Tips. Very important if you would like to saw with precision. (avoid torsion as much as possible)! Always choose a Miter saw with a handle positioned in a vertical line above the saw blade. Everything must be aligned, slide rails, handle, and saw blade,it is much better this way the blade will not tilt. Because there is some torsion in the aluminum housing . And choose an engine with softstart on it to prevent wear of the gear and worm shaft. It is very important that everything is aligned. Here are some examples to show how the handle must be positioned above the blade. Bosch gcm 800 sj / Bosch gcm 8 sjl / Evolution rage 3 / FESTOOL KS 60 / HITACHI C12RSH2 / FESTOOL KS 60 E KAPEX / Metabo KGSV 72 Xact (This also is the case with the Miter saw without the slide rails). If you want you can test it yourself at home if there is torsion in the aluminum housing. Step-1. First you make a saw cut from +-5 mm deep in to a flat piece of wood about +- 20 mm thick. To this with the normal handle positioned on the right side of the Miter saw. Step-2. Then repeat this by pushing the saw blade down with your hand (finger) on the aluminum protective cover were the saw blade is cased in. Just now only do this without the running engine. Step-3. Now you can see if the saw blade will be positioned in or next to the saw cut. If the saw blade is (+- 0,2 / 0,5 mm) next to the saw cut then there is torsion in the aluminum housing. Step-4. therefor it is much better to choose a Miter saw with the handle positioned vertical in line above the saw blade. Conclusion: how further away the handle is from the saw blade how more chance of torsion in the aluminum housing.
Скажите, почему у данной пилы разные высоты у платформы которая вращается и у платформы которая статична? Вращающаяся платформа несколько выше. Это брак конструкции или так задумано?
Сколько посмотрел обзоров про эту пилу и не одного что она в двух вариантах выпускались, тоесть с разным распаложением клавиш, неужели никто не заметил!!!!?
Отличная!!! Коробку запиливать не шире 80 мм., а неделю назад закончил собирать лестницу, ступени дубовые толщина 50 мм ширина 350 мм.- справляется отлично!!!!
пила прикольная...видео тоже...можно использовать КАК НЕЛЬЗЯ пользоваться пилой если хочешь до старости сохранить все пальцы. :-)
😀 пальцы срезать под углом 45 гр. 👀
пила просто ОГОНЬ!
Tips.
Very important if you would like to saw with precision. (avoid torsion as much as possible)!
Always choose a Miter saw with a handle positioned in a vertical line above the saw blade.
Everything must be aligned, slide rails, handle, and saw blade,it is much better this way the blade will not tilt.
Because there is some torsion in the aluminum housing .
And choose an engine with softstart on it to prevent wear of the gear and worm shaft.
It is very important that everything is aligned.
Here are some examples to show how the handle must be positioned above the blade.
Bosch gcm 800 sj / Bosch gcm 8 sjl / Evolution rage 3 / FESTOOL KS 60 / HITACHI C12RSH2 / FESTOOL KS 60 E KAPEX / Metabo KGSV 72 Xact
(This also is the case with the Miter saw without the slide rails).
If you want you can test it yourself at home if there is torsion in the aluminum housing.
Step-1. First you make a saw cut from +-5 mm deep in to a flat piece of wood about +- 20 mm thick. To this with the normal handle positioned on the right side of the Miter saw.
Step-2. Then repeat this by pushing the saw blade down with your hand (finger) on the aluminum protective cover were the saw blade is cased in. Just now only do this without the running engine.
Step-3. Now you can see if the saw blade will be positioned in or next to the saw cut. If the saw blade is (+- 0,2 / 0,5 mm) next to the saw cut then there is torsion in the aluminum housing.
Step-4. therefor it is much better to choose a Miter saw with the handle positioned vertical in line above the saw blade.
Conclusion: how further away the handle is from the saw blade how more chance of torsion in the aluminum housing.
полезная информация
Просто супер 🖒
Дима, реально такой металлический профиль кроить, если поставить отрезной диск по металлу тонкий?
Здравствуйте! Обзор огонь, только за пальцы ваши переживал :) Рассматриваю к покупке данную (BOSCH GCM 8 SJL) торцовку. Подскажите, ваша жива? Как впечатления? Рекомендуете?
Огонь!))))
есть ли люфт направляющей при при полном выдвижении пилы?
Пластиковый низ,ячейки,где фиксируется поворотный стол,не разбивается,съедается со временем?
Подскажите, почему пила останавливается до начала пиления и во время . Мычит
Плата константной электроники перегрелась или тупит.
Пила nice только не пойму почему у тебя все пальцы на руках целы???
Все 9 на месте)))
@@SAPER38 хорошо, ставлю вопрос иначе - почему ещё 9? Не помню на какой минуте видео я даже дар речи потерял от увиденного 😀
@@SAPER38 нашёл на 11.10 просто красавчик.
@@SAPER38 🤣 10-ый палец (срез под углом) в проспиртованной банке? 🤔
I am thinking about buying this saw - are you still happy with it ? Is it precise ?
I am very happy with it !!!I do not regret that I bought it!
Здравствуйте! Ну как пила со временем не разочаровала? Хочу купить такую же .
Я полностью доволен!
Скажите, почему у данной пилы разные высоты у платформы которая вращается и у платформы которая статична? Вращающаяся платформа несколько выше. Это брак конструкции или так задумано?
задумано зачем то
Сколько посмотрел обзоров про эту пилу и не одного что она в двух вариантах выпускались, тоесть с разным распаложением клавиш, неужели никто не заметил!!!!?
Safety First
Скажите пожалуйста. Доску толщиной 50 мм я смогу отпилить под наклоном 50 градусов?
Ширина доски какая?
20 см с лёгкостью!
@@SAPER38 ширина не причём. Толщина 50 мм. В характеристиках написано пропил 48 мм под наклоном. Значит 2 мм идёт недопил.
@@ДмитрийИванов-ь3о3п Ааа)))Вы имеете в виду вертикальные 50 радусов)))Ну тут не подскажу-не пробовал)))
Здравствуйте, скажите торцовка для установки дверей подходит хорошо и запихивает багетов ?
Отличная!!! Коробку запиливать не шире 80 мм., а неделю назад закончил собирать лестницу, ступени дубовые толщина 50 мм ширина 350 мм.- справляется отлично!!!!
походу ты сметрник, так работать с такой пилой