Used Keg Seal Kit
Вставка
- Опубліковано 5 вер 2024
- A complete replacement for all five o-rings in a ball lock soda keg. This has the large lid sealing o-ring, two ball lock plug o-rings, and two dip tub o-rings. To replace the dip tube o-rings, you will need a deep socket wrench sized for your keg posts.
www.northernbre...
@angryeric116 Under normal use, the seals will last a very long time (all of my kegs at home have seals that are several years old). You should change them when/if they become cracked or non-pliable, or if you use the keg to dispense soda or sour ales with Brett or lactic acid bacteria.
Make sure you note which post is gas and which is liquid. Either one will screw over either tube, and you don't want to have the gas post on the liquid tube!
Nicely Done!
I know this is an older video but what size socket did you use? All of my deep sockets were too small. Thanks!
How Often do you suggest changing out the seals on a keg?
7/8 inch socket for the posts.
Do you recommend food lube on the big ring?
1st off Ryan needs a sandwich, badly. Feed that dude please
2nd....why no talk of lubing? Should be in there.