I was going to say the same thing. I followed Steve's work years and years ago. I learned so much from his early haunts... my brother and I created several monster mud statues in 2000 - 2001 that were neighborhood favorites for years.
@@danielle5533 the actual mud, no. It holds up well against the elements. However, if your usage of the mud leaves exposed areas, those areas would need to be sealed (obviously).
I love your videos yet I'd enjoy to see them longer with more detail on instructions with handling of the projects...please! And Thank you for what we do get of you time and skills.
@@VanOaksProps I agree. You're really knowledgeable and I'd love to see longer-length videos from you. I've watched a lot of videos where people do DIY Haunt props and such that are long - but they either don't have the same level of knowledge or don't describe it as well - or there is an audio/camera problem (none of which are an issue with your channel). Please consider longer videos if you're able!
I have a few snakes and I’ve made backgrounds for them using foam boards, unsanded grout and just hitting it with a polycrylic, should work great for a tombstone
It can be done both ways. It all depends on the application. For our monster mud statue, “Charlotte,” we dressed the body form in a shirt and painted it on. But for the cape and dress we submerged the bedsheets, wrung out the excess and then draped it on the body.
I love ❤ the monster mud with joint compound. I used it on a paper mache tombstone and other projects last year..it worked perfectly...even held up in the Florida rain 🙃😆.I'm making more projects & tombstones this year. Thank you 😊 👍🏽👏🏾
Has anyone tried using regular thinset? I was at HD looking at the recommend surfaces 😂 Regular thinset good over masonry products whereas the modified thinset for masonry, plywood etc. Like to know how well regular thinset would hold up as it’s much cheaper than modified
Thanks for explaining. In how to make this. I was wondering, what they used and what I need to buy this year for my haunt. I'm doing at my house this year.
That's an awesome tutorial and suggestion! I haven't done a traditional monster mud project due to the expense of the joint compound. I'm real interested in the mortar suggestion - THANKS 👍
My first thoughts about 2.0 Monster Mud was to use it as a replacement for Dry-Loc on tombstones. If you're using Thompson's though, that's just another step and may be better to just stay with the dry-loc for a one coat time savings. Thanks for the video! I know as Halloween is just around the corner, making these and prepping for the haunt is probably a real juggle. Tutorial Request: How to Haunted Radio Prop (I'm dying to know)
Awesome information. One problem though. Thompson’s states that it isn’t to be Applied over paint. If you’re using exterior paint in the mix, technically that should be enough.
Hey. Did u have to add water? I mixed equally the powdered thin set and latex paint and I couldn’t mix it, it got way to dry as soon as I mixed the two
Not $5 for 50lb bag of thin set in Canada. $15 at Home Depot and $25 at Lowe’s. But still inexpensive compared to alternatives. Never heard of this, looking forward to trying it out.
Nothing that I've permanently left outside for more than a few weeks in California weather and it was fine. The monster mud would soften overnight night from the moisture in the air, but would firm up again during the daytime when it was warm.
Is that the spray gun you would use for the monster mud and Thompson's Water Seal? And DUDE! This is the solution I need to give my torches texture! I tried using Mod Podge to give the PVC pipe/handle a wood grain look. It worked but it was very subtle. It looks like the OG monster mud might work better and it looks like monster mud 2.0 would give the fire cage a more cast iron feel than the undercoat spray that I am using. Thanks!
Monster mud is too thick to be sprayed on with that spray gun and would need to be applied by hand. The Critter spray gun I used is great for thinner materials like waterseal and paint. If you're looking to give your props more texture check out this video - much easier and less messy than monster mud: ua-cam.com/video/F2IZTHWuQVU/v-deo.html
@@VanOaksProps thanks sir. I must say as a haunter that is just going pro… and a 20 year professional editor and producer… you channel is THE best. I had been toying with doing a channel as I learn more because I’m so used to seeing the amateur video work… then I saw your channel and was, welp, there ya go lol. Well done.
Do you use regular non-modified thinset mortar or do you need to to mix with hardener , I was going to buy Home Depot custom blend economical non - modified thin set mortar
I just found this video. I am just starting out in making exterior props for Halloween and learning so much about everything. I knew about DryLock. I have access to all the materials to make either Monster Mud or the 2.0 version. Going to first try upgrading cheap foam tombstones with a better finish and to perfect my skills. Then on to making my own from scratch. As for the protective coating, I am guessing you can use any that are exterior rated (Thompsons, Cabot, Flood, Ready Seal, Behr, or Olympic). Is water-based preferred to oil based?
How does the 2.0 hold up to extreme temperatures? I'm going to store my props in a sea can when not in use. Our summers get to 35-40°C and -40°C for winters.
Awesome video! Love the editing style! Giving me old lifestyle video vibes lol. This is the most “to the point” tutorial on Monster mud. These videos can get really long on this subject. We use the 2.0 recipe Awesome job! Ugh always jealous of how awesome Charlotte came out! Your wife did a brilliant job. Giving your skills a run for your money lol😉
Thanks! That's exactly what I was going for. I'm glad it came across. Monster Mud is one of those subjects that lots of people know about but seems to be having a resurgence of interest from unfamiliar haunters, so it only seemed appropriate to make a primer for the new batch that wasn't too long, covered the major points, and most importantly didn't tell them what to make with it. Charlotte is great, I'm glad we refreshed her paint last year. She looks better than ever and is really protected from the elements. My wife is 100% my secret weapon.
Thanks for the history lesson! That was fun! I’ve seen several recipes through the years for monster mud- have you seen or looked into Hypertufa? I think it’s my next test - there’s also several recipes but it’s 1:1:1 usually Portland cement, vermiculite and sand (or peat) +water - you can dunk fabric, lay it on what you want and it ends up a concrete-like finish- or less water and it’s sort of scuptable. Your Monster mud 2.0 kinda reminds me of that! Wonder what the cost difference is... 🤔 keep making vids for sure!!
i enjoy your channel, and look foward to your prop build videos every week. i have a question for you? i would like to make a version of the angel of death cemetery statue in Cleveland,ohio. how do i get that weathered green/teal l00k? if anybody could help it would be greatly appreciated
I wondered if you have ever run into fabric that the monster mud won’t take to? I’m working on a piece using an old wedding dress and the MM is actually flaking off the skirt! 😳 I’m kinda shocked and am wonder if the fabric was scotch guarded or something. 🤔
@@VanOaksProps ok, I threw away the skirt, started over, and got the best results using the joint compound version of MM. I think the added bit of latex in that copes better with fabrics.
The history lesson in the old timey style was so fun! Of the 2 types that brushed on the paper, which is heavier? I know original MM when full dry on a prop weighs the prop down, which you may or may not want. Thanks for the ceramic powder tip. Do they sell in smaller quantities? I only see the premixed mortar in smaller quantity.
The monster mud 2.0. You have to add water to the powdered thin set, right? Do I measure equal parts thin set and paint, then add water to the thin set and then mix the paint and thin set together?
You’re looking for pancake batter consistency. So if 1:1 is too thick, then add more paint. Also, don’t mix too much at a time since it may start to setup before you’ve been able to apply it.
@@VanOaksPropsif one were doing this version ( 2.0) and dipping the cloths in the mixture I'm assuming you would do one of the thinner mixtures 1:3? Also one other question. Would I still need to seal the prop if I did this method being that the paint and the mortar mix / thin set practically turns to stone/ rock/ concrete when done .
I want to add creepy cloth onto a halloween prop covered by canvas. I don't want to use monster mud or monster mud alternative because of the weight. I want to coat the creep cloth in some form of mixture which would allow it to drape over the canvas and stiffen-any thoughts?
That's a tough one. The benefit of monster mud or monster mud alternatives is that they protect the material and stiffen it. I think the creepy cloth is thin enough that weight won't be an issue and it'll give you the protection you're looking for.
What about trying a fabric stiffener? I don't know how well it would hold up in outdoor conditions, but it would stiffen the cloth without adding a lot of weight...
Don’t know if this is a stupid question or not, but I am making two entry cemetery pillars for my haunt this year and I’m a little strapped for cash, do I have to hardcoat my pillars before I add monster mud? Or can monster mud with a waterseal withstand the elements on its own?
Love the 2.0 version defiantly going to have to give it a try. I wasn't sure I understood at the end, do you spray the 2.0 on with the critter spray gun or is that only for the water sealer?
Thanks!! Drylok and monster mud are not interchangeable. Drylok is a commercially available masonry sealer that has a gritty texture that look stone-like, but it’s not rigid like monster mud.
Does it matter if you use Acrylic or Latex paint? The recipe calls for latex paint, but in the video I see you're using acrylic paint. They are not the same.
That thinset/latex mix is *very* stiff at 1:1. It's also not very sticky - more like a modeling compound than anything else. I'd use 3 thinset to 4 paint.
I would like to confirm that 3/4 gallon thinset to 1 gallon latex paint works, now that I've tried it. Even then, it sets pretty quickly and needs to have some water added about halfway through using it, anyway at the speed I use it. What I am doing is covering fake river rocks made from Great Stuff spray foam over a cheap plastic salad bowl - I pull the salad bowl out and use it again once the foam sets - and I have to say that while it covers the worminess of the foam, it takes just days to dry in the recesses.
Would you recommend a 1-1 ratio of thin-set if I've dripping fabric into it? Like always, I really enjoyed your video and appreciate you sharing your prop knowledge!
@@jesseallen3981 It's a decent amount of time, although It can shorten depending on the weather. I've had it workable for 20 minutes on an 80 degree day and 10 minutes on a 100 degree day. The working time also depends on your ratio. The more paint, the longer the working time.
@@VanOaksProps Its currently 80 in Tulsa and dropping as sun sets. I want t to get my reaper done tonite. Theyre calling for low 50s tonite so should I bring it inside after I get the mud on or will it be OK left out.
This is a definite save video. Thanks so much for some great information.
Glad it was helpful!
Do these mud materials get ruined by rainy Halloweens? I guess you have to use water seal?
Thanks for mentioning Steve Hickman of Terror Syndicate. So many folks who created many of the methods we use are being forgotten.
It’s always important to give proper credit.
I was going to say the same thing. I followed Steve's work years and years ago. I learned so much from his early haunts... my brother and I created several monster mud statues in 2000 - 2001 that were neighborhood favorites for years.
Terror syndicate is one of the best haunted house sites ever.
Monster mud 2.0 is perfect for outdoor stone items, like gravestones. And it holds up to the weather very well.
Absolutely.
With both of the mixture items in 2.0 does it have to be sealed?
Well with both of them being outdoor rated let me add that
@@danielle5533 the actual mud, no. It holds up well against the elements. However, if your usage of the mud leaves exposed areas, those areas would need to be sealed (obviously).
Definitely like the gritty texture of thinset and I have a bag in the basement! Used this to cover my sonotube columns.
I love your videos yet I'd enjoy to see them longer with more detail on instructions with handling of the projects...please! And Thank you for what we do get of you time and skills.
Thank you for the feedback. I’m always afraid of the videos running too long. Good to know that’s not the case.
@@VanOaksProps I agree. You're really knowledgeable and I'd love to see longer-length videos from you. I've watched a lot of videos where people do DIY Haunt props and such that are long - but they either don't have the same level of knowledge or don't describe it as well - or there is an audio/camera problem (none of which are an issue with your channel). Please consider longer videos if you're able!
I love the Coronet Film style interlude! Haha. Made me laugh!!!
Thanks!!
I have a few snakes and I’ve made backgrounds for them using foam boards, unsanded grout and just hitting it with a polycrylic, should work great for a tombstone
I would love to see how you apply it to fabric for draping. Some say to dip the fabric some say to brush on.
It can be done both ways. It all depends on the application. For our monster mud statue, “Charlotte,” we dressed the body form in a shirt and painted it on. But for the cape and dress we submerged the bedsheets, wrung out the excess and then draped it on the body.
GASP...thin set...GENIUS!!!
I use something similar with my props but incorporate latex caulk in too with the latex paint and joint compound.
I’ve never used Monster Mud. Now I want to try. Thank you for the tutorial 👍🏼
You’re welcome 😊
I love ❤ the monster mud with joint compound. I used it on a paper mache tombstone and other projects last year..it worked perfectly...even held up in the Florida rain 🙃😆.I'm making more projects & tombstones this year. Thank you 😊 👍🏽👏🏾
Great video! Monster mud is amazingly versatile and has such great results for the cost.
Definitely!
I never knew about the 2.0 recipe! Excited to try it. 999
Has anyone tried using regular thinset? I was at HD looking at the recommend surfaces 😂 Regular thinset good over masonry products whereas the modified thinset for masonry, plywood etc.
Like to know how well regular thinset would hold up as it’s much cheaper than modified
Thanks for explaining. In how to make this. I was wondering, what they used and what I need to buy this year for my haunt. I'm doing at my house this year.
That's an awesome tutorial and suggestion! I haven't done a traditional monster mud project due to the expense of the joint compound. I'm real interested in the mortar suggestion - THANKS 👍
Glad you enjoyed it. Thanks for watching!
Ugh, I *knew* we had the ratios wrong; no wonder it came out so...gloopy. And great tip on using Thin-Set, definitely gonna give that a try.
Would love to see a video of you using this with a texture sprayer. Curious as to the result on a wall panel. Great stuff as always.
Thanks for watching!
So, could you mix this all in a big tub and soak your cloth in it? Then, pull it out and drape it how you want it?
Absolutely, although you’ll need to squeeze off the excess after you’ve dunked all the fabric.
@@VanOaksProps OK. Great, thanks!😊👍
My first thoughts about 2.0 Monster Mud was to use it as a replacement for Dry-Loc on tombstones. If you're using Thompson's though, that's just another step and may be better to just stay with the dry-loc for a one coat time savings. Thanks for the video! I know as Halloween is just around the corner, making these and prepping for the haunt is probably a real juggle.
Tutorial Request: How to Haunted Radio Prop (I'm dying to know)
Drylok is definitely my goto, but ever since they changed formulas it’s been harder to find “Drylok Original.”
Thank you!!! I have been looking for this answer. ❤
Glad it was helpful!
I'll have to try thin set next time!
Go for it!
Awesome information. One problem though. Thompson’s states that it isn’t to be Applied over paint. If you’re using exterior paint in the mix, technically that should be enough.
Good to know!
Thanks so much for sharing! I'll be trying the 2.0 in my project next month! 😊
You bet! Good luck on your project.
Hey. Did u have to add water? I mixed equally the powdered thin set and latex paint and I couldn’t mix it, it got way to dry as soon as I mixed the two
Thank you for sharing this. Do u think Portland cement or quikrete sand topping mix would have a similar effect?
Probably. I can’t say for certain.
If I'm going to make a prop to stay indoors, I'm guessing that it is okay to use interior paint in the recipe.
That should be fine.
Another great video thanks for making it 999
Glad you enjoyed it
Not $5 for 50lb bag of thin set in Canada. $15 at Home Depot and $25 at Lowe’s. But still inexpensive compared to alternatives. Never heard of this, looking forward to trying it out.
Can I spray on the 2.0 mud with the critter gun? Then, clean with acetone and use the same gun to apply the Thompson's Water Seal?
No. It’s too thick for the critter’s nozzle. You can, however, use it for the water seal
@@VanOaksProps Thank you!
What kind of gun would allow for spraying the 3 to 1 mixture?
@@603VIL you’d need some kind of hopper gun like the kind they use for stucco. Something like this: amzn.to/3PrcQHA
What other thin set or mortar mix could you use that doesn't come in such a big bag? 50 lb is a lot. Thank you.
Most, if not all, come in bags that size, unfortunately.
Do you have any monster mud items you have left outside? How did they do?
Nothing that I've permanently left outside for more than a few weeks in California weather and it was fine. The monster mud would soften overnight night from the moisture in the air, but would firm up again during the daytime when it was warm.
Hey there again big man. Would Thompsons water sealer need to be thinner berore going into a sprayer?
Nope. It's thin like water right out of the can.
Great job!
Thanks!
Your welcome!
Is that the spray gun you would use for the monster mud and Thompson's Water Seal? And DUDE! This is the solution I need to give my torches texture! I tried using Mod Podge to give the PVC pipe/handle a wood grain look. It worked but it was very subtle. It looks like the OG monster mud might work better and it looks like monster mud 2.0 would give the fire cage a more cast iron feel than the undercoat spray that I am using. Thanks!
Would grout mix work as well as thinset? We just had our floors re-done and the contractors left a bag of grout.
Monster mud is too thick to be sprayed on with that spray gun and would need to be applied by hand. The Critter spray gun I used is great for thinner materials like waterseal and paint.
If you're looking to give your props more texture check out this video - much easier and less messy than monster mud: ua-cam.com/video/F2IZTHWuQVU/v-deo.html
@@VanOaksProps thanks man!
@@charleslamb2214 my pleasure and thanks for the support!
What about using drylok over the 2.0… making props that are gonna have to be outside year round.
You could absolutely do that.
@@VanOaksProps thanks sir. I must say as a haunter that is just going pro… and a 20 year professional editor and producer… you channel is THE best. I had been toying with doing a channel as I learn more because I’m so used to seeing the amateur video work… then I saw your channel and was, welp, there ya go lol. Well done.
For monster mud 2.0 is that ratio volume or weight?
I do it by volume.
Do you use regular non-modified thinset mortar or do you need to to mix with hardener , I was going to buy Home Depot custom blend economical non - modified thin set mortar
non-modified.
For the ratios are we talking by weight or volume?
Great question. It’s by volume.
Good stuff. I am glad I found it
Welcome aboard!
I just found this video. I am just starting out in making exterior props for Halloween and learning so much about everything. I knew about DryLock. I have access to all the materials to make either Monster Mud or the 2.0 version. Going to first try upgrading cheap foam tombstones with a better finish and to perfect my skills. Then on to making my own from scratch. As for the protective coating, I am guessing you can use any that are exterior rated (Thompsons, Cabot, Flood, Ready Seal, Behr, or Olympic). Is water-based preferred to oil based?
That's correct. We've had good luck with Thompson's Water Seal. As for water vs oil, I chose water since everything else is water-based.
I'm guessing this mixture hardens. Is there a more flexible mixture, so a prop stone statue can be animated?
That's correct. You'd probably want to go with something like Plastidip and then faux paint the stone coloring over it with acrylic paint.
@@VanOaksProps excellent idea! Thank you!
How does the 2.0 hold up to extreme temperatures? I'm going to store my props in a sea can when not in use. Our summers get to 35-40°C and -40°C for winters.
Great question. It's fine in the heat, but I'm not sure about -40°C. It never gets anywhere near that cold in Los Angeles.
@@VanOaksProps thanks for the speedy response. I will test it and let you know after our cold winter
Awesome video! Love the editing style! Giving me old lifestyle video vibes lol. This is the most “to the point” tutorial on Monster mud. These videos can get really long on this subject. We use the 2.0 recipe Awesome job!
Ugh always jealous of how awesome Charlotte came out! Your wife did a brilliant job. Giving your skills a run for your money lol😉
Thanks! That's exactly what I was going for. I'm glad it came across. Monster Mud is one of those subjects that lots of people know about but seems to be having a resurgence of interest from unfamiliar haunters, so it only seemed appropriate to make a primer for the new batch that wasn't too long, covered the major points, and most importantly didn't tell them what to make with it. Charlotte is great, I'm glad we refreshed her paint last year. She looks better than ever and is really protected from the elements. My wife is 100% my secret weapon.
Thanks for the history lesson! That was fun!
I’ve seen several recipes through the years for monster mud- have you seen or looked into Hypertufa? I think it’s my next test - there’s also several recipes but it’s 1:1:1 usually Portland cement, vermiculite and sand (or peat) +water - you can dunk fabric, lay it on what you want and it ends up a concrete-like finish- or less water and it’s sort of scuptable. Your Monster mud 2.0 kinda reminds me of that! Wonder what the cost difference is... 🤔 keep making vids for sure!!
Glad you enjoyed it. I haven't looked into hypertufa, but I will now!
Do you know if this would stick if plastered onto a plastic surface such as polypropylene?
Yes. I've used it to cover plastic garden urns and have had no issues.
i enjoy your channel, and look foward to your prop build videos every week. i have a question for you? i would like to make a version of the angel of death cemetery statue in Cleveland,ohio. how do i get that weathered green/teal l00k? if anybody could help it would be greatly appreciated
Try this: ua-cam.com/video/RjiPjrqe2J0/v-deo.html
I wondered if you have ever run into fabric that the monster mud won’t take to? I’m working on a piece using an old wedding dress and the MM is actually flaking off the skirt! 😳 I’m kinda shocked and am wonder if the fabric was scotch guarded or something. 🤔
I think natural fabrics, like cotton, do better than synthetics.
@@VanOaksProps damn. I didn’t expect to have a Teflon skirt. I hope I can salvage this. It’s some sort of satin🤣
@@VanOaksProps ok, I threw away the skirt, started over, and got the best results using the joint compound version of MM. I think the added bit of latex in that copes better with fabrics.
So I have a question is there a certain cloth you recommend because I can't wait to try this
We used cotton bedsheets that we found at a second hand store. You’ll want to stay away from synthetic fabrics.
The history lesson in the old timey style was so fun! Of the 2 types that brushed on the paper, which is heavier? I know original MM when full dry on a prop weighs the prop down, which you may or may not want. Thanks for the ceramic powder tip. Do they sell in smaller quantities? I only see the premixed mortar in smaller quantity.
Brushed on, I’d say original monster mud is heavier. As for dry thinset, I think it’s only 25 or 50lbs bags.
Very interesting!!
Will polyurethane work instead of Thompson water seal?
It should.
Nice presentation. What you're calling Monster Mud 2.0 is sometimes known as Morbid Mortar.
Love that! Much better than 2.0.
I know the 2.0 as "scenic goop" from the theatrical world
The monster mud 2.0. You have to add water to the powdered thin set, right? Do I measure equal parts thin set and paint, then add water to the thin set and then mix the paint and thin set together?
Nope. You mix the dry powder with the latex paint.
@@VanOaksProps then it can’t be 1 to 1. As soon as I start mixing it, it gets so pasty so quickly and I can’t mix it anymore.
You’re looking for pancake batter consistency. So if 1:1 is too thick, then add more paint. Also, don’t mix too much at a time since it may start to setup before you’ve been able to apply it.
Also, 1:1 is for filling voids. 1:2 or 1:3 is the ratio for brush on applications
@@VanOaksPropsif one were doing this version ( 2.0) and dipping the cloths in the mixture I'm assuming you would do one of the thinner mixtures 1:3?
Also one other question. Would I still need to seal the prop if I did this method being that the paint and the mortar mix / thin set practically turns to stone/ rock/ concrete when done .
I want to add creepy cloth onto a halloween prop covered by canvas. I don't want to use monster mud or monster mud alternative because of the weight. I want to coat the creep cloth in some form of mixture which would allow it to drape over the canvas and stiffen-any thoughts?
That's a tough one. The benefit of monster mud or monster mud alternatives is that they protect the material and stiffen it. I think the creepy cloth is thin enough that weight won't be an issue and it'll give you the protection you're looking for.
What about trying a fabric stiffener? I don't know how well it would hold up in outdoor conditions, but it would stiffen the cloth without adding a lot of weight...
@@bobajeff1138 Unfortunately, it wouldn't withstand the exposure to night time moisture.
@@VanOaksProps Gotcha. Even if one were to add Scotchgard Sun and Water Shield, I believe that would be more work than necessary. Thanks, Derek!
Don’t know if this is a stupid question or not, but I am making two entry cemetery pillars for my haunt this year and I’m a little strapped for cash, do I have to hardcoat my pillars before I add monster mud? Or can monster mud with a waterseal withstand the elements on its own?
No. The monster mud is your hard coat and it will absolutely withstand the elements.
VanOaksProps Thanks so much for responding! I really appreciate it.
Thank you so much! Just...thank you
What if you use powder joint compound instead of the premix with latex paint?
Would we get the same results as the premix joint compound?
Good question. I assume it would work but have never tried it.
Is this similar to Rosco Foamcoat?
Not sure. I’ve never used it.
Love the 2.0 version defiantly going to have to give it a try. I wasn't sure I understood at the end, do you spray the 2.0 on with the critter spray gun or is that only for the water sealer?
The Critter spray gun is just for the Thompson's Water Seal or if you needed to paint a large surface. It's not for the monster mud.
For Monster Mud 2.0, does Thin-Set also go by "Thin-Set Mortar"? Thank you!
Yes. Same product.
@@VanOaksProps Thank you!
Can modified thinset be used for 2.0 verson?
The thinset I used is a modified thinset, so yes.
Hello, I am making some outdoor animatronic props, is there a flexible waterproof version?
Not that I'm aware of.
@@VanOaksProps yeah, I was afraid of that. Looks like I will have to build a shelter of some sort for them. Thanks for the reply.
Where do I get mud powder pls
You make it using the materials listed in the video.
Great video! Is drylok the same thing? Can you use them interchangeably? Thanks
Thanks!! Drylok and monster mud are not interchangeable. Drylok is a commercially available masonry sealer that has a gritty texture that look stone-like, but it’s not rigid like monster mud.
Thank you!
When you mix all 3, does the fabric become weather resistant?
Yes. The fibers in the fabric absorb the mixture, which is weather resistant and will stiffen as it dries.
@@VanOaksProps thank you so much
I can think of 999 uses for Monster Mud!!!
Does it matter if you use Acrylic or Latex paint? The recipe calls for latex paint, but in the video I see you're using acrylic paint. They are not the same.
You can use either.
That thinset/latex mix is *very* stiff at 1:1. It's also not very sticky - more like a modeling compound than anything else. I'd use 3 thinset to 4 paint.
I would like to confirm that 3/4 gallon thinset to 1 gallon latex paint works, now that I've tried it. Even then, it sets pretty quickly and needs to have some water added about halfway through using it, anyway at the speed I use it. What I am doing is covering fake river rocks made from Great Stuff spray foam over a cheap plastic salad bowl - I pull the salad bowl out and use it again once the foam sets - and I have to say that while it covers the worminess of the foam, it takes just days to dry in the recesses.
Awesome.
Thanks!
Now I know 🤔😎👍
Would you recommend a 1-1 ratio of thin-set if I've dripping fabric into it?
Like always, I really enjoyed your video and appreciate you sharing your prop knowledge!
I’d say 1:2 for dipping.
@@VanOaksProps Thanks again. Can't wait till next Saturday
@@VanOaksProps what is the work time for the 2.0?
@@jesseallen3981 It's a decent amount of time, although It can shorten depending on the weather. I've had it workable for 20 minutes on an 80 degree day and 10 minutes on a 100 degree day. The working time also depends on your ratio. The more paint, the longer the working time.
@@VanOaksProps Its currently 80 in Tulsa and dropping as sun sets. I want t to get my reaper done tonite. Theyre calling for low 50s tonite so should I bring it inside after I get the mud on or will it be OK left out.
These are fun but nasty to make 😁
Totally!
999
Why do you call a monster mud if it has nothing to do with monsters
You’ll have to ask the person who named it.
999
999
999
999
999