Easy? Not for a novice like me. I found it very confusing especially at the end when he glossed over so much. PS why haven't you answered the questions people have asked below?
You probabaly have multiple stations set up, maybe not. Possibly the front is A and the bsack is B. Within those areas you may have multiple stations. Thus, you could water roses and flowers evry day or every other day but trees maybe twice a week if they are on different stations, ie A1, A2, A3 myabe the bask is B2, B1. Hope that helps. Cheers!
Thank you for demonstrating but not clear on the following. If you press enter manual and leave it on 'All' does it go through each program one after the other? and after manually finishing does it automatically return to the set program? Thanks
Due to low pressure in our well. Some stations don’t have enough pressure to push the sprinkler head out. Is there any way I can program the system to run station 1 and 2 then rest for 10 minutes and start station 3 and 4 and so on.
My landscaper set it for me. I went out to check it after he left and the clock was flashing between the current time and "next start". Why is it flashing? It is set in the "RUN" position.
Mine has been programmed and operational for a couple of years. Then the letter P came up onto controls, so everything is stopped (Parked?) How do I get rid of this and allow watering to occur again?
Why when I run the program manually it doesn’t apply the “programmed time”!! It’s programmed to run 30 minutes for each station but actually it runs for 5 or 10 minutes when run manually.
If I program the hydro rain on a Tuesday to go off every 3 days , will it go off the next day ( Wednesday), then 3-days after etc.Or will it go off 3 days from Tuesday ( which would be Friday)?
Ed, hen you program it you willm see the days of the week in small (I need my readers) letter and you can add or deete them by cycling through the, with the far right arrow. Add the day with the plus button or do nothing and it will go on to the next day. The minus sign button will delete s day once yo9u have cycled over to it. Hope thst helps. I'm still learning too. Cheers!
Can you please tell me why my system runs for almost 4 hours when I've only set the stations for 10 minutes, and have 8 zones? We've opted to just dry out our yard rather than run it because of this problem. Please help!
Just what I needed to see for this house we rented. Thanks!
Thank you, sir!😊
Thanks for sharing
This is an excellent tutorial. Thank you!
Easy? Not for a novice like me. I found it very confusing especially at the end when he glossed over so much.
PS why haven't you answered the questions people have asked below?
You're a legend. Thanks
Thank you , made it easy !
Oh Man thanks to you also UA-cam
It would have been nice if he would have explained what Program A1, A2, A3, etc., was as opposed to Program B1, B2 etc.
You probabaly have multiple stations set up, maybe not. Possibly the front is A and the bsack is B. Within those areas you may have multiple stations. Thus, you could water roses and flowers evry day or every other day but trees maybe twice a week if they are on different stations, ie A1, A2, A3 myabe the bask is B2, B1. Hope that helps. Cheers!
I programmed everything successful. Can you tell me why my machine is flashing between the next start time and the time it is now?
This is happening to me too. Did this cause any problems for you?
Thank you for demonstrating but not clear on the following. If you press enter manual and leave it on 'All' does it go through each program one after the other? and after manually finishing does it automatically return to the set program? Thanks
How to program it to run twice a day? Is it by using and programmming a ‘B’ program?
Due to low pressure in our well. Some stations don’t have enough pressure to push the sprinkler head out. Is there any way I can program the system to run station 1 and 2 then rest for 10 minutes and start station 3 and 4 and so on.
My landscaper set it for me. I went out to check it after he left and the clock was flashing between the current time and "next start". Why is it flashing? It is set in the "RUN" position.
my timer goes on but after 3 minutes default program shows up and auto goes to next station
General programming was a good video. I need to set 4 start times each day because we just planted a new lawn. The video only showed us 1 start time.
Mine has been programmed and operational for a couple of years. Then the letter P came up onto controls, so everything is stopped (Parked?) How do I get rid of this and allow watering to occur again?
What ac power cord do? My system is still runs without the cord plugged in.
Why when I run the program manually it doesn’t apply the “programmed time”!!
It’s programmed to run 30 minutes for each station but actually it runs for 5 or 10 minutes when run manually.
If I program the hydro rain on a Tuesday to go off every 3 days , will it go off the next day ( Wednesday), then 3-days after etc.Or will it go off 3 days from Tuesday ( which would be Friday)?
Ed, hen you program it you willm see the days of the week in small (I need my readers) letter and you can add or deete them by cycling through the, with the far right arrow. Add the day with the plus button or do nothing and it will go on to the next day. The minus sign button will delete s day once yo9u have cycled over to it. Hope thst helps. I'm still learning too. Cheers!
Where is the battery located?
You didn’t address the test mode!!
My Hidro Rain control will not turn on, it's set to run, anybody can tell me why it's not running? Thanks
what does no ac mean? No power?
Great video... my screen says no ac on it... any idea how to fix that??
Hydro Rain HRC 100 Programing
Can you please tell me why my system runs for almost 4 hours when I've only set the stations for 10 minutes, and have 8 zones? We've opted to just dry out our yard rather than run it because of this problem. Please help!
Alicia Lott Do you have two start times?
We only have one start time for each zone but ours also runs 4+ hours a day
How do you turn a zone off. Time will not set to zero
you have to use the "clear" button.
can i bypass a zone?
Just don't program it to come on on a day you dont want or set the time to zero. HOpe that helps a little! Cheers!
Dont you love these tutorials where they tell you how simple it is. IT IS NOT!!!!!
audio is way too quiet
I can see a lack of follow up. Got paid for the video and turned around? 😂
Thanks for sharing