I got the f33 but honestly I like the body of the f32 a bit better. I just installed the gts lights. Today I'm gonna install cts turbo intake today. Can't wait to hear how it sounds
my M435 i has carbon headlamp eyebrows which as my car is black makes the front end more aggressive. surprised you did not go for carbon side skirts and carbon rear skirts. inside i put door handle carbon clip on' s, gives the handle a more chunky feel with that carbon look.
I want some of your input. Still a reliable car? I just picked up a 2015 435i xdrive convertible with 43,500 km and I need to decide whether to get the extended warranty for it or not. The warranty is CAD $4,000 for 4 years, CAD $500 deductible every time it needs fixing (so not useful if the fix is under $500), but it covers almost everything except for the wearables. If no claim after 4 years, I get CAD $1,500 back
Hey man, just my personal opinion here but I wouldn’t get the warranty. The only main issues I had with this car are the charge pipe, coolant leak, valance cover leak and a blown strut from hitting a really bad pothole. Most of those issues except the strut which was my fault, only costar da few hundred
Are you running any spacers? My tires and wheels setups are Front: 235/40/18 8.5 +35 Rear: 255/40/18 9.5 +35 it’s lowered with H&R Sport front 1.3” rear 0.7”. The rear has a little poke which I do like but the front not as flush with the fenders as I want it to. I want to run spacers up front only but worried it might rubbed. Just curious if you’re running spacers, if so what size without rubbing issue? I had no issue with rubbing when I was running with stock wheel/tire setup 225/45/18 8J with 12.5mm spacers. After having new wheel/tire setup mentioned above, a technician told me it will rubbed if I left 12.5mm spacers up front. Long story short, just need to know in your opinion or experienced, what size spacers up front needed without rubbing with 235/40/18 8.5 +35 with 1.3” drop. Thanks for advance and for those who can chime in.
when you say it was a pain installing , on a scale 1-10 how difficult? because i saw some videos and it looks pretty simple. unscrew the screws at the bottom and pull it off. i ask because im about to buy one and they trying to charge 200$ .. feel like i can do it myself .
So I actually never got a CEL from the intake. Only once because I didn’t tighten it enough but that went away. I coded out the CEL from the downpipe with the tune
On these cars you have to program the new battery after installing it. You can use the BimmerLink app along with a OBD port Bluetooth adapter. The guy at Inline Six Auto did a great video about it
This guy is very underrated he makes very good content on his bmws
Thank you man that means a lot!
2 years later and it still looks epic
I got the f33 but honestly I like the body of the f32 a bit better. I just installed the gts lights. Today I'm gonna install cts turbo intake today. Can't wait to hear how it sounds
It’s a shame the car gonna be gone… woulda loved it for myself.. but new things for the channel and I honestly can’t wait!
It’ll be gone but not far 😉. But thank you! I appreciate you understanding
The mirror caps look a bit too aggressive for the body, but they still look pretty good 👍🏻, car flows well with all the upgrades you did
I see your point. I know some people like just the normal ones. But thank you man, I really appreciate that!
my M435 i has carbon headlamp eyebrows which as my car is black makes the front end more aggressive. surprised you did not go for carbon side skirts and carbon rear skirts. inside i put door handle carbon clip on'
s, gives the handle a more chunky feel with that carbon look.
That side marker would look amazing tinted to match the side fender vent
I want some of your input. Still a reliable car? I just picked up a 2015 435i xdrive convertible with 43,500 km and I need to decide whether to get the extended warranty for it or not. The warranty is CAD $4,000 for 4 years, CAD $500 deductible every time it needs fixing (so not useful if the fix is under $500), but it covers almost everything except for the wearables. If no claim after 4 years, I get CAD $1,500 back
Hey man, just my personal opinion here but I wouldn’t get the warranty. The only main issues I had with this car are the charge pipe, coolant leak, valance cover leak and a blown strut from hitting a really bad pothole. Most of those issues except the strut which was my fault, only costar da few hundred
Looks amazing, what’s the offset on your rims?
Are you running any spacers? My tires and wheels setups are Front: 235/40/18 8.5 +35 Rear: 255/40/18 9.5 +35 it’s lowered with H&R Sport front 1.3” rear 0.7”. The rear has a little poke which I do like but the front not as flush with the fenders as I want it to. I want to run spacers up front only but worried it might rubbed. Just curious if you’re running spacers, if so what size without rubbing issue? I had no issue with rubbing when I was running with stock wheel/tire setup 225/45/18 8J with 12.5mm spacers. After having new wheel/tire setup mentioned above, a technician told me it will rubbed if I left 12.5mm spacers up front. Long story short, just need to know in your opinion or experienced, what size spacers up front needed without rubbing with 235/40/18 8.5 +35 with 1.3” drop. Thanks for advance and for those who can chime in.
Your tire diameter difference is -1.2%. Have you noticed any issues? I’m planning on doing 235/40 and 265/35
Nice one mate ‼️😎
Great channel 👍
@@mathemarsa thanks appreciate the feedback! Glad you love it ❤️
Thank you brotha! Hopefully one day both of our channels blow up!
@@ayyyman_ yeah 🙏
Hey bro I have the base model 435i but wanted to make sure that the m sport side skirt extension would work on it
hey brother, you still have those forged carbon fiber mirror caps?
Hey hows it going? I also live in NYC, how are tints and cops in general? Do you get pulled over often? Love your car btw! Thanks!
Thank you bro! I didn’t drive the car too much on the road after timing it but didn’t really get much trouble for it.
The quality on this vid is so crisp, what camera are you using?
Thanks man! It’s nothing crazy, just the Sony ZV-E10 with the kit lens and an ND filter
2015 beamers were so beautiful and mean looking
I agree. 2015 was a great year for BMW and all their models
when you say it was a pain installing , on a scale 1-10 how difficult? because i saw some videos and it looks pretty simple. unscrew the screws at the bottom and pull it off. i ask because im about to buy one and they trying to charge 200$ .. feel like i can do it myself .
For which part?
Do you have a CEL on constantly due to the down pipe and intake, or were you able to code those out somehow?
So I actually never got a CEL from the intake. Only once because I didn’t tighten it enough but that went away. I coded out the CEL from the downpipe with the tune
Such a nice car 🙌🏻
Thank you broski! I’m hoping I can follow in your footsteps and get an M car next
Beautiful car my man
Thank you brotha!
Please make a maintenance video on the 4 series bro......appreciate!
I gotchu bro!
hey bro can u help i just put a new battery on my 435i but there no power what so ever do u know what could it be
On these cars you have to program the new battery after installing it. You can use the BimmerLink app along with a OBD port Bluetooth adapter. The guy at Inline Six Auto did a great video about it
@@ayyyman_ but the car don't turn in how can I connect to it???
Love this car
how old are you bro?
what year model is this?
2015
and what size wheels do you run?
how have you only got 3k subs
Hopefully one day we’ll have much more!
Hey man I finally got to see the 435i at Mpact yesterday was trying so hard to find you😭
Ah man, I was probably walking around. Message me on IG next car show!
💯💯
👊🏼
Keep up the good work man your videos are soooo cool , an very helpful with all the information you give out 😈😎😎 @ayyyman
how old are you bro?