Bought one of these from amazon ,good packaging, good quality ,would be nice to be able to get spare parts for it just in case ,now have to learn .would be nice with end stops,if you decide to do this will you be supplying it as upgrade
Totem S 40W / NEJE Master 2S Max / Atomstack A5 Pro / Ortur Laser Master 2 pro I found the four. would like to know which one of the favorites is and which one is best for small knives, normal kitchen knives, silver key rings, zippo, silver engraved bracelet for children. thank you in advance for the help and information I will get. nice day
just received my machine today. software i installed both lasergrbl and light burn, both recognized the machine start and runs in both but not beam from laser. inferred + shows up everything working but the laser. so confused. what am I doing wrong.
hallo ik heb een totem S 40w maar heb veel problemen met het snijden in hout van 1.5 en 3 mm kan er mij iemand helpen heb alle mogelijke instellingen al gebruikt. zou het ook de laser kunnen zijn die niet goed werkt, denk dat de software GRBL in orde zal zijn he. ik gebruik de voorinstellingen van daar en het werkt niet. aangepaste werken ook niet kan iemand mij tips geven aub
How can I make the laser draw a shape like 8:45 ? I have installed the machine and got the laser software but when I load a picture the laser doesnt engrave anything on the piece of wood! Do I need a special piece of wood? Can I ise anything else? Help plz
Hello friend, Please send your problems to this after-sales mailbox, and professional after-sales personnel will solve the problem for you, service@twotrees3d.com
Bought one of these from amazon ,good packaging, good quality ,would be nice to be able to get spare parts for it just in case ,now have to learn .would be nice with end stops,if you decide to do this will you be supplying it as upgrade
Please show settings used
Totem S 40W / NEJE Master 2S Max / Atomstack A5 Pro / Ortur Laser Master 2 pro
I found the four. would like to know which one of the favorites is and which one is best for small knives, normal kitchen knives, silver key rings, zippo, silver engraved bracelet for children. thank you in advance for the help and information I will get. nice day
Can i use with mac?
What are the settings for the painted aluminum you show in your video? I cannot get mine to do that good a job.
Hello, Please send your problems to this after-sales mailbox: service@twotrees3d.com
How thick can it cut?
Very nice machine. Seems to be a really good quality. But it’s a pity you didn’t add any endstops.
We may have plans to add it later!
A quoi servent les butées ??
@@NIGHTBIRD13 for homing and easier alignment with material situated in workspace
Merci de me repondre😁
Comment faire sans ?
What is the crosshairs do? It’s not aligned with the laser so it must be for something else.
It is used for positioning. Our crosshairs are used to position objects at a right angle.
I couldn't cut with my machine! Could you, please, share the configurations for cuttind 3mm wood and inox engraving? thanks in adv
Hello, dear, please inquire through our email, the technicians can help you, service@twotrees3dprinter.com
hey helfe bitte was für daten fahrt Euro gravirer meine macht Fehler bei Kontur und bei Wiederholung verzieht Bild
just received my machine today. software i installed both lasergrbl and light burn, both recognized the machine start and runs in both but not beam from laser. inferred + shows up everything working but the laser. so confused. what am I doing wrong.
I have same issue . Help if you fix it
do you have any parameters to be used on lightburn?
Lightburn will recognize the content of our motherboard after connecting
Just set the size
i wan to buy it..but i need to know how long will the laser last if we use it 1 hour daily
Lifespan is about 20000-30000 hours
i can not file parameter configuration of laser english file. can you give me link for that file ?
Hello, download the file here: www.twotrees3dprinter.com/#/app/downloadxq?name=TOTEM_S
engrave in gold?
How do you put the mother board on? I can’t get it to stay
And I’m 2 minutes from packing it up and sending it back
Hi, Don't you know how to install the motherboard?
I understand how to adjust the laser’s speed, but how do you control the laser’s power output? It’s stuck on 28% and I can’t adjust it. Thanks!
use lightburn more versatile
@@johnigla3695 yup, bought it last week. Thanks 😊
hallo ik heb een totem S 40w maar heb veel problemen met het snijden in hout van 1.5 en 3 mm kan er mij iemand helpen heb alle mogelijke instellingen al gebruikt. zou het ook de laser kunnen zijn die niet goed werkt, denk dat de software GRBL in orde zal zijn he. ik gebruik de voorinstellingen van daar en het werkt niet. aangepaste werken ook niet kan iemand mij tips geven aub
Where did you buy it? You can directly contact the corresponding person, so that the reply will be faster
How can I make the laser draw a shape like 8:45 ? I have installed the machine and got the laser software but when I load a picture the laser doesnt engrave anything on the piece of wood! Do I need a special piece of wood? Can I ise anything else? Help plz
Hello friend, Please send your problems to this after-sales mailbox, and professional after-sales personnel will solve the problem for you, service@twotrees3d.com
@@AngelMa I did send it, 4 days ago and no one replied
@@Mr.Mooody what's your email address?
@@AngelMa is there any way to contact you besides me putting my email address publicly in a youtube comment section?
@@Mr.Mooody FB: facebook.com/profile.php?id=100071938663901
Works on blank stainless Steel realy?? Without Paint or Other Things?
Mfg.
Stainless steel, yes
@@AngelMa OK, i Order and Test this on my Chanel.
Looks like a lot of plastic parts.