Меня удивляет то что людей вообще не смущает что их называют при каждой сварки подшипника долбоёбами и дальше выкладывают видео с этой чудной операцией
Some of these are pretty amusing. The time it takes to fabricate those gadgets for clipping bits of slender rod into shorter lengths would allow you to make a lifetime of cuts in the same material with a grinder and cutting disk.
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
the guillotine made from an open ended spanner won't work for long as the fixed blade the spanner works against is only mild steel. i suspect the rod being cut is very hard and brittle to snap like that. i would think a mild steel rod would bend upwards and not be cut.
The concepts are all awesome but so many problems with assembly. I was sad watching a bearing get welded.. especially since it was a sealed bearing!. For that application an oil bronze bushing would work fine.. even just a regular bronze or brass bushing. Never weld on a sealed bearing. One you burn out all the grease inside (notice the small time it was on fire) and also, the weld is not going to hold. Bearing races are high carbon hardened steel. They do not weld very well.
что мешает резать проволоку и квадрат с помощью УШМ ? Сварка подшипника вообще без комментариев. Для того чтоб стягивать стропу есть уже давно заводское решение, гораздо более практичное.
@@evgen154rus2 значит и сварки не будет без электричества чтоб херней не занимался это раз. во вторых чтоб эту херню сделать он пользовался УШМ, значит есть, это два. Умник.
@@user-ln1ee3cn5q Я тебе в принципе говорю! Проволока есть я резать не чем, вот для этого и делается подобная штуковина, если ты реально в "поле" ❗🥴Умник.
@@evgen154rus2 если я реально в поле то я воспользуюсь генератором, если его нет то я и не полезу в поле чтоб чтото делать, на худой конец существует такой инструмент как ручной болторез, который легко справляется с катанкой 8 мм, возможно даже пруток десятку осилит, но я не пробовал.
Why do UA-cam welders use this weird, multiple tack weld method instead of using a smaller rod, lower amps to put down a beautiful continuous bead. It irritates me to death. Learn to weld!
You have to buy a bunch of power tools, lathe, welding machine and a whole array of hand tools to make some manual tools from not so scrap metal and parts. 😂
Usually people already had most of these regular store-bought hand tools to do some of this work only those who don't are really making it difficult and expensive if they already have them it's easy cheap
Amazing diy tools thanks for sharing
Замечательно, спасибо! 🙋
Привет Мастеру благодарю за видео зачёт вам...,,,
Меня всегда удивляет, как вы умудряетесь подшипник приварить к железу?🤔😂😂😂
меня удивляет в этом видео вообще почти всё...
Меня удивляет то что людей вообще не смущает что их называют при каждой сварки подшипника долбоёбами и дальше выкладывают видео с этой чудной операцией
Buenos días hermano excelente herramienta gracias por enseñar desde Venezuela Carabobo Ali Molina bendiciones 🙏
Good job friend,waithing next video
The third hand tool seems pretty good quality design. If you happen to have the materials like a random 100mm? ball bearing for a base weight.
Thật tuyệt vời chúc a sức khỏe và thành công trong cuộc sống
Olá
Projetos muito bom. Excelente
Also visit my chanel brother
Wow brilliant idea great sir thank you for sharing.
BOM TRABALHO MESTRE . ÓTIMO VIDEO, 👍. 🇧🇷
Muito profissional . Top demais!
K KK KK KKN njjkkknnkk JJ JJ JJ
Very interesting diy...useful tools and i will make it for my workshop..thank you..regards⚘🍻
Some of these are pretty amusing. The time it takes to fabricate those gadgets for clipping bits of slender rod into shorter lengths would allow you to make a lifetime of cuts in the same material with a grinder and cutting disk.
Thank you very awesome ideas I will try some thanks👍👍.
Very professional work, Thanks my friend, Big like ♥️♥️♥️♥️
Great innovations! But please ensure you practice SAFELY procedures...like
Wear gloves
Don't remove safely guard on grinder
Best idea, thank you
sat vụn qua bàn tay thợ thì tuyệt vời
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Wow! All these tools are useful 👏
I simply love your video style, truly refreshing and creative.
Nice video, thanks for sharing it :)
excelente ! thanks
Wow nice tool
God bless us 🙏
При просмотре подобных видео в голове сама собой начинает играть мелодия "would i give"...
Блин,да тут все годное.Подписался и палец вверх поставил.Продолжай и дальше бро!!!
the guillotine made from an open ended spanner won't work for long as the fixed blade the spanner works against is only mild steel. i suspect the rod being cut is very hard and brittle to snap like that. i would think a mild steel rod would bend upwards and not be cut.
Great job
Interesting stuff but make a tap wrench and way to hold steel on table when drill it
it turns out well, it's a pity that I don't have a lathe and a plasma cutter , class
انت مهندس رائع
Chia sẽ hay 👍🏻
wow amazing talent im really enjoy for watching
i like this video thank you for sharing it to view and i wish your channel more successes
Buenos días amigo, podrás hacer una maquina más robusta que se pueda romper fierros de 5/8.
Гениально и просто...
Very nice 🙂👍👍
Mantap bosque👍👍👍 salam kenal
very good idea
Good ii boss 👍👍😊
2:34 😮 oh my goodness, will try at home
Mantap bos ku
Гибочные и режущие инструменты из лома сделанные благодаря сварке.
Век живи век учись.
Good 👍😊
Muy bien hecho
Que tipo de óleo você usa para furar metal
Muito bom.
あなたのアイデアは素晴らしいです。参照してもよろしいですか?
the one with the drill nice
The concepts are all awesome but so many problems with assembly. I was sad watching a bearing get welded.. especially since it was a sealed bearing!. For that application an oil bronze bushing would work fine.. even just a regular bronze or brass bushing. Never weld on a sealed bearing. One you burn out all the grease inside (notice the small time it was on fire) and also, the weld is not going to hold. Bearing races are high carbon hardened steel. They do not weld very well.
Good job
Make a hidraulic press using hidraulic car jack.
Ну кто варится к подшипнику? Тут и обойма в самый раз подошла б.А так идея хорошая из за малого радиуса на углах.
أنت عبقري رائع
Bravo 👋👍🏻
В любой непонятной ситуации приваривай подшипник и делай режущие кромки из стали пластилин 3
good find
Very beautiful and best
Наглядный пример, как потратить кучу времени на изготовление "инструмента", который служить будет гораздо меньше времени, чем его создавали😂😂😂
Его видать в детстве проволочки обижали.
К Доктору его!
Ты это..за всех то не говори!
Super tare.
Обратите внимание на его руки !!!! Ему 52-54 года а это большой опыт и навык
В любой непонятной ситуации приваривай подшипник))))
Thanks 💐
Merci pour tout
It's magic ❤
Ide brilian para tukang
Without tempering it will cut about 10 pieces and be destroyed
что мешает резать проволоку и квадрат с помощью УШМ ? Сварка подшипника вообще без комментариев. Для того чтоб стягивать стропу есть уже давно заводское решение, гораздо более практичное.
А нет у тебя ушм умник и лепездричества... 🙄🥴
@@evgen154rus2 значит и сварки не будет без электричества чтоб херней не занимался это раз. во вторых чтоб эту херню сделать он пользовался УШМ, значит есть, это два. Умник.
@@user-ln1ee3cn5q
Я тебе в принципе говорю!
Проволока есть я резать не чем, вот для этого и делается подобная штуковина, если ты реально в "поле" ❗🥴Умник.
@@evgen154rus2 если я реально в поле то я воспользуюсь генератором, если его нет то я и не полезу в поле чтоб чтото делать, на худой конец существует такой инструмент как ручной болторез, который легко справляется с катанкой 8 мм, возможно даже пруток десятку осилит, но я не пробовал.
@@evgen154rus2 и много проволоки можно нарезать, когда у тебя режущие кромки из ст3?? они как бы не мягче этой проволоки, вас это совсем не смущает?
Why do UA-cam welders use this weird, multiple tack weld method instead of using a smaller rod, lower amps to put down a beautiful continuous bead. It irritates me to death. Learn to weld!
Может и ничего но все эти приспособы очень специфические узкого направления. Много кто делает и катанки скажем арматуру?
👏👏👏.....👌👍👍👍
имея сверлильный станок,плазморез делает палку-копалку....
You have to buy a bunch of power tools, lathe, welding machine and a whole array of hand tools to make some manual tools from not so scrap metal and parts. 😂
M
Not true
Nah all you need is an angle grinder, a welder, and some creativity
@@mpirokajosephmgcokoca2355 6:23 6:23 ada 😮😅😮7
Usually people already had most of these regular store-bought hand tools to do some of this work only those who don't are really making it difficult and expensive if they already have them it's easy cheap
Goodvideo
Good works❤❤❤❤
👍♥️🙏🙏🙏🙏🙏
👍👍
Exellent
Поделки из разряда,пусть будет потом сдам в чер.мет.
Music was hurting my head thought an alram was going off
Workplace health and safety has left the chat 😂
молодец
После того, как этот молодец приварил железяку к поджипнику я точно понял, что он гений
mantap bang
👏👏👏👍👍
Mantap👍
Great
Tambhn utk ukuran itu yesss
Que tipo de electrodo usaste
Доктора в студию😅
👍👍👍👍
👍👍👍👍👍👍👍👍👍👍👍👍
Genius
Every professional working
Ok
smart-ass video where not everything is shown making the device 👇👇👇
❤ OK
Goodddd
Werygood