Double Neck Double Trouble Guitar Headstock Break
Вставка
- Опубліковано 30 лип 2024
- This video outlines how I repaired an Epiphone double Neck SG that I was told 10 other luthiers turned down for whatever reason. As I enjoy a unique challenge I agreed to have the guitar shipped to me from Georgia to work on (after my usual explanation that the money saved on shipping is better put towards paying a local repairer to do the job, but see previous sentence).
The customer had seen how I handled a similar repair in my 2022 video "How to Repair a Severely Broken Headstock"- ( • How to Repair a Broken... .
This video compliments that video, and I had to augment my headstock repair routing jig to accommodate the double neck which gets in the way of everything. In doing so I made my jig far better and able to handle more jobs in a more precise way. Win Win!!!!
For more info on the actual procedure of routing refer to the deep dive 2 hour "How to Repair a Severely Broken Headstock"- ( • How to Repair a Broken... .
In this video I skip over anything I explained in that video such as filing, sanding and fairing in the new wood to old etc.
If you enjoyed this video please SUBSCRIBE, LIKE and COMMENT to help my channel grow which helps me make more content
If this video helped you, consider saying thanks with a super thanks (just like giving a tip)
Products used:
Articulating paper- amzn.to/3SSSfxz
CA Glue- stewmac.sjv.io/m5BmBX
Mixol Pigments (Stewmac no longer sell the white/black pigment I use in the video- stewmac.sjv.io/XYqeRo
Mohawk Ultra-Flo Clear Lacquer, Clear Gloss Finish, M102-0450-amzn.to/3ODKusX
I created an extensive categorized list of lutherie Products I use and recommend for various aspects of the trade- check them out here- www.amazon.com/shop/beauhanna...
Stew Mac: stewmac.sjv.io/GjAMbk
⏰ Timecodes ⏰
00:00 Intro and double beau!
1:07 Caul
3:32 Glue neck back together
4:11 First Route
4:31 New Jig Explanation
6:52 Positioning with a Double Neck
9:25 Fine tuning the Depth Tip
9:50 Splint Making, fitting, and gluing
11:53 Center Splint
13:16 Shaping, pore filling
14:10 Talking White on white
15:33 Spraying
18:54 Secret product that comes in handy in tight spots
19:17- A CAVEAT
All sound samples are improvised and don't use any audio effects to enhance tone.
~ I never promote products I don't personally use or believe the quality therein.
This video is not sponsored and may contain product affiliate links which means if you buy something Beau will receive a small commission at no extra cost to you.
#luthier #guitarmaker #beauhannam
~ Luthier of luxury heirloom quality Guitars and Ukuleles ~
WEBSITE: beauhannamguitars.com
FACEBOOK / beauhannamguitarsanduk...
INSTAGRAM: / beauhannamguitars
🎵 Music licensed from Lickd. The biggest mainstream and stock music platform for content creators
S.O.B. by Nathaniel Rateliff & The Night Sweats, lickd.lnk.to/KgaStNID!Beau+Ha...
License ID: Mn9dLZQa9Ye
Try Lickd FREE for 14 days for unlimited stock music and get 50% off your first mainstream track: app.lickd.co/r/914ad2a5fe8348... - Навчання та стиль
You're definitely the kind of craftsman we all hope we can find when a disaster happens. Awesome work!
Hahahha- trouble is, I get everything everyone else passes on! Hahahha
@@BeauHannamGuitars which validates that you are at the top of the food chain of luthiers who can do the work right!
@@jimmieoneal5013 Dude! Ix-nay on the luthier cannibalism.
😀
@@roughcutguitars hahahhah luthiers eating luthiers sound like a cool, very niche horror movie 🍿 !!
This is not a repair, this is art! Insane craftsmanship!
Thanks so much- I guess it’s a bit of both! That art school degree is paying off!!!
Redefines 'Guitar Hero'.
Seriously, it's an absolute joy to watch your process - but dangerously 'enabling' for those of us who share that OCD-perfectionist gene :-)
Hahhahaha- thanks 🙏 😊
It's a delight watching people at the top of their game (you, Ted Woodford, Andy from Japan, etc.). Thank you!
Thanks- I’m friends with Ted but don’t know of Andy- got a link?
@@BeauHannamGuitars ua-cam.com/video/OEpfLK2W850/v-deo.htmlsi=l7ObArP59Q2keVIx
@@BeauHannamGuitars ua-cam.com/video/OEpfLK2W850/v-deo.htmlsi=l7ObArP59Q2keVIx
Cool thanks- watching now. @@ericweissberg1101
check out Stringtech Workstations as well, the attention to detail he has is impeccable
Brilliant, Beau!! First, that jig was superb. If that were my guitar, I'd actually ask you to leave that repair exposed with just the shellac. That was BEAUTIFUL by all counts. Thank you for the share!!
Thank you Sammy. Gotta route away all that bad wood :)
Incredible work Beau! Thank you for making this video to share with all of us. I do admit I watched until the end ONLY to hear Stairway...the disappointment will subside!
HAHAHAH- thanks. I dont think you can play that on youtube without them killing the video??? plus, i cant play it! hahahha-
Looks like a great opportunity for a headless conversion. I was never too crazy about those surfboards size, 12 string headstocks.
Hahah- they are long!
Very cool, Beau! Well done.
Thanks Chris :)
An amazing repair, Beau !! You are a luthier surgeon of unbelievable talent. Thanks so much for sharing.
Thanks Ed . I try
Fabulous work. Well done
Thanks so much Steve :)
So happy to have found your channel! Looking forward to combing through more vids.
That’s about as close to perfection as one could get given its prior condition before you got to it.
Well done! 😎👊 🎸
Thank you and I’m glad you found my channel :). My production is better now then 5 years ago
Wow. That was the first time that I've seen a broken headstock on a doubleneck!! I used to have a mid-70's doubleneck, but it had those huge, ugly "volutes" on the back of each neck. However, I didn't worry too much about my necks snapping off either!!
Hahahha- I saw they are doing a Jimmy page reissue double neck!
Fantastic work, dude!
Thank you kind sir!
Nice work!
Thank you sir Spence!
Superb work with great engineering solutions.
Thanks so much :)
Thank you. Great video.
Thanks- my pleasure
Your videos are awesome .
Thanks- I’m trying to edit them better these days
Brilliant!
Thanks Eb
Top quality repair and results. I owned an Ibanez double neck many years ago. Weighed an absolute ton, so never really used it much. It was great to look at though. One of the many I wish I'd kept.
Thanks- this was a bit heavier of course. I’d buy one for the cool factor for sure- I don’t need one but after this and playing it I want one!
NEW SUB! Your channel is a wealth of information! The way you take the time to explain everything is absolutely fantastic! "Whiter than Vermont" made me chuckle lol. Cheers from Indiana!
Hahahha- thanks :) My newer videos form the last few years are way better quality then the older ones (but thats the same for everyone usually) . thanks again.
Awesome repair! F... the paint!!🤣🤣🤣🤣🤣🤣🤣🤣🤣😎😎
Hahahahha thanks
Wow he makes it look so easy,I had an epiphone g-1275 custom double neck and I dropped it and broke the twelve string headstock ,never sounded the same wish epiphone still made them good guitar
Sorry you broke you guitar and I hope you got it fixed well.
Brilliant job. 👍😎❤️👍🏿🙏🏼🥂
Thank you 😊
First thought was “Of course, the 12-string head broke off.
Hahahha- it had to be that one! Hahaha
Nice job. Love the versatility of your router jig. I'm not sure that I buy that the solvent in the topcoat disturbed the color coat if was sealed with a few coats of polyurethane. Are you using 2K or single shot poly? I also doubt that the pigment in the wood is going to migrate through the CA film. Is it possible that the color wasn't quite opaque but it wasn't noticeable until the gloss topcoat was on? Watching on my phone I can't see the issue. The repair looks really good. Nice editing too.
Thanks. I used twonpart urethane from Cardinal. When I sprayed the color on, the new wood showing through was definitely not there. Then it was there after a few days. One day I redo the rest on scrape and see what happens.
When feeling your work with your eyes closed, put a piece of paper towl under your fingers. It will help you feel something your fingers cant. Dont ask me how it works.
Really??? I’ll try that, thanks 😊
I would call that Fregato.
Hahaha- I had to google that one
Fantastic 😃🙋🏻♂️🇧🇷🇧🇷🎸🔥👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Thanks
I feel like the shellac is the culprit in terms of the yellowing. I don't think the spirit shellac forms an impermeable barrier. So it's possible the tannins did bleed through. and the lac itself leached its amber colour through the nitro finish which would have reactivated the shellac.
Quite possible. I did CA glue over it though. One day I’ll figure it out!
Could the acetone base of the CA glue have drawn up the tannins? I've sealed raw wood wth acrylic laquer and then used nitro cellulose over that.
@@woohoolabtheory maybe- it’s all up in the air at the moment. A lot of layers to be confused by! Hahahh I’d love to experiment with this
I've used same-species wood and CA for smaller repairs than this, but always used Timberate for an overall porefill. Don’t always like how it 'imposes' its own hue on the finish though. Was going to try Aqua Coat per Robbie's endorsement (hate dealing with epoxy-based stuff). Now I'm wondering about this as an overall job. Not sure how practical that would be - amount of product, toxicity, sanding, how it receives top coat on a natural finish. Thoughts?
I don’t think the pore filler material matters at all if it’s an opaque color (it matters if it’s a clear coat or cherry burst kinda thing)
@@BeauHannamGuitars Right, that's why I'm pondering for natural finishes - meaning the plain wood - no color, no burst, but not feeling any grain friction.
That's been difficult w Timbermate - leveling the applications and teying to get the bulk off so it doesn't keep tinting the wood but risks re-opening the surface to feeling friction. I think that much CA will just be too nasty to deal with. Have high hopes for Aqua Coat.
If you wipe a thin coat of shellac on the wood before you grain fill you can minimise the pore fill staining the wood surface - but sometimes you need that to get "the factory look" @@roughcutguitars
one would think ANY double neck guitar would have a problem with alignment of the 2 necks , is this a problem or dont buy one until ya try it out ?
The alignment wasn’t the problem (the necks were where they should be). It was just the headstock that broke
I almost choked at 'son of a bitch' moment xD Liked, sub'd!
Hahahhaha/ I had that song in mind when I filmed it the first day, so I based the entire intro around the song!
@@BeauHannamGuitars And it hits the right spot)
My brother just bought a Gibson EDS1275 double-neck over the past summer. That poor soul paid well over $7,000.00 for it. *Yikes.
Sounds like a lot but I have no idea what guitars are worth these days
Oh yeah, it's a good chunk of U.S. greenbacks to buy Gibson's version of the EDS-1275 double neck guitar!!
The music is so unnecessary and annoying.
So is this comment 😉