That's what I originally thought also, but the sovol nozzle is slightly longer. You could use volcano nozzles, but would have to modify the cooling fan duct and probe placement.
Yoo my printer when I try to level it just keeps going down until it eventually touches the bed and it still tries to go down I don’t know why you know how I can fix this ?
Contact Sovol or whoever you purchased the machine from (if you haven't already) and they can help you and possibly send replacement parts if necessary. It sounds like your z probe/sensor isn't working.
The SV-07 print quality is abysmal, I would hold off on getting one until this issue gets fixed, either by Sovol or the community, Im pretty upset by this as despite not owning a Sovol printer I have followed their progress and was somewhat wowed by their policy of taking existing open source designs and in most cases improving and upgrading them and still managing to sell them cheaper than the original machine, I stopped buying bed slingers and bought Ender 5 Plus machines and also built a Pro 3D V-King 400 from self sourced very best quality parts and its an awesome machine! and IMO is much better than the kit built Vorons and their dodgy quality parts.
Good question. Sorry I don't have a good answer. It depends, so I don't know. Going just off of the recommended print speed of 250mm/s on the SV07 vs the 150mm/s of the SV06 plus, not quite twice as fast at the points of the model where it is actually printing that fast (typically the infill). So even if it was printing 300mm/s, it isn't necessarily going to print the same model in half the time. On Sovol's site they show a comparison of a benchy done on the SV07 at 250mm/s and 500mm/s and the print times (about 24mins at 250mm/s and 14mins at 500mm/s)
@@geek-happens Thank you for taking the time to answer my question. I decided to hold off. I'll probably get the Elegoo Neptune 4 pro or maybe the Bambu Lab P1P. I don't know what to get really. The print volume is nice on the SV06 Plus, but I want decent speed also.
I believe those nozzles are the same as the E3D volcano nozzles.
That's what I originally thought also, but the sovol nozzle is slightly longer. You could use volcano nozzles, but would have to modify the cooling fan duct and probe placement.
Yoo my printer when I try to level it just keeps going down until it eventually touches the bed and it still tries to go down I don’t know why you know how I can fix this ?
Contact Sovol or whoever you purchased the machine from (if you haven't already) and they can help you and possibly send replacement parts if necessary. It sounds like your z probe/sensor isn't working.
The SV-07 print quality is abysmal, I would hold off on getting one until this issue gets fixed, either by Sovol or the community, Im pretty upset by this as despite not owning a Sovol printer I have followed their progress and was somewhat wowed by their policy of taking existing open source designs and in most cases improving and upgrading them and still managing to sell them cheaper than the original machine, I stopped buying bed slingers and bought Ender 5 Plus machines and also built a Pro 3D V-King 400 from self sourced very best quality parts and its an awesome machine! and IMO is much better than the kit built Vorons and their dodgy quality parts.
How slow is this, in reality, compared to the SV07?
Good question. Sorry I don't have a good answer. It depends, so I don't know. Going just off of the recommended print speed of 250mm/s on the SV07 vs the 150mm/s of the SV06 plus, not quite twice as fast at the points of the model where it is actually printing that fast (typically the infill). So even if it was printing 300mm/s, it isn't necessarily going to print the same model in half the time. On Sovol's site they show a comparison of a benchy done on the SV07 at 250mm/s and 500mm/s and the print times (about 24mins at 250mm/s and 14mins at 500mm/s)
@@geek-happens Thank you for taking the time to answer my question. I decided to hold off. I'll probably get the Elegoo Neptune 4 pro or maybe the Bambu Lab P1P. I don't know what to get really.
The print volume is nice on the SV06 Plus, but I want decent speed also.