P.I.M. - Introducing our CO2 Inflator Kits for MTB and road bikes

Поділитися
Вставка
  • Опубліковано 12 вер 2024

КОМЕНТАРІ • 26

  • @fjodorgrigorow3851
    @fjodorgrigorow3851 4 роки тому +1

    Thank you Guys! Nice work and supercool product!

  • @siebert12
    @siebert12 2 роки тому +4

    Any chance in making one that doesn't require threading onto the valve? I've had some bad luck with the core coming back off, after inflating, leaving me with an empty tire.

    • @Aiden.K
      @Aiden.K Рік тому

      yeah that can easily loosen up valve core...

    • @manoz6194
      @manoz6194 8 місяців тому

      Just make sure your valve core is tighter than you screw in the inflator. It is better to have the inflator slightly lose, you may lose some CO2 but you won't undo your valve core. I have valve caps which are also valve core spanners so I can quickly tighten the valve before connecting the inflator

  • @g.yummysstory4389
    @g.yummysstory4389 4 місяці тому +1

    You guy’s product ’Bam’ could using with this kit? I can’t use ‘bam’ directly, because I’m e-bike user. Big hub motor is in rear hub.. so I couldn’t use ‘bam’ by perpendicular with tube nozzle. (No space there for putting can) maybe this kit is becoming solution for using ‘bam’.

    • @mucoffltd
      @mucoffltd  4 місяці тому

      We'll have a word with the in-house boffins

  • @petartodorov5046
    @petartodorov5046 4 роки тому +1

    Can we use it for clinchers or no? I dont think that it is only for tubeless...
    Thanks!

  • @florianrademacher7472
    @florianrademacher7472 2 роки тому

    Does it work with Schwalbe Aerothan tubes?

  • @superyamagucci
    @superyamagucci Рік тому +1

    Put on your safety glasses.
    Never use compressed air at eye level.

  • @illgazillion
    @illgazillion 3 роки тому +1

    How long will the CO2 last once the top is put on. Let’s say I screw the cartridge in to the valve but don’t use it right away. How long will the CO2 stay inside?

    • @mucoffltd
      @mucoffltd  3 роки тому

      Hey! You should use the whole cartridge once you screw it in. You can purchase replacement cartridges to ensure you make full use of the kit! Thanks//Muc-Off

    • @eBlakeston
      @eBlakeston 3 роки тому

      But how long will the co2 stay in standby while screwed in

    • @1spiders1
      @1spiders1 3 роки тому

      @@eBlakeston they won’t Ansa

    • @antaoalmada1475
      @antaoalmada1475 3 роки тому +1

      @@mucoffltd Can I transport the adapter screwed in to the cartridge? Will it leak? Do I have to transport them separately and risk loosing the adapter?

    • @MrKeefy
      @MrKeefy 2 роки тому +1

      @@antaoalmada1475 screw a nut on the canister first then screw the valve on top.

  • @mackellarboy7
    @mackellarboy7 3 роки тому

    Who used this to go tubeless ?

  • @karansaraf87
    @karansaraf87 3 роки тому +1

    Presumably this works with any CO2 canister, not just Muc Off ones?

    • @mucoffltd
      @mucoffltd  3 роки тому

      Hey Karan- we can only confirm that our cannisters are compatible. You would need to check with other manufacturers for sizing!

    • @pabloc106
      @pabloc106 3 роки тому +1

      Any threaded canister works

  • @draugmithrin
    @draugmithrin 4 роки тому +1

    Why not use nitrogen? Pure oxygen will leak out of a tire 3-5 times faster than pure nitrogen, because of oxygen's smaller size. But carbon dioxide will leak out much faster than that, up to 12 times faster than nitrogen.

    • @CarkeekW
      @CarkeekW 4 роки тому +1

      Cost i expect

    • @coffeepot3123
      @coffeepot3123 4 роки тому +8

      It's just a temporary thing to get you home.

    • @phillyphan595
      @phillyphan595 10 місяців тому +1

      who is pumping pure oxygen into their tires...?

  • @bikerboy1993
    @bikerboy1993 2 роки тому +1

    Yh al remember that tae empty the canister be4 taking the canister off 😂😂😂😂 a only used 1 the other day for the vry first time learn by ur mistakes lol it goes off with sum bang lets just say that 😂😂😂😂