slightly lower than a Kiwami4 as an example...maybe 1 cfm lower or so, but they need extra pressure to atomize well and wind up creating more overspray than a regular transtech, RP, or compliant gun to the point they aren't as good as claimed. I have an older model R500 version. It's collecting dust. It's almost like an engine...there's no replacement for displacement.
Yea I see that. Man them guns have me fogged up in there. I be thinking dam this is what people want to use at home to do this on the side in their garage they're going to have some pissed off neighbors. Booth looks like a car came in with a blown head gasket 💨💨💨💨💨💨💨💨💨💨💨💨💨💨💨💨
@thetriggerman954 most don't realize what they can get away with on a regular gun that's simply turned down when using a residential style compressor, or just use a good detail gun on a really small compressor. LVLP on the super cheap level is almost a gimmick
@@bosshawg7427 agreed, I would say the lph 400 would be great for those guys. Operates at 20 psi and atomizes great plus no fog. It's a gem in my opinion
try a tekna prolite. then you will find a CFM hog is. that sucker takes some air. but sprays really nice. IMO not much nicer than the vevor though. It will spray a higher volume for production completes though.
How do you get around getting sealer creep in your door jams triggerman ?
I just make sure I spray enough base over it. Not really a big deal. If it's something really nice and I wasn't even less of an edge I'll use 3M transition tape.
@@thetriggerman954 thanks man for your reply👍 I always find the sealer goes further in then the paint and your left with a line
Amazon $7999 it’s always been like that for a while ,Beautiful job love the videos ,funny
Cool, thanks brother 💪🏼
make painters men again
love it
🙌🏼 😁
Dude your right on about the swivel. Only a painter would know about that. Honestly the stuff you are saying is ONLY stuff that a good painter would know. like the 800 and 1000. Silvers I like to use a intercoat clear over the blend areas too. just to fill in the scratches. (I am not sure if you call that a wet bed). Honestly your way of teaching is better than the other FL guys that are huge I forget the name of the channel. Your stuff about chemicals NOT USING REDUCER in the clear. But dropping some slow in the formula is the best teachings I have seen in the US....I Literally watched a guy hit 30% reducer in a high solids clear to show how to get no orange peel. I would give that about 3 years then total delam....(failure) then they would say that clear delaminates. NEVER SEEN THAT....It only does that when you totally F up the chemicals. HS clears need to not be reduced more than the can says. Hey little tip.....Try Kapci 6030.....The easiest (after the learning curve) Clear I have every sprayed. lays down completely flat. HS. and works great. Cheap as hell too. Not many black painters around In CA. Good to see. Like my buddy Sprayway customs. Total respect. Keep it up.
Thanks man. If you keep watching the vids you'll find that I tried the Kapci clear 😉 that's stuff is thick as a mutha FFF 😱
Yea man I've been painting professionally almost 30 years now. I don't know it all but I know a whole lot I've worked along side of of the legends in my town and learned a lot from them. And there's still so much to learn. This UA-cam is a blessing to sol many.
@@thetriggerman954 Even the Latica is nice but too soft for me. 6030 rips and lays down flat. I have been using Tamco but they got too pricy. and it is much more difficult to spray. My buddy thins it too much and wonders why it wont last.....Well it aint the clear.
How much for the repair and refinish of that roject. Not including materials. Not shop cost like if u were gonna do that at home like some of us???
This was $1,700 total cost for everything. So just deduct.
Thank you
@@tedc9306anytime 💪🏼
Nice work i spray water base that paint can kill a paint gun i find it hard to clean becauce i paint 4 cars a day on average some time more i use astro he guns for base becauce if it last me 6 months so be it do you lke that vevor better than that blue dv1 colon
Damn that paint is that bad? I mean I've always heard it's not fun to spray but geesh that sounds like a real headache. I personally like the vivore over the DV1 clone. I use that vivo gun all the time especially when I'm in a rush and it's almost time to go home and I don't want to clean a gun that good lol
@@thetriggerman954 yea because you are spray latex base in your area Florida high humidity it wants to gell up but it dose have very good color match remember when you say converge in first coat when you use wet bed don't spray it on repair spray around it have second gun ready with color it will look mess up but when it flashes off it will become uniform you have to have blowers on it if you ever pinted a fence with a brush on a summer day and paint gets thick it will do that in a paint gun that why I like cheap guns to spray base its the painter not the gun nice videos you are a very good painter
@@GabrielPigman-sh4zd thank you brother, I hope I never have to spray that stuff 🤞🏽 I only have 10 more years until I retire so if I can make it 10 more years spraying solvent base I'll be good lol
My sata 5500 is 2 years old. I use it for base only. I’m having to turn in the fan because it’s splitting when fully open. Air cap comes apart sometimes sort of weird. I lubricate everything so IMO sata hasn’t held the quality standards since the 3000.
It’s your channel but I have a request. Was wondering if we could see some test patterns to get an idea what each pattern looks like. We appreciate what you do thanks.
I keep hearing that gun is having issues. That's why I never purchased it. I love Satas and I think they last forever. But I've definitely heard that before. My 5000 works perfectly I've had it like 10 years. I'll put together something on spray patterns Thanks for watching and chiming in 💪🏼
That's looking mighty nice, Vevor Master.
Still doing the turbine thing or I would get one myself.
I got a busy 4 day weekend of work and taking time out to hang out in the yard.
See u on the next one👍
Thank you Mr. Turbine Master 🙌🏼😎
What clear coat is hard like European cars? I got my car painted and the clear coat is so soft even after 6 months of letting the paint rest. A simple wipe with a microfiber cloth leaves marks
All clear coats get hard sounds like somebody messed up while spraying your car. Maybe they didn't put enough activator maybe the wrong activator. Even the cheapest clear coat gets hard so I'm not sure what's going on there man. So get a few of your buddies get the strap and go back into his shop 🤷🏽♂️
Amen Bring it Back!!
😎💪🏼
Thanks trigerman for keeping it real
Alwaysmy man 💪🏼
As always top notch work!!! Spray on trig!!!
4sho 🤜🏼🤛🏼 thank you Adam 🫡
Just a question trigger can I sand 800grit wet for silver blend ? Or will scratches show? Man my old shop when it came to silvers they’d always make me sand wet with 1200-1500 on blend areas for silver they would say silver shows 800 grit scratches, my new shop there finishing primer on 500-600 grit and grey scotch bright for blend areas they got me conflicted idk which way is better
Your old shop sounds old school which is good. That's the way I grew up prepping for silvers. And there was no such thing as a "wet" bed we blended silvers with no problem. And times changed they started going more coarse with 800 and even 600 but then they came with the wet bed to hide all of the scratches. Both ways are correct just a different path to the same destination. Old school way is flawless I just don't like the water and wet feet but it gives a much better job and cleaner because the water is somewhat cleaning the vehicle instead of creating dust. Hope that helps
Thank you bro helped a lot and thanks for putting it in that perspective for me bro
@@The_paintman anytime my man 🤜🏽🤛🏽
One more thing that I’ve also realised and it’s taking me time to get used to is my old shop the old school shop they make me kill all the shine when sanding any panel wether it be a new panel or blend panel the boss man did not want to see a drop of shine but this new shop they be telling me I’m old fashioned and there’s new technology such as a adheshion by the name of image they spray all the panels or parts adhesion before paint and they say it’s been tested apparently they sprayed a engine bay that was not sanded and 3 years later the paint still hasn’t peeled or cracked so they don’t want me wasting my time apparently on sanding down panels, man my heart hurts when I see shine left in a panel before painting hahah my old shop would tell me slow down kill all shine and new shop tells me hurry up and stop wasting time sanding
@@The_paintman you don't have to kill all of the shine. That's really just a small amount of texture your leaving. They both are ok. Just adjust to whatever the shop wants you to there's nothing wrong with it.
What conditions dictate which sealer to use, 2k or 1k ?
Usually 1k is for cheapy stuff. Doesn't really do much but it's better than nothing. Anything nice you'll definitely want 2k
is an amazing gun brother ,,,, not only you like it ,,,there is many season painters that agree with you out there,, i got it my self and this gun is a copy of a sata 1500 ,,,,, and check out how that sata 1500 paint ,,,, everybody like it ,,,, the vevor is the same inside of the sata 1500 with few outside changes ,,,, but hey spray the same
Yea man gun does a great job. It's still holding up 8 months later.
Can you mix different clear coats together??
I've seen Some people do it, it can be done. I wouldn't advise it and I've never done it myself.
What about the eastwood gun?
It gets the job done. But this is my favorite over all of those budget guns.
Trigger, are you using the HPLV version?? Thanks for these videos man. And you are correct, these youmg fellas are too soft. Too much influence to steer them that way.
Yea man guys painting cars wearing women's underwear 👙🩱 and yes brother it's an HVLP spray gun. Link should be In the description so you can read on it
Some of them other fools will just stick the upside down in lacquer thinner and let it sit. That's why they need a rebuild kit. I only clean the area that the product is going through. That area is made for solvent based materials. All the seals and everything else will have to be replaced if you introduce them to thinner. I have never had to buy a rebuild kit for any gun.
Amen brother. I've never bought one either. But I have soaked complete guns in gun stripper and nothing ever happens. You have to be pretty reckless to ruin a spray gun and need a rebuild kit.
it ok I used it at work with single stage
Top shelf,going to buy another one
Can't beat the price 🤷🏽♂️
Appreciate the shout out trigger… Great video…
4sho ✊🏼
Triggerman another terrific video you are absolutely the mr. Miyagi of automobile painting
Thank you sir glad you can appreciate the vids 🙌🏼💪🏼
What paint you use brotha spies hecker ?
We use Prospray
I must be spraying wrong because when I go to spray the clear after a half hour of the base drying the flakes come off the Plastic and land in the clear what is that do you know
Maybe you're buying cheap plastic, or spraying on the wrong side. When you roll the plastic out it should say "spray this side" it has a coating that prevents that from happening. Cheap plastics will do it too.
I haven’t use my aeropro 610 yet. I’ve been using the tcp global guns with good results. So do you suggest making the 610 a primer gun? Lol…it looks too nice to use primer in it!
That's what I thought too lol but go ahead and try it. And let me know what you think. I can't really use it for painting professionally but it make work for some.
@@thetriggerman954 Not for nothing, I just found out that the tcp global guns are aeropro’s. TCP global are just hvlp, but the parts are aeropro. Smh
@@dollabillbrunson8107unfortunately, the R500 gets rebadged every so often and comes out as another hit, or miss as you see. At some point, it becomes time to just to step up to a better gun overall and skip the LVLP fantasy. In reality, it doesn't exist. You can turn a powerful gun down, but you can't turn a weaker gun up without some sacrifices (more overspray, wasted paint, uneven fan, etc). I've tried for years. If you want a gun that sips paint and air, you'll need something on the level of a LPH400 or a beefy detail gun (small jobs).
@@bosshawg7427 I'm not a professional, I'm a DMOC (Do my own car) type of guy. I guess imma play like roy Rogers and slooooww doown! If I get into the collision and restoration field, I will definitely step up.
@dollabillbrunson8107 I'm definitely no pro. I'm the same as you, but I've found it more detrimental in choice of spray gun since a good exhaust in a homemade booth isn't easy and a lot of pro guns eat CFM like yesterday's lunch. The R500 is ok... just very slow. The EuroHE103 I've found to be a decent step up. It doesn't chew threw air and can lay down a wet coat pretty nice without exceeding 20psi. Overspray is quite low. I think I found it cheapest at JBTools.
The follow up videos are the best. I just order their 3 gun set. Pretty stoked about starting my paint journey
Thank you man. I'll be sure to include more follow up vids. Do you have this gun? Or just getting the 3 gun set? This one is a beast.
@@thetriggerman954 it's on order. It'll be here tomorrow. Collecting as much information as possible before I ruin some projects.
@@Go4BrokeOffroad cool. Report back and let me know how you like them. 💪🏼
🤞🏼
@@thetriggerman954 I have used them a couple times now. It's probably me. Lol
@@Go4BrokeOffroad you've used them and??? Good bad what's up
You made Eastwood 1.3 air cap sell out everywhere bro. Waiting for the restock.😅
Man stop playing. Yea right. ?? 🤔
How do you clean that mask of over spray ?
I change the protective sheets. Here's a link. Let me know if it works.
amzn.to/3sfStUy
@@thetriggerman954 you the man thank you!!!
@@robzillagarage no problem man 🤜🏼🤛🏼
thanks for your video's bought the 802 hade a problem with an air cap seal was compensated for it emailed rongpang maker of the gun they don't sell that seal separately , bought new air cap all the seals glands and springs for 30 dollars delivered in a week , hard to beat the price and service very happy , have a great day
Damn can't beat that deal for $30 good deal thanks for the info might help something here. 🤜🏼🤛🏼
Just got my vevor, the aero pro has already failed leaking air at the tip
Got dam 🫠 Aero Pro straight 💩💩💩💩
Trigger I will keep you posted still doing prep work
Ok cool. Lemme know 🤜🏼🤛🏼
I need a mini gun, can you recommend one. Ty
My favorite is the Iwata lph 80 I have it in the 1.2 tip. Astro makes a few decent ones if you on a budget. I have a few SATA jet minis as well. And I have the Devilbiss Sri mini. But my personal fav is the Iwata it's a little over 2 cfm
That'll work. Ty
@@tedc9306 more than welcome 💪🏼
All the fairies be holding committee meetings with Tinkerbell right now, all about you brother 😂. Im glad yo see the Vevor holding up well after 4 months, not bad not bad. We definitely gotta get the trade back to where it was, when we made whatever we had work for us and learnt how to deal brother.
Great video, again, had me laughing my man. Have an awesome weekend 🤙😎😉
CoCkOooo, 🤣🤣 where is the meeting taking place so I can throw a paint gun filled with Dynamite through the window 😂 have a blessed weekend my man 🤜🏼🤜🏼 🤙🏼🏌️⛳
@@thetriggerman954 somewhere in Australia, so I heard anyway.... I can smell the pixie dust they fart from here 😂
Have a wicked good weekend yourself too brother
Another great video Triggerman Vevor is the King.
Thank you sir 💪🏼👑
I love the swivels on the guns. Like my Sata 5500. It has the swivel. But good vid tho. 👍🏾👍🏾
😒 you would like something like that. You got ADHD you just like to spin the gauge around 🤣🤣 thanks Trey 💪🏼
@@thetriggerman954 lmao 😂 😂😂 that’s just me. Ion have to worry bout my line tangling up. That shit be bothering me with the tangled line. I be in the booth yelling like HTF u get tangled like this.
@@treysterthepainterturner8404 lmao 🤣 man you wild
@@thetriggerman954 😂😂😂 fr
Haha, you are wrong. There is a gun out there for$24.dlrs that had the gun body of an iwata, and a sata fluid tip design!
Geesh $24 does it spray ok? That's crazy 🤣
Opinion on 1k sealer?
I think 1K sealer is less effective as 2K sealer but at the same time 1k sealer is better than nothing at all. I have both in my booth they both serve their purposes. If you're not doing a show car or painting a paint job that you want to last for 35 years I think the 1k sealer is just fine.
@@thetriggerman954 awesome thanks. Repairing my truck. Hit a deer 🦌
Lately I have been using a SprayIr gun. it is an R500 knock off and ,,for me at least it creates a lot less over spray...
Never heard of it. Gonna have to look that up
@@thetriggerman954 Actually it was a misspell, it is the SprayIt R500
@@douglasbird5246 ohh I've heard of that gun. I heard all positive things. I think UPK uses that gun too.
I've sprayed with all kinds of guns from HF guns to the tekna copper and binks #7 its 99.99!% the person painting not so much the gun.. 1k paint gun won't make you spray any better.
I hear that. Say it loud and say it proud. 🙌🏼 but they say you're not professional of you use these kinds of guns.
Vevor 4Evor
It's not the gun,some colors are just to transparent,some transparent colors usually require a silly 6 to 7 coats to avoid that on primer spots.
Lol I know that 😅. It's part of an ongoing back and forth we had in the channel for a while. I know a spray gun doesn't determine base coverage.
@@thetriggerman954 oh 🤭🤭🤭 or those guys that reduce their paint 1 to 1 when the can says two to one.🥳
Looks good to me but i wouldn't get away in my workshop i, i would have to cut and buff . On my serious paint i use my Fuji guns which i keep clean . I've bought cheap chinese guns and there good but they always end up a primer gun . Great work Triggerman big respect boom boom
What would you have to cut and buff? This is more than acceptable for any insurance work, I've been on progressive direct, Geico ARX accounts is hardly any dirt no excessive orange peel. So what would you actually be wet sanding and buffing? Or does your shop just like to have glass show car finishes on every paint job? Like custom work? You probably have that car show look on every car. 😅 we do simple insurance work my man.
@@thetriggerman954 I work in a small 2cars workshop and do trade work week to week they accept what i produce . From time to time i get the odd Ferrari or Aston Martin in because off my reputation as a good painter (?) . I'm old school and try my best at every job and get frustrated when its not right.
@@jimmypratt6450you're doing too much with that reply 😅😂
@@jimmypratt6450 I feel you brother hey if you got to cut and buff a Toyota Camry so be it. I too have dreams to become a good painter someday 🙌🏼
Spray on brother 🤙🏼🤜🏼🤜🏼
@@bosshawg7427 shake your hand and kick you in the nuts at the same time 😂 I'm learning to love this UA-cam thing.
😂,,,😂😂😂😂😂😂 trigger make the boys men 😂😂😂😂😂😂😂 I say bring back the calenders brother 😂😂😂😂😂
I know right. We need to bring it back to the old days 😁
@@thetriggerman954 old school is the best bro. We lived life , hardcore, today's youngsters won't manage. . We made the saying don't hate the player ,hate the game
@@mitheshdeendayal7498 exactly 💯 I tell my younger cousins all the time " I know I'm older and I'll die before most of you but at least I lived a real life and experienced real things that you guys will never even dream of" they all ride around on electric bicycles I'm like what the hell used to be a group of 7 to 10 of us get on our bikes and ride 15 mi one way to the beach Have fun and then hike back home before dark. The good old days ❤️
I bought the gun. It’s a nice machine but I feel like it puts out too much material compared to other guns
It does put out a lot. I spray it at 2.5 turns out. Just adjust the fluid knob that's what it's for.
No comment on all the other wing wang specials but the vevor has held up 😉😉😉😉
😅😅
Wing Wang 😭 man you crazy Mr Brown
@@thetriggerman954 🤣🤣🤣🤣🤣
Looks like a SATA gun down to the tip.
Yep just like the black widow looks like a SATA down to the tip. Every gun they make looks like another gun.
So f the Chinese gus don't last through an gun washer then why don't you hand wash it my cheaper blackwidow has been used for 5 prodjects this year and I've wash by hand and never an issue for me brother! Everyone hates on Chinese stuff but I think any country has good and bad products depending on what you buy!
😅🤣 man they last through anything. That's just diva talk. We're starting a movement to "Make Painters Men Again" one painter at a time. So then everyone will be on the same page and support their brothers out here. I can dream 😁
Aye!!!
Can’t you use electrical tape or duct tape to stop that thing from spinning,Contact the company and see if they can make you a special edition trigger man gun I’ll buy one of those also give you some potato chip money,Hahahahahaha,Make a gun all blue special edition
🤣🤣 them people won't make me nothing I'm just a small fish in the UA-cam paint community. ☹️
Man that swivel adapter gauge would have me f’ed up real quick. That’s why I hold the line w my left hand. I see that NY plate, that’s my area. Drinking and watching my weekly trigger man video. Yo enjoy the weekend.Said it before I’d like to see your thoughts on sata 5500. Telling u man firehouse. U a real shooter curious your thoughts
I get a lot of mixed reviews on that gun. I asked my paint rep to get me a demo to try. I'm going to remind him again. NY in the house. I might be coming to the Bronx in December to see my girls family. Let me know if you any where near BX son 😎
@@thetriggerman954 fair enough on the mixed reviews. I’m not 100% sata boy they’ve pissed me off before trying to replace parts,but just saying the I tip 1.3 full throttle dialed in can do some things. Heavy. I can smash a hood. Come December will do.
Triggerman towards the beginning of your video I figured I would leave a comment earlier just in case I was to have a brain fart where in the hell did you find a video of Oprah Winfrey twerking in her mansion in Maui getting herself all fired up in order to head out on the town to attempt to buy some of the misfortunate peoples properties up sorry triggerman I guess that was some poor humor on my part I apologize some of it is true
🤣🤣🤣 man that's too much pork for one fork 🍽️