Replacing Spark Plugs on Subaru H6 3.6R EZ36 Engine - Simple and Easy! Pt. 2: Driver's Side!

Поділитися
Вставка
  • Опубліковано 31 гру 2024

КОМЕНТАРІ • 161

  • @sc0rch3d
    @sc0rch3d 6 років тому +17

    Great video but sadly I could not complete the job on my 2015 Outback 3.6 engine. At 1:07 you remove the battery and plastic tray (same as mine). Under that tray is a secondary battery metal tray (bolted to the frame) with a vertical wall between the battery and engine. There are 2 bolts opposite the spark plug on the frame that hold it in place and I cannot get to them with a standard ratchet. Hoping I can visit hardware store for a ratchet with a longer handle. This seems like an engineer lazily solving a heat problem in my generation car. :(

    • @FayeHadley
      @FayeHadley  6 років тому +7

      Ashley Keith OH no!!!! I have not run into this yet but when I do I am absolutely going to make an addendum to this video and update with more info! Thank you so much for the heads up!

    • @sc0rch3d
      @sc0rch3d 6 років тому +13

      Finished the job with the help of my dad. Had to remove the plastic skid plate under the car to get to the bolts holding the battery tray to the body. After that, we could get to all the spark plugs. The one closest to the driver is a real BEAST so be prepared with time and patience to get it done.

    • @FayeHadley
      @FayeHadley  6 років тому +9

      @@sc0rch3d YAYYYYY!!! I'm so freaking proud of you! And thanks for the input! I am going to pin this message so that everyone else watching will be able to have this information.

    • @scormier239
      @scormier239 2 роки тому

      @@sc0rch3d Would this be easier from under the car?

    • @sc0rch3d
      @sc0rch3d 2 роки тому +1

      @@scormier239 see my reply just above. We got the job done.

  • @johndries6743
    @johndries6743 2 роки тому +5

    You are awesome all around. I would have never tackled this job before seeing this video. I followed your instructions to the tee on my 2018 Outback w/ 3.6 engine. I was slow and meticulous but in 5 hours the job was complete. It gave me great satisfaction knowing I did a good job. It wouldn't have been possible without your instruction. Well done, the video couldn't have been better and the narration was sweet. You should be very proud of yourself! Thank you!

  • @barrycollins5518
    @barrycollins5518 2 роки тому +6

    A magnetic 5/8" spark plug socket is a good investment, and I was able to do it with a 3" wobbly extension, but yes that last one took some patience. This is a great video, and my mechanic quoted me $635 on my 2010 3.6 Outback. Thanks Faye for saving me some SERIOUS coin!

  • @mamallama8743
    @mamallama8743 6 років тому +29

    The most extensive car work I have ever done was changing the bulb in my headlight a few months ago. I don't even know how to change my oil. I watched your video, and have successfully changed the spark plugs on my new 2010 Legacy 3.6!! It took over five hours, and I have a few giant bruises, but I am stupidly proud of myself. Thank you for your videos!

    • @mamallama8743
      @mamallama8743 6 років тому +3

      Also, if you take requests, my car needs new wheel bearings, and I'm hoping to do it myself!

    • @FayeHadley
      @FayeHadley  6 років тому +7

      Ah! I just did wheel bearings literally yesterday! I wish I had seen this, I would have absolutely filmed it for you!! Well, I can never predict what type of work my customers are going to want next, but the next time I do wheel bearings, I will remember this and film the process!

    • @FayeHadley
      @FayeHadley  6 років тому +6

      Mama Llama! This comment literally means the world to me. this is exactly why I make these videos: to reach people like you! I am so happy that you found it and that it helped you! This made my day :))

    • @ikeperez3922
      @ikeperez3922 4 роки тому

      @@FayeHadleyWe are on our 4th Subaru (Legacys and Outbacks) and only thing that we have had to spend money on at the shop has been wheel bearings. $450 each wheel so I am sure you could help me save some $$$. I'm in Ohio so no business lost for you. ;) Keep up the great work

  • @trevorsenseney7666
    @trevorsenseney7666 2 роки тому +3

    Faye, You just saved me over $1000 from a body shop. I have never worked on my car before, but I knew I could get this done with just a bit of patience. I was able to remove everything and get everything buttoned back up in under 2 hours. Thank you so much!

    • @FayeHadley
      @FayeHadley  2 роки тому

      Oh my gosh this makes me so happy, thank you!!!!

  • @lylemorse6959
    @lylemorse6959 6 років тому +13

    I have watched so many videos with this procedure and you are by far the best! Your camera work is steady, you break it down simply and give great insight on the required tools needed. Well done Faye!

    • @FayeHadley
      @FayeHadley  6 років тому

      Lyle MORSE thank you so much! It did take a lot of time, so I'm so glad that you appreciated it!!!!!

  • @holeshot3992
    @holeshot3992 2 роки тому +3

    Thank you, Faye. I thought for sure I was going to have to lift the engine up a little. But I did modify the process some. I used a non-wobble extension (same length) in the spark plug socket and the the wobble in the ratchet, and basically left the non-wobble in the spark plug socket for the entire process for all of the plugs

  • @888888greg
    @888888greg 6 років тому +11

    Nice to watch somebody that knows what they're doing...and good job with the camera too.

  • @buddy8225
    @buddy8225 5 років тому +2

    I have alot of respect for you. Not afraid to wrench on a vehicle or start your own business. Your inspiration to young ladies out there. Keep up the good job. Enjoy your videos.

  • @michaelmgx
    @michaelmgx Рік тому

    Thanks Faye. With your help I did it and exchanged all spark plugs on my Subaru Tribeca. And I agree, small hands are an real asset here.

  • @pfczimmerman91
    @pfczimmerman91 4 роки тому +1

    By far the best video out there did this on my 2008 Subaru Tribeca took me about two and a half hours the back right one was a pain in the ass follow everything she does and you'll be fine great videos saved me $500

  • @jschaefer8549
    @jschaefer8549 Рік тому +1

    I just replaced the 4 spark plugs on my 2013 Outback 2.6 4 cylinder engine in about 90 minutes and the instructions were very helpful. Nicely done video! I didn't have to lift the engine like others had suggested and I have reasonably big hands. The key was the magnetic 14 mm thin wall magnetic spark plug socket with a swivel on the end (Amazon Workpro model W074528AE). The clear camera angles helped me see exactly how to unclip the electrical harness without damage and how to remove the coils and plugs. I also like the tool inventory at the beginning. Keep up the good work !

    • @FayeHadley
      @FayeHadley  Рік тому

      I'm so glad it was helpful! Thank you!!!

  • @JohnResciniti
    @JohnResciniti Рік тому +2

    Those back plugs are a bear! I did this on my 2006 OBS LLBean 3.0H6. I went from underneath, but the front 2 look easy enough from either the top or bottom. Great video, Ms H! Great camera angles for sure!

    • @FayeHadley
      @FayeHadley  Рік тому +1

      Thank you!! It took SO LONG with my phone haha so glad you appreciatesld it!!!

  • @richardbelley5610
    @richardbelley5610 2 роки тому

    Great job! Had the P0305 and P0304 engine code. Figured I would check the spark plugs first. My car's engine is the 3.0 H6 . You prepared a work of art video on the topic and it showed pretty much same configuration as the 3.0. No other video matched my situation but yours. And it happened to be one of the best video instructions I have ever seen. Thank you so much for the attention to details and quality of images. Boy that was a tight fit... whoever designed the amount of clearance for spark plugs install must have come from another world.

  • @junkcrap4998
    @junkcrap4998 9 місяців тому

    I have the a 2018 Outback 3.6R and it's time for new plugs. You have been so helpful as I was ready to jack the car and go under. Your tool tips are spot on! If you wobble too much and break a plug off, you are done.

  • @kparnall4
    @kparnall4 6 років тому +2

    One of the best repair videos I've viewed. Liked the description of the proper tools and the tips on using them. Will make changing the plugs on my Subaru much easier at a fraction of the cost. Well done and Thanks.

  • @m00seandsquirrel
    @m00seandsquirrel 2 роки тому +2

    Very well done! I watched a few videos in prep for changing the plugs in my Tribeca. Your vid had the clearest, steadiest shots of what needed to be done. Great explanation too. Thank you!

    • @FayeHadley
      @FayeHadley  2 роки тому

      Thank you so much! That means so much to me! I'm so.glad it was helpful for you!!

  • @ikeperez3922
    @ikeperez3922 4 роки тому

    Watching this video made me a fan. Faye, you saved me $400. I watched your other videos and you do a great job inspiring us to do our own work. If I was back in my hometown I'd stop by and thank you personally with some Chachi's tacos. Thanks Faye

  • @joubess
    @joubess 5 років тому

    Great video! I have a Subaru Forester 4 cyl and there is a lot more room to get to spark plugs. Also, no one who ever removed my battery reset my radio station presets or set the clock. That is a wonderful touch of great customer service! Way to go!

  • @Wbasaraba
    @Wbasaraba 4 роки тому +3

    Thank you so much!! you have added to my you tube mechanical certification lol Just picked up a 2007 tribeca b9 and im loving being able to do things myself. Your great by the way, I picked up the ap-200 for my scan tool. changed a highinput knocker sensor yesterday. k so keep these Subaru videos coming please. I have the H6 3.0.engine. ps call me :) that chicken was dope

  • @adam1885282
    @adam1885282 Рік тому

    I did this job on my 2010 h6 eight years ago at 60k and it’s due again now at 120k. I don’t remember it being too bad but I’m watching vids to get ready. Thanks!

    • @adam1885282
      @adam1885282 Рік тому

      So I knocked this out this morning, it took a little under three hours from hood open to starting the car. If the driver side rear plug had another inch of clearance it would have been a two hours job, what an absolute mess. Next due at 180,000 and I'm not sure I'll still have the car if it takes another 8 years. I initially tried to skip unplugging the coils which was a mistake, they have to be unplugged if you're to have any chance.

  • @M.G.Fishing93
    @M.G.Fishing93 6 років тому +6

    Thank you for posting these videos. I own the same model year and engine type. It's always helpful to see it done before doing it yourself.

    • @FayeHadley
      @FayeHadley  6 років тому +3

      i.hernandez I agree! I'm so glad it's been helpful for you.

  • @frankburger9986
    @frankburger9986 2 місяці тому

    Thanks! Fantastic video.

  • @christopherguy1217
    @christopherguy1217 5 років тому +1

    Wow, I've never had a mechanic take the time to reset the radio stations after disconnecting the battery. Good job, very instructive, my Subarus a little older but this should help.

  • @Joseer09
    @Joseer09 2 роки тому

    Thank you so much for these two videos. I watch them, followed along, and was able to change all 6 plugs and a coil. I wouldn't have been able to do it without these videos. I took my time and had to be patient but I can say this was totally the best thing ever. You gave me confidence in myself to keep on going and try to fix things. THANK YOU!!

  • @natecuenca8951
    @natecuenca8951 5 років тому +1

    Great video Faye! Your positive enthusiasm throughout all your videos is insightful & infectious! Way to go!

  • @aznative_
    @aznative_ 4 роки тому

    Mad Skills all the way around. Mechanic skills on point narrating on point editing on point and most importantly camera angle on point.

  • @alfredposey
    @alfredposey 3 роки тому +1

    For my 2018 2.5i outback I had to remove the driver side wheel to get to the two battery tray bolts on the side from underneath. I had to remove the belly pan and raise the engine jacking under the oil pan to get the driver side rear coil and plug out. Must use a wobbly socket on the plugs. Used a hose to screw plugs in and lift them out.

  • @3M0710N
    @3M0710N Рік тому

    Thank you so much. Just bought a flat 6 outback and heard already cylinder 6 is the hardest to get to

  • @toytech468
    @toytech468 6 років тому +3

    Awesome and informative 2-part video! I bet a lot of people don’t know that trick with the universal, great job! 👍🏼

    • @FayeHadley
      @FayeHadley  6 років тому +1

      Warren Higaki why thank you so much for the positive feedback! 😊

  • @Fanofyout
    @Fanofyout 5 років тому +1

    Tried to do this today and it was tough. You made it look easy.

  • @apk29
    @apk29 2 роки тому +1

    @3:15 down is the answer. Thanks for this!

  • @alphaomegaambassador4978
    @alphaomegaambassador4978 Рік тому

    Couldn't figure out how to get the driver's side rear coil out until I watched your video. Down was the answer. Thank you.

  • @spacecalander
    @spacecalander 3 роки тому

    Thanks!

  • @XJ1100J
    @XJ1100J 3 роки тому

    Firstly, you are awesome. 2ndly, thanks for the demo, my car is a 3.0L but the connectors are the same. Thanks for the clear head's up how to do. You may have saved me from having a bad day. Have fun :)

  • @DougKremer
    @DougKremer 4 роки тому +1

    Excellent work, small and nimble fingers are certainly an asset here! I noticed but you did not mention the nice dollop of fresh silicone grease inside the plug boots on the coil packs. A+

  • @sc230mb
    @sc230mb Рік тому

    Thanks for the insight. Going to tackle this when the parts arrive on a 2014 Tribeca. You have a gift of making hard things easy.

  • @thepittsstop4540
    @thepittsstop4540 6 років тому +1

    Great camera work! Thanks for taking the time to get the great shots and angles! Has to double your work time!! Not that you charge for it! Lol!! Great job, Faye!!

    • @FayeHadley
      @FayeHadley  6 років тому +1

      ThePittsStop very true! It typically takes me twice as long, and the customer still pays the same rate! (But hey! Maybe someday UA-cam will pay me?!?) But I actually really enjoy making the videos! I'm so glad you liked this one!

  • @williamdyckman9704
    @williamdyckman9704 3 роки тому +1

    Thank You, have to do on my daughter's car. Your explanations and camera shots were excellent!!

  • @mr.nobody9630
    @mr.nobody9630 6 років тому

    I do not owned a Subaru but is super interesting in how other cars are designed. Thanks for the video Faye

  • @Santi_fernandez-_-
    @Santi_fernandez-_- 6 років тому +2

    You should be on velocity channel with your own show. Very cute too.

    • @FayeHadley
      @FayeHadley  6 років тому

      Well thank you!! That would be a dream, but I think I might be a little too shy to go it solo 😅 it's totally different when it's just me talking to my phone!

  • @redhauscreator146
    @redhauscreator146 4 роки тому +1

    Here's hoping this works for my 2017. Thanks for the well done camera angles.

  • @alnewell31
    @alnewell31 2 роки тому

    Again ! Fantastic camera and editing, thanks so much !

  • @marshallever7474
    @marshallever7474 Рік тому

    My knuckels are all messed up now. I still need to change #6 which is probably one of the harder ones. I changed plugs and coils - took a lot of time for me. But i need to re-watch to see how you got out the #6 cylinder on the drivers side.

  • @jeffjensen4132
    @jeffjensen4132 6 років тому +2

    Great videos...probably among the best I have seen. Thank you for making time to do these.

    • @FayeHadley
      @FayeHadley  6 років тому

      Thank you so much for your comment! I worked really hard on this one, so I am so glad that the effort was worth it! :)

  • @jacklisiecki2389
    @jacklisiecki2389 5 років тому +1

    Great camera work and an excellent "how-to." Thank you Faye!

  • @scottmccracken8177
    @scottmccracken8177 6 років тому +1

    I’m getting ready to do this to my 2010 3.6R. Awesome video! You’ve gained a subscriber.

    • @FayeHadley
      @FayeHadley  6 років тому

      Scott McCracken thank you so much! I'm so glad it was helpful to you!

    • @jackacres3936
      @jackacres3936 3 роки тому

      Me too, Many Thanks from New Zealand!

  • @Mr2pint
    @Mr2pint 6 років тому +1

    Nice work didn't look too difficult certainly not as bad as a transverse v6 Toyota.

  • @jimhamilton3544
    @jimhamilton3544 4 роки тому +2

    Faye, excelent camera work and very good video thank you

  • @hardcorebills100
    @hardcorebills100 3 роки тому

    Thanks a ton for the video, and you made it entertaining as well 😁. I needed this to see what I'm getting into, because my dealer decided to become a pusher for snake oil.

  • @smoky22
    @smoky22 3 роки тому +1

    Thanks heaps mate for this. Not much difference on the left hand side driver version. Pretty much equaled your 3hr time thanks to your tips. Legend!

    • @FayeHadley
      @FayeHadley  3 роки тому

      Killer job!!!!! This one can get a little frustrating!!

  • @walterk1221
    @walterk1221 6 років тому

    I enjoy your narration as you proceed. Your skill is undeniable. The only thing that made me uncomfortable was that you didn't use a fender protector (unless your shirt is super soft; I did notice it was untucked).

  • @marshallever7474
    @marshallever7474 Рік тому

    I have a 2012 and there is really no clearance - my hands are pretty small, but dang, I can't get in there like you are gettin in. It took me around 4 hours to change 5 of them, still have one to go and that is the back drivers side. the main one I needed to get was cylinder 5 - so my car runs good now. I'''ll pickup a universal tomorrow.

  • @Michel-ws3lr
    @Michel-ws3lr Рік тому +1

    Excellent video, I performed the job on mi 2015 outback 3.6l and I managed all in a record time. Thank you very much.
    Now I have to change the 14165AA091 engine Coolant Crossover Pipe.
    Could you help me? Do you have a video for this job? I'm from Montreal Canada
    Thank you very much for your collaboration.

  • @GustyCrosswinds
    @GustyCrosswinds Місяць тому

    did you need to do a relearn procedure after having the battery out? thanks for the vid

  • @adamcallahan3418
    @adamcallahan3418 5 років тому

    You can try and removing the motor mount nut off the bottom side and jacking the motor up a bit to tilt the engine to access those plugs a bit easier

    • @bbodan5393
      @bbodan5393 4 роки тому

      I think she wouldn't be posting a "how to" video if it involved using an engine jack... most of us don't keep one for the routine car maintenance. They are NEEDED if you want to do the rocker cover gaskets... or a 4 point lift.

  • @snowydrift
    @snowydrift 6 років тому +2

    What a wonderful girl!! A great and informative set of vids - you explained It all very well Faye. I have here in Australia a 3.0R that is just as tight for room. Yes, I sat and looked for a long time considering 'down' or 'up'. Its not done yet. Just as well I have the same tools as you, even smaller, so should do the trick. I could do with your small hands though. Thanks a million.kind regards, take care. Roger Royal

  • @eltonvazquez619
    @eltonvazquez619 Рік тому

    I want to thank you for your help you are awesome I would love to have you by my side I'm almost done with my Subaru it's 2003 a little different having a hell of a time taking them spark almost feel like taking my torch out and cutting up the frame I'll get it sooner or later I wish you were here to do it for me but thank you you are awesome

  • @billydawespony4687
    @billydawespony4687 Рік тому

    Awesome thanks I needed a very straight forward method. Thanks!!

  • @hercao5526
    @hercao5526 6 років тому +2

    Thanks a lot for the vídeo Faye ;) It helps a lot of People for sure! I will do it on my Legacy 2.5 and hope to have success too :) Greetings from Brazil !!!

  • @percywheeler
    @percywheeler 4 роки тому

    Excellent job, this couldn’t have been explained any better, thank you

  • @mikem6009
    @mikem6009 2 роки тому

    Great video dude. I appreciate this so much

  • @ed9095
    @ed9095 Рік тому

    I'm going to tackle this job in a couple of weeks on my 2015 3.6 and appreciate your video. I've read that some don't remove the electrical connector but instead just remove the 10mm (or is it 12mm) bolt and allow the assembly to hang while removing the plugs. Wondering if you’ve tried this or have thoughts on this approach.
    Also, do you replace the rubber boots during the process? Thanks!

  • @Chuck5099
    @Chuck5099 4 роки тому +1

    Love the Texas sounds wind, cicadas, doves, and mockingbirds in defense mode. 😁

  • @JnJShiffler
    @JnJShiffler 8 місяців тому

    thanks. Working on a co-workers 2006 Tribeca. Fixed her starter, braided cable fell apart, but motor may be seized. Need to get plugs out to spray some oil in to hopefully free up. Has been sitting a while. Got a breaker bar on the crank shaft , can't budge. A druggie friend of daughter stole the keys and kept for 2 weeks and left roadside. She's so strapped for $$. Faye your name or do you identify as Faye? We are Ren Faire loving Fae Folk our selves. My Green Witch partner is an awesome NATIVE plant educator in her spare time.

  • @rbspider
    @rbspider 5 років тому

    I love your work - You are the best - something I noticed in this video where I would like to offer a suggestion . I always take my belt off when working on cars and would use a fender cover when working under the hood. I would hate to scratch a new car while working under the hood even if its an older car like Giya One thing I have learned . Even when you do everything to avoid damage it can happen .What do you think

  • @my1little2pony
    @my1little2pony 2 місяці тому

    tihs video helped alot but all you need is a spark plug socket and a 3 inch extension. small hands help

  • @alexapavao7158
    @alexapavao7158 6 років тому +1

    So you need to remove the battery - is that a memory saver device I see? Presumably you need a memory saver to prevent computer loss settings, right?

    • @FayeHadley
      @FayeHadley  6 років тому +2

      You don't *have* to, but it makes it so much easier. And it isn't a memory saver, (most newer vehicle have that function built in actually!!) it's some funky device that makes your battery last longer.... 🤔 I removed everything and the clock didn't even need to be reset!

    • @alexapavao7158
      @alexapavao7158 6 років тому

      @@FayeHadley solid! Thank you!

  • @altlandf
    @altlandf 5 років тому +1

    Faye just how do you do this and stay so calm? Ever do a 95 Lebaron convertable timing belt on a 3 liter V6? Took me 3 months because I wasn't putting tentioner on right. There's a reason the oil pump has pin hanging out of it.

  • @lifeisgood070
    @lifeisgood070 4 роки тому

    Got a video one the 2017 (5th gen) outback 3.6R transmission flush? TR690? I can drain /fill, but I kinda wanted to pump out via the cooler. I'm like 50/50 on taking off the cooler hoses near the front of the car on the mini transmission cooler. Not sure what fluid is in there, if it is cvt or coolant and already exchanged. Hence my hesitation.

  • @nmanglallan
    @nmanglallan 4 роки тому +1

    This helped so so much. Thank you for everything!

  • @HadesunderworlDomain
    @HadesunderworlDomain 6 років тому +1

    Wow little skilled hands there great for Subaru boxer engine work you are rarer then wooden rocking horse ***t keep up the great work on videos

  • @kennywowie
    @kennywowie 5 років тому

    super clear, wish I had that vehicle but I don't. I'd love to see you do this on a 1999 Subaru Legacy Outback. Selfish me.

  • @mikeholt3545
    @mikeholt3545 6 років тому

    Great video faye keep it up!

  • @ThePanred
    @ThePanred 6 років тому +1

    Nice. Do you have an oil change diy for 3.6r legacy or is it pretty much the same? Great info going to change the sparks today

    • @FayeHadley
      @FayeHadley  6 років тому

      MixedBag I do not have an oil change video for this vehicle, but I actually change the oil the same time I did this service and it was nothing special at all. The oil filter and the oil drain plug are in almost identical locations, you should have no trouble!!

    • @ikeperez3922
      @ikeperez3922 4 роки тому

      @@FayeHadley 7 quarts of oil! I forgot to check specs before I purchase normal 5 quarts. LOL

  • @senioraces
    @senioraces 4 роки тому

    Hi Faye, thanks for the video! my question is, how long did this job take to do?

  • @happyalaskanguyj4052
    @happyalaskanguyj4052 4 роки тому

    I love watching your videos they or helpful when I work.on cars

  • @cuongandmari
    @cuongandmari 4 роки тому +9

    The location of the spark plug is beyond belief. The engineers must be drunk when they designed this.

  • @qualityreno9689
    @qualityreno9689 3 місяці тому

    great video. thanks. However, I wouldn't want to do a head gasket job on this engine!

  • @OmarEldasher
    @OmarEldasher 6 років тому +1

    Wow, great video. Saving me a boatload compared to having the dealer do it.
    Quick question: do you recommend antiseize for the plug threads?

    • @FayeHadley
      @FayeHadley  6 років тому +1

      I usually do, but just very very little. I see anti seize lathered on in excess all the time, and that can actually do more harm than good. Just a super light application that doesn't touch the top two threads.

  • @sik05civic
    @sik05civic 11 місяців тому

    If I had a lift would it make the task easier?

  • @theaberrantdon
    @theaberrantdon 2 роки тому

    Thanks for the practical video with practical tools. Some of these videos are just way too long.

  • @montefiveforty1
    @montefiveforty1 6 років тому +1

    Way easier if you remove the motor mount nut and jack the engine up one side at a time.Just a tip.

    • @FayeHadley
      @FayeHadley  6 років тому +1

      Thank you for the feedback! As I stated in this video, having small hands helps quite a bit. If you watched my video, you'll see I had no issues performing this job without taking the extra step that you are recommending, and time is money! This is a good tip for someone without the tooling that I have, or someone with big hands or big arms. Thanks for the comment!

  • @Emseamotorsports
    @Emseamotorsports 4 роки тому +1

    Great video, in my book.

  • @americanpancakelive
    @americanpancakelive Рік тому

    Faye, do you know if this would apply to a 2006 Tribeca B9?? I just ask because today I did the passenger side from underneath the vehicle and it was a nightmare, ha-- doing the drivers side tomorrow and wondering if from up top might be better.

  • @colinhartung1953
    @colinhartung1953 5 років тому

    I have a 2016 3.6R outback. Before I remove the battery, can I get away without using a battery memory saver or should I get one?

  • @jimmyc5438
    @jimmyc5438 5 років тому

    Not sure here, but what happens to plugs when you keep them in past their service interval? If the car doesn't burn oil, or run rich to foul the plug, why change them? Just curious.

  • @chandlersgarage
    @chandlersgarage 3 роки тому

    Thank you Faye for these very informative videos. I am about to change the plugs on a 2016 Outback 3.6L. I do have a lift, do you think it will be an easier job from the bottom? Trying to use the lift for everything to justify the cost to my wife. ;) LOL

  • @scormier239
    @scormier239 2 роки тому

    @Faye Hadley would this be easier (I have the 2015 Outback 3.6) from under the car?

  • @ოთოოთო-ჟ5ქ
    @ოთოოთო-ჟ5ქ 4 роки тому

    which size is spark plug diameter ?

  • @cesareomiranda4485
    @cesareomiranda4485 2 роки тому

    Thank you for the insight, 😁👍

  • @waltp3373
    @waltp3373 4 роки тому

    So if the dealer charges $399, how much did you charge?

  • @DonStAubin-hu6wq
    @DonStAubin-hu6wq 4 роки тому +1

    WOW!! No blood and no dropped bolts!

  • @thomasross8400
    @thomasross8400 2 роки тому

    Great job…thanks

  • @michaelrouw2117
    @michaelrouw2117 4 роки тому

    Can’t help but think it would be easier coming up from underneath.??

    • @FayeHadley
      @FayeHadley  4 роки тому

      If you're on a lift, yes!! If I'm a driveway on the ground, nooooooo

  • @iangreene2063
    @iangreene2063 5 років тому

    I think you'll find working from the bottom easier.

  • @nicolaishapoval9185
    @nicolaishapoval9185 6 років тому

    Much rather watch a goog looking woman wrenching on vehicles than men! Keep on with awesome videos

  • @wickertwm
    @wickertwm 4 роки тому +1

    Do you think the Engineers really care about service. Wouldn't a head gasket be absolute Hell

  • @ramzo1538
    @ramzo1538 3 роки тому

    So jealous of your small hands😂😂😂

  • @raystafarifpv4951
    @raystafarifpv4951 4 роки тому

    omg marry me. you made my life easy