There is a small set screw that attaches the inner cable to a bracket above the carb linkage. Then the whole cable should be able to be removed. If you pause this video, you should be able to see the screw in question. ua-cam.com/video/oKAE65xNmeA/v-deo.html
your videos are extremely well done and much appreciated
Just about to do this on my MGB. Thanks for the informative and detailed video.
Hey! Where did you get the small springs for the adjustment screws?
It's been a while, but if I remember correctly, I picked up a multi pack from Home Depot.
How would i remove the choke cable from the carburetor?
There is a small set screw that attaches the inner cable to a bracket above the carb linkage. Then the whole cable should be able to be removed. If you pause this video, you should be able to see the screw in question. ua-cam.com/video/oKAE65xNmeA/v-deo.html
Did the poppet valve break off in the process of removing the throttle plate or did it get ingested?
Mine were originally soldered onto the throttle blade, but came out with all the smashing and bashing required to remove the throttle blade.😅