First of all thank you for this videoI. I am trying to follow your video to adjust my Governor on YTH 22v46 Husqvarna (22HP Briggs & Stratton engine. Following your example but no luck. Every time I start engine it rev's real high so I have to immidiately to shut down before it goes in full overspeed and destroys it's self. What is my next step? Take engine a part and inspect/replace governor? Or any other suggestions... Thank you again for your video and any help is very much appriciated.
Thanks for the video....I have a problem with a V Briggs where I slackened off the govenor lever to gain access to put new springs on and now it only revs high...I believe ive tried many combinations and the engine revs high still...any thoughts?
@@outdoorpowertech7738thanks, I visually matched the springs as correct and were bought from a garden machinery supplier using the engine numbers...the governor spindle clicks left and right like in your video when loosened off....il try again with your approach
Thank you. Finally someone made a video on adjusting a governor without making you feel you need to be a master mechanic to do so. Thanks again. 👍
Thank you! Husqvarna YTH22v46 owner here. This is the best video on UA-cam for adjusting this Briggs engine!
Appreciate your time explaining this, saved me a lot of time....
No need to run it wide open unless you need it in heavy grass
😊
First of all thank you for this videoI. I am trying to follow your video to adjust my Governor on YTH 22v46 Husqvarna (22HP Briggs & Stratton engine. Following your example but no luck. Every time I start engine it rev's real high so I have to immidiately to shut down before it goes in full overspeed and destroys it's self. What is my next step? Take engine a part and inspect/replace governor? Or any other suggestions... Thank you again for your video and any help is very much appriciated.
Yes if it still revs after doing this you most likely have bad governor
@@outdoorpowertech7738 Thank you!
Can the governor inside the engine brake as I've got one that is reving to high its like the governor won't shut down
Yes it can
Thanks for the video....I have a problem with a V Briggs where I slackened off the govenor lever to gain access to put new springs on and now it only revs high...I believe ive tried many combinations and the engine revs high still...any thoughts?
If it’s set right and still rev then you spring might be wrong or governor is broke inside engine.
A spring that’s to stiff
@@outdoorpowertech7738thanks, I visually matched the springs as correct and were bought from a garden machinery supplier using the engine numbers...the governor spindle clicks left and right like in your video when loosened off....il try again with your approach
@@outdoorpowertech7738 thats very kind thank you , the engine is 40R577-0015-H1....the spring set I got was Briggs 594915
Would this possibly solve a surging engine? If not what would you suggest. Thank You for your time!! 1:25
Most likely a carburetor problem, slowly pull your choke out while it’s running and if it clears up it’s your carburetor.
Riding lawn mower.