do you need this battery ? if you need , you could see the below link: www.aliexpress.com/store/product/2017-SKT-New-Arrived-Rc-Lipo-Battery-2S-7-4V-2700mah-20C-Max-30C-for-Wltoys/2782033_32811154001.html?spm=2114.12010612.0.0.51c21598OvD4uN
This is the best unboxing I have ever seen it’s basically how I would do it I wouldn’t talk I will just put up notes like you did and they’re not tiny like some people you made them large enough to read on a small screen I also like that you took off the body and showed everything else including taking it apart to find out why it was so loose and then fixed it on screen even showed the instruction manual did I mention how this is the best unboxing I’ve ever seen
Thks for your comment, i'm glad you like it. I almost always try to take appart cars on video to show how it is inside. This is the kind of information i want to know before buying a car.
Just bought mine but the polaris version. My first RC. I Immediately check on the gearbox for a missing bearing. What I did not expect is, all of the gearing are metal. I just need to put on some grease. Not sure why mine came with metal gears. Thanks for the very detail review. Really help me a lot on learning about this rc. What's not good about this rc is the electronic. Just bash mine for the first time and the steering servo already shows sign of damage.
hello Switch I´ve the 10428a and how can I configure the ABS on the transmiter and what is that numbers on the top of the servo? Thanks for your excelent review
This is the most detailed video of the 10428, I noticed that the aux trim and and aux DR on the transmitter are not working on mine. I trimmed the shifting servo to stop pushing because it was keeping to make noise once 2ng gear is engaged, now it seems to work ok but it heats a lot.
The little squared buttons for aux trim and aux DR on the side of the transmitter does nothing, the ones for the steering and throttle trim work nice. The shifting button engages the gears perfectly once I set through the EPA or trim on the display, I fixed my servo shifting issues setting the values written by hand on the top sticker, mine was 52% EPA, -4 trim for 3 channel. I think this should be warned on the manual or the shifting servo will get burnt or stripped. You can hear your own servo at 11:50 making noise and it should be quiet once you stop changing the speed.
with the TX do you know how many models can be put in the model memory and which receivers will it bind too, being WLtoys I am guessing it might be one of the flysky protocols, thanks :)
thanks for replying much appreciated you say it wont bind with all flysky receivers which flysky receivers will it bind too ? ( model number would be great ) I think there are two protocols used, could be more im not sure thanks again for taking the time to check and reply
If you talk about the front wheel which left the ground it is the caractéristic of rear solid axle, the torque make the front wheel left the ground. OUt of a rear sway bar it is pretty hard to stop this behaviour.
I have visited the Ebay page, with the purpose of buying one, but I am disturbed by the fact that it says it says it speaks of two categories of carts, some originals, and other Chinese. Which of the two do you recommend? Please. Thank you
The vaterra tiwn hammer is made is better material, but really more expensive than this one. The WLotys doesn't have the best electronic and you will maybe need to change everything at a moment.
We can always do lot of things by tinkering. But what is important to know is that this roll cage is less wide than a SCT body and the angles on this rollcage aren't same as sct body.
Hi, sorry for commenting this late, but: I just bought this model and all the gearing does not sound nice; do you recommend to dissasemble the gearbox and diffs and grease them? Thanks
@@NobodyNoWhereElse Thanks, I tried to dissasemble the gearbox, but I couldn't undo neaither of the grub screws on the drive shaft....they are BAKED in....stripped both...did you hae any troubles also? Thanks
@@NobodyNoWhereElse Hi, I was in fact heating them, but to no avail (I ended even using impact wrench, nothin'). I now ended up drilling a couple of 2mm holes in the top of the gearbox and injectiong grease through them, then plugging them with grub screws (so that the servo can lay flat on top). I'm telling you: eveything sound SOO MUCH smoother and quieter now! Before there was even some squeking and grinding to be heard, like metal on metal, when runing on idle....horrible. Do you have any idea, why the factory doesn't lube gears, it can't be costs? (premature wear I suppose, to sell parts...). Well thank you again for your time and selfless help!
@@putimir Chinese products are far to be perfect. Most of the chinese products come with grease on gears, why this one doesn't have, i can't tell. And in comparison, the first corally (which is a known EU brand) 1/8 did come with a little amount of grease only in the diff.. Arrma, the exb kraton, did come with a very low amount of fluid in the diff.. The hobbyking sabertooth did come with a low amount of grease in the diff. too, which make the plastic diff. case melting when we used it if we didn't put fluid instead of grease.
I can't tell if it is trully a 1/9, but it is bigger than a 1/10 buggy and almost as long as a 1/8 buggy. There is more details in my review, the link is below the video.
I'm pretty sure this would destroy the spur gear and maybe all plastic gear in gearbox. Plus, the car would had made very bad gearing's noise. Gearing's mesh is very important, without ball bearing it isn't good at all.
Ok where is the crawling test? I run this Truck for 2 years and for the money its pretty though,fast and a capabel trail truck.,ok i break some parts but thats my fail (extreme rock crawling and submerged crawling).
I just got mine today and very disappointed. I ordered the one with leds and got no lights on it. After the battery charged I tested And something wrong with Centre diff not spinning front or rear shafts. Any ideas?
The 10428 never has light. And the 10428/Twin hammer doesn't have center diff. Are you talking about the 2 speeds? Check the parameter on the transmitter on the channel 3/aux. Maybe the gears aren't engaged. If you don't manage to make it work, do a video and post it on my review on rcgroups, the link is below the vieo, we, me and others users, will help you.
Switch Off When Not In Use it says wltoys 10428 with LED LIGHT on description on banggood. Yes it is a 2 speed and I'm sure I can figure out the problem but don't want to mess with until I speak to banggood
yes there is a mistake on the banggood page about the light. You can already try to check the transmitter parameter to see if it is a gear shift porblem.
Switch Off When Not In Use ya it's either the shifter or set screw on motor/pinion from the sounds of it. It's just when I order rtr I should get rtr or I would pay an extra 20$ and get twin hammers kit instead. Thanks for your input
but with ur unboxing it needs 6 batteries? but on the online market which im planning to buy it says it only needs 4? just confused, i dont wanna get scammed..tnx
You're right, i done a mistake, this transmitter use 6 batteries. Maybe the webshop you are talking about done the same mistake or it isn't exactly the same car. The 10428, A333 (there are two differents cars Wltoys A333 also), and K949 are same, the 10428-C2 or B2 aren't same.
Switch Off When Not In Use hi man i have a question, the front differential of the 10428 are in metal right? Are of the same size of the 12428? Could it be used for an upgrade on the 12428? Last question, do you no if one of these two cars does have differential good for wltoys 12402/404?
Merci. Non pas en français, c'est de plus en plus rare les mode d'emploi en français. Mais il est facile de comprendre comment le tranmetteur fonctionne, au pire on peut trouver des réponses sur internet car les fonctionnalités sont des fonctionnalités courante aux transmetteurs.
This is the receiver i received. Take a look on the banggood product page (link below the video), you will see the same Tx. This car has come with this transmitter during a long time. Maybe WLtoys sell this car with a different transmitter, i can't tell, i'm not a WLtoys employe or even a banggood employe, i'm a rc user. Maybe you haven't bought the exact same car, there is some models based on the same chassis. In all my videos i show exactly what i receive, not like many reviewers/sellers who describe products like something awesome or marvelous almost every time. Under each my videos there is a link to my review, you can take a look for more information.
I don't spaek english well enough. Also : ball bearing : en.wikipedia.org/wiki/Ball_bearing , ball race : en.wikipedia.org/wiki/Race_(bearing) ? So i talk about a ball bearing and not a ball race ;)
Thanks for the honest review/unboxing/confirmation. Just as I assumed..... junk. The name says it all wl TOYS. You get what you pay for like most everything in life!
It isn't as junk as you think. Sure there is a missing ball bearing but for the price it is a good car. Many user are happy with this chassis, same chassis than K929, A333. I stay honest and show what can happen in real life in my videos, not like many "advertise" videos of reviewers who more like to show themself than the car but who also have many suscribers because their videos are atractive.
rc Ohio I own quite a few Wltoys rc cars most came with everything working and are still in working condition but there is some lemons as well as long as you don't mind what you're paying for. The price ratio vs quality and performance is beyond superb
I disagree with the below comment,I turned it off after 30/40 seconds coz there was NO TALKING,It would be a million times better if you described what you saw n your reaction to seeing it.this version BIG THUMBS DOWN.SORRY.
Most of the time i don't care about comments in videos, they are often biased, i prefer only show what you can expect and make your own opinion from what you see and not what you hear. If you don't want to watch more, you do as you want, but don't be surprised if you find à missing part on this car.
Even though no dialogue at least no annoying background music and still was good to watch
Incredibly detailed video. Thanks. This helped me on my 10428a
Thks, glad you like.
Super car 🚗
Exactement...demain je vais peut-être avoir la réponse pourquoi les vitesses sautent sur mon 10428👍
GREAT VIDEO. VERY INFORMATIVE AND HELPFUL. SPECIAL THE MISSING BEARING THE CASE. THANK YOU FOR BEING SO THROUGH WITH YOUR REVIEW.
do you need this battery ? if you need , you could see the below link:
www.aliexpress.com/store/product/2017-SKT-New-Arrived-Rc-Lipo-Battery-2S-7-4V-2700mah-20C-Max-30C-for-Wltoys/2782033_32811154001.html?spm=2114.12010612.0.0.51c21598OvD4uN
This is the best unboxing I have ever seen it’s basically how I would do it I wouldn’t talk I will just put up notes like you did and they’re not tiny like some people you made them large enough to read on a small screen I also like that you took off the body and showed everything else including taking it apart to find out why it was so loose and then fixed it on screen even showed the instruction manual did I mention how this is the best unboxing I’ve ever seen
Thks for your comment, i'm glad you like it. I almost always try to take appart cars on video to show how it is inside. This is the kind of information i want to know before buying a car.
Tj6g
Just bought mine but the polaris version. My first RC. I Immediately check on the gearbox for a missing bearing. What I did not expect is, all of the gearing are metal. I just need to put on some grease. Not sure why mine came with metal gears.
Thanks for the very detail review. Really help me a lot on learning about this rc.
What's not good about this rc is the electronic. Just bash mine for the first time and the steering servo already shows sign of damage.
Great review Very detailed and helpful Question Will that transmitter Bind to multiple rigs?
Excellent video!!! Keep going
Thks for your comment. I'm glad you like it.
Awesome video. Made my decision to buy one very easy. Hope to see more i boxing videos from you in the future!!
Thanks, glad you like. I done many others unboxing since this car. You can also read my reviews, the link is always under all my videos.
hello Switch I´ve the 10428a and how can I configure the ABS on the transmiter and what is that numbers on the top of the servo? Thanks for your excelent review
Oh cool thx for the review you da boss cause you now de way
This is the most detailed video of the 10428, I noticed that the aux trim and and aux DR on the transmitter are not working on mine. I trimmed the shifting servo to stop pushing because it was keeping to make noise once 2ng gear is engaged, now it seems to work ok but it heats a lot.
Thanks, glad you like.
You mean that your servo to change the speed doesn't move when you adjust the value on the AUX channel?
The little squared buttons for aux trim and aux DR on the side of the transmitter does nothing, the ones for the steering and throttle trim work nice. The shifting button engages the gears perfectly once I set through the EPA or trim on the display, I fixed my servo shifting issues setting the values written by hand on the top sticker, mine was 52% EPA, -4 trim for 3 channel. I think this should be warned on the manual or the shifting servo will get burnt or stripped. You can hear your own servo at 11:50 making noise and it should be quiet once you stop changing the speed.
Great video, thank you! How do you swith between Speed 1 and Speed 2?
There is a switch on the left of the steering wheel
Is there a better battery I could buy for longer run time for my wltoys 10428 that will be better than the one that comes with car .thank you
oh cool
with the TX do you know how many models can be put in the model memory and which receivers will it bind too, being WLtoys I am guessing it might be one of the flysky protocols,
thanks :)
Tx can memorise 5 differents models. But i can't bind it with all the FlySky reveiver i have.
thanks for replying much appreciated
you say it wont bind with all flysky receivers
which flysky receivers will it bind too ? ( model number would be great )
I think there are two protocols used, could be more im not sure
thanks again for taking the time to check and reply
GR3E, GT2R, GT2E, i have a gt2 and gt2e, two differents protocol, one of them can't bind all the receiver also.
thank you very much :)
This car has a great performance but my model is tilting to the left .Is this the rear shocks or the front end that needs adjustment ?
If you talk about the front wheel which left the ground it is the caractéristic of rear solid axle, the torque make the front wheel left the ground. OUt of a rear sway bar it is pretty hard to stop this behaviour.
I am getting one
I have visited the Ebay page, with the purpose of buying one, but I am disturbed by the fact that it says it says it speaks of two categories of carts, some originals, and other Chinese. Which of the two do you recommend? Please. Thank you
The vaterra tiwn hammer is made is better material, but really more expensive than this one. The WLotys doesn't have the best electronic and you will maybe need to change everything at a moment.
Can you fit the cage under a short course truck body to simulate an internal roll cage?
We can always do lot of things by tinkering. But what is important to know is that this roll cage is less wide than a SCT body and the angles on this rollcage aren't same as sct body.
I thought it was smaller. Gota find something else, thank you!
Hi, sorry for commenting this late, but: I just bought this model and all the gearing does not sound nice; do you recommend to dissasemble the gearbox and diffs and grease them? Thanks
Yes, you can add grease and also check if the shifting system is well adjusted.
@@NobodyNoWhereElse Thanks, I tried to dissasemble the gearbox, but I couldn't undo neaither of the grub screws on the drive shaft....they are BAKED in....stripped both...did you hae any troubles also? Thanks
@@putimir Wltoys put too much thread locker, as arrma ^^. Before unscrew heat them a lot.
@@NobodyNoWhereElse Hi, I was in fact heating them, but to no avail (I ended even using impact wrench, nothin').
I now ended up drilling a couple of 2mm holes in the top of the gearbox and injectiong grease through them, then plugging them with grub screws (so that the servo can lay flat on top).
I'm telling you: eveything sound SOO MUCH smoother and quieter now! Before there was even some squeking and grinding to be heard, like metal on metal, when runing on idle....horrible.
Do you have any idea, why the factory doesn't lube gears, it can't be costs? (premature wear I suppose, to sell parts...).
Well thank you again for your time and selfless help!
@@putimir Chinese products are far to be perfect. Most of the chinese products come with grease on gears, why this one doesn't have, i can't tell. And in comparison, the first corally (which is a known EU brand) 1/8 did come with a little amount of grease only in the diff.. Arrma, the exb kraton, did come with a very low amount of fluid in the diff.. The hobbyking sabertooth did come with a low amount of grease in the diff. too, which make the plastic diff. case melting when we used it if we didn't put fluid instead of grease.
Do you know where to buy spare parts for this crawler?
Are there any compatible models out there?
You can find some parts on aliexpress. It is a vaterra twin hammer copy so parts are compatible with this car.
Very nice, thank you. Just ordered it at GB. Looks like great value for the money.
If I buy two can I race them or one remote control will interfere with the signal of the other car?
Normaly no, you can use two in same time.
the lack of this bearing is in every copy or only in yours?
It is only mine because no others owners have mentionned this in the thread i opened on rcgroups, the link is below the video.
it is awsome
Premlata Murmu IIove
Hello, I'm looking for the complete user manual provided with the rc car because I didn't receive it. Where can I download it?
If it is for the assembly, you can use the Vaterra twin hammer manual, same chassis : www.horizonhobby.com/pdf/VTR03001_Manual.pdf
Nice video. Is it water resistant?
No, not really water resistant.
Nice video, so are you basically saying it’s a 1/9 scale bro?
I can't tell if it is trully a 1/9, but it is bigger than a 1/10 buggy and almost as long as a 1/8 buggy. There is more details in my review, the link is below the video.
What had happened if you had driven it without that Ball Bearing you replaced?
I'm pretty sure this would destroy the spur gear and maybe all plastic gear in gearbox. Plus, the car would had made very bad gearing's noise. Gearing's mesh is very important, without ball bearing it isn't good at all.
Thanks for that fast answer :)
Ok where is the crawling test? I run this Truck for 2 years and for the money its pretty though,fast and a capabel trail truck.,ok i break some parts but thats my fail (extreme rock crawling and submerged crawling).
889+👌=900
Tnx for the video ...
Thks for your comment and like, i'm glad you like it.
can I use a 3s battery on this car with 11.1v ?
or I will damage the electronics? ??
imo this will damage electronic.
Hey guys, what brushless water proof motor kit could to buy to increase the speed of this rc car?
What do you recommend?
Thanks
3650 3300kv 60A esc should be nice.
If now goes about 20 kph, what would you expect with that motor swap? Would i only need the motor or also the other components?
Imo close to 45km/h. You will maybe need motor pinions.
Friend, which of the two is the best?
I guess you talk about the 12428 vs 10428? The 10428 is far better than the 12428.
I have the feiyue desert eagle it is 1/12 but is pretty good I think
The Feiyue isn't bad, but the 10428/twin hammer is better.
Is this a good car to buy
Just liked and subscribed,Excellent video,even with the subtitles :)
Thanks, glad you like.
Little breathing asmr but great job man
Is it waterproof
I just got mine today and very disappointed. I ordered the one with leds and got no lights on it.
After the battery charged I tested
And something wrong with Centre diff not spinning front or rear shafts.
Any ideas?
The 10428 never has light. And the 10428/Twin hammer doesn't have center diff.
Are you talking about the 2 speeds? Check the parameter on the transmitter on the channel 3/aux. Maybe the gears aren't engaged.
If you don't manage to make it work, do a video and post it on my review on rcgroups, the link is below the vieo, we, me and others users, will help you.
Switch Off When Not In Use it says wltoys 10428 with LED LIGHT on description on banggood. Yes it is a 2 speed and I'm sure I can figure out the problem but don't want to mess with until I speak to banggood
yes there is a mistake on the banggood page about the light. You can already try to check the transmitter parameter to see if it is a gear shift porblem.
Switch Off When Not In Use ya it's either the shifter or set screw on motor/pinion from the sounds of it. It's just when I order rtr I should get rtr or I would pay an extra 20$ and get twin hammers kit instead. Thanks for your input
ram dat switch the 3rd channel into gear. Its in neutral.
How easy is to get metal gears and parts. That break easy ..
Can someone tell me .thanks .. !!
Search vaterra twin hammer spares.
this or 10428 c-2? do you know what are the diferences?
This one is better than C2/B2. This one has : metal gears, slipper clutch, 2 speeds, oil shock absorbers.
ok thanks bro!
Switch Off When Not In Use what about the 10428a?
How to on car 1042I
Does it have a slipper clutch system
Yes, watch carefully my video, i show that it has a slipper.
Size of the battery compartment please?
105x33
hi, why in some online market it says it only requires 4 batteries for the transmitter? tnx
Because the 4 batteries for the transmitter aren't included in the box. Most of the time RTR cars don't come with the transmitter batteries.
but with ur unboxing it needs 6 batteries? but on the online market which im planning to buy it says it only needs 4? just confused, i dont wanna get scammed..tnx
You're right, i done a mistake, this transmitter use 6 batteries. Maybe the webshop you are talking about done the same mistake or it isn't exactly the same car. The 10428, A333 (there are two differents cars Wltoys A333 also), and K949 are same, the 10428-C2 or B2 aren't same.
another thing, can i fill oil in its shocks? tnx, just subscribed to ur channel
Yes you can.
I see it a lot with Wltoys. Sloppy building and missing parts. Otherwise they look good :)
any parts available for it ?
Compatible with the Vaterra twin hammer parts or you can find parts on wl-toys.com.
is WLtoys hobby grade or toy grade rc?
Most of the time it is toy grade but this one is hobby grade.
what type of motor does it have
540 brushed motor 7.4 volt, maybe a 16T.
Switch Off When Not In Use thats 1/10 scale size motor lol
Yes, and?
Should I get the 10428 or the 12428
The 10428 is way better.
the 12428 is better
Not at all. The 12428 doesn't have a slipper, metal gears, oil filled shock absorbers and it has weak plastic gears.
Switch Off When Not In Use hi man i have a question, the front differential of the 10428 are in metal right? Are of the same size of the 12428? Could it be used for an upgrade on the 12428? Last question, do you no if one of these two cars does have differential good for wltoys 12402/404?
How to buy this sir my country is India
Is this waterproof?
Yes
What price the RC
www.banggood.com/WLtoys-10428-110-2_4G-4WD-RC-Monster-Crawler-RC-Car-with-LED-Light-p-1088703.html?p=GZ21132319344201508K
Beli dimana???
this car seems slow considering the less expensive 12428 reaches around 45KMH
yes, read my answer on the speed test video ;).
No, i'm french ;)
niceguy60 buth it has torque
bigger scale
It has the same motor as the 12428 so I’m a bit disappointed
How to turn switch on my 10428 rc car can't find it
It is on the ESC itself : ua-cam.com/video/6g2hiIroKK4/v-deo.html , you must let it turn on because it isn"t axxessible with the body shell.
@@NobodyNoWhereElse thank you
Thought it had lights?
Not this one, the smaller 12428 has light.
Ya, I have that one. Love the rx on the 10428! Might buy that car for the rx! Lol
guys and girls who are wanting to buy this rc car be aware of it being more of a short course truck then a rock crawler
It is between these two kinds of truck indeed. It is called a rock racer, not really a crawler.
La roue gauche à un problème ?
Non.
@@NobodyNoWhereElse ok
No bashing?
I did one bashing video with it.
plz reply me sir How to buy this product Iam Indian
Banggod ship to india. Look at the link below the video.
Any rc online shop that ships to philippines?
I can't tell. Banggood doesn't ship to Philippines?
Switch Off When Not In Use oh they do , i found it out after searching and i turned
on my location services btw nice vid
Thanks, glad you like. And happy to hear you have found a solution.
Why was there no voice?
On some of my last videos i talk, but my english speaking isn't perfect
@@NobodyNoWhereElse o I understand I just didn’t know if the sound wasn’t working lol great video!!!
Haganya nerapa???
2,2 juta rupiah
Hace leds?
This car doesn't have light.
A como el precio
How much is it?
Check the link below the video 😉
Super vidéo, mais le mode d emplois est il en français, surtout pour la commande svp
Merci. Non pas en français, c'est de plus en plus rare les mode d'emploi en français. Mais il est facile de comprendre comment le tranmetteur fonctionne, au pire on peut trouver des réponses sur internet car les fonctionnalités sont des fonctionnalités courante aux transmetteurs.
Switch Off When Not In Use ha OK merci, car elle a quand même l air difficile a comprendre, mais je chercherais alors
Is this asmr????
I can have the car you used in this video's
It
This is not the transmitter it comes with so dont ne confused as you should have put that in the title
This is the receiver i received. Take a look on the banggood product page (link below the video), you will see the same Tx. This car has come with this transmitter during a long time. Maybe WLtoys sell this car with a different transmitter, i can't tell, i'm not a WLtoys employe or even a banggood employe, i'm a rc user. Maybe you haven't bought the exact same car, there is some models based on the same chassis. In all my videos i show exactly what i receive, not like many reviewers/sellers who describe products like something awesome or marvelous almost every time. Under each my videos there is a link to my review, you can take a look for more information.
What's usa and china???
What do you mean? I don't understand your question. The car is a chinese car, copied from a UK car and i'm french ^^.
I mean, the chinese have faked it 😊
Switch Off When Not In Use hey man
YEs, they steal the design ^^, not the only car like that. Even the Traxxas slash has been copied with the Huanqi 727 ^^.
Switch Off When Not In Use nice to meet you, thank you very much^^
Why don't you talk to us instead of using captions. Oh bye the way it is called a ball race. The ball bearing is what is inside it
I don't spaek english well enough. Also : ball bearing : en.wikipedia.org/wiki/Ball_bearing , ball race : en.wikipedia.org/wiki/Race_(bearing) ? So i talk about a ball bearing and not a ball race ;)
Ok it's not ball bearing it's just a bearing with bearing balls inside
There are different kind of bearings, this one is a ball bearing.
just use your voice
Wow, WLTOYS is normally decent quality for a great price. Must have been an honest mistake. Someone actually lost there bearings at work one day huh?
The brands where there was the most bearings missing was Wltoys for me so far.
Please olease
Vendes tú carro RC
No, sorry. But this car can be buy for cheap on chineses webshop.
Hi switch off when not in use can you send me a Jungle warrior For free please I'm a poor guy So I can't afford this much money
Rajendran G ill tell santa claus to bring you one.
what the you dis is foarmy werisdes
sorry, i don't understand what you say.
Thanks for the honest review/unboxing/confirmation. Just as I assumed..... junk. The name says it all wl TOYS. You get what you pay for like most everything in life!
It isn't as junk as you think. Sure there is a missing ball bearing but for the price it is a good car. Many user are happy with this chassis, same chassis than K929, A333. I stay honest and show what can happen in real life in my videos, not like many "advertise" videos of reviewers who more like to show themself than the car but who also have many suscribers because their videos are atractive.
rc Ohio I own quite a few Wltoys rc cars most came with everything working and are still in working condition but there is some lemons as well as long as you don't mind what you're paying for. The price ratio vs quality and performance is beyond superb
This one is above than some others WLtoys cars, i mean, better.
can't you speak?
1man1van
I disagree with the below comment,I turned it off after 30/40 seconds coz there was NO TALKING,It would be a million times better if you described what you saw n your reaction to seeing it.this version BIG THUMBS DOWN.SORRY.
Most of the time i don't care about comments in videos, they are often biased, i prefer only show what you can expect and make your own opinion from what you see and not what you hear. If you don't want to watch more, you do as you want, but don't be surprised if you find à missing part on this car.