You absolutely do not need an installation kit. The Kickers mount perfectly on the existing mounting studs. Just unbolt the old speakers, place the Kickers over the old mounting studs, secure then with the original sheetmetal nuts. Wire them up and enjoy. They sound great. I just did this on my 1987 YJ.
Looks like a lot of work, I folded my window took dash loose had much more room with no need to drill at all. I can see how this kit would work for someone who doesn't want to go through that. In my opinion it is easier just to loosen dash though, good video I'm sure its going to help many with questions.
I'm sure this way is best for you and others. However, since my windshield on my 91 folds down pretty easily, I'll do it that way. If a windshield does not fold down as it's never been down, PB blaster or WD40 in the holes on the hinge , along with tapping being and careful not to hurt your paint, works fine most of the time. On my 88, since I was replacing the bracket for a stainless steel one, I used a plumbers torch, lube, and a brass hammer until it freed up. Wala, windshield down, replaced that gasket under it while it was accessible, (they leak eventually), and new marine type speakers sound great! Good luck!
Great video and very informative. Not sure what's up with some of these other comments. Of course you can fold your windshield or unbolt your entire dash.... but I sort of doubt that would be easier unless you have gigantic sausage fingers and can't get your hands up behind the sheet metal, which if that's the case I understand. Another big + about this kit is should you toast one of these speakers it will be much easier to replace in the future.
I'm confused why can't you just take off the windshield and take the entire speaker plate off ? I just got my YJ and the previous owners ghetto rigged the sound system to put in a kicker bass behind the seats . it was kind of cool bye added a lot of weight got in the way and the amp was on the floor just not good for things I'm going to do in the Jeep .
For me it was about the time and cost. Wasn't looking for a huge investment and wanted it done quickly. The speakers also sound really good for the price.
Why are you out of breath the entire time?.. kind of hard to want to keep watching, but it’s much easier to just loosen the dash then to do everything blindly and squeeze your hand back there the entire time.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
You absolutely do not need an installation kit. The Kickers mount perfectly on the existing mounting studs. Just unbolt the old speakers, place the Kickers over the old mounting studs, secure then with the original sheetmetal nuts. Wire them up and enjoy. They sound great. I just did this on my 1987 YJ.
Looks like a lot of work, I folded my window took dash loose had much more room with no need to drill at all. I can see how this kit would work for someone who doesn't want to go through that. In my opinion it is easier just to loosen dash though, good video I'm sure its going to help many with questions.
Nice video, thanks for posting. Was looking for a video on removing the dash but this may be easier.
Great video. The speakers in my YJ are toast. I bought some Polk speakers to toss in there
I'm sure this way is best for you and others. However, since my windshield on my 91 folds down pretty easily, I'll do it that way. If a windshield does not fold down as it's never been down, PB blaster or WD40 in the holes on the hinge , along with tapping being and careful not to hurt your paint, works fine most of the time. On my 88, since I was replacing the bracket for a stainless steel one, I used a plumbers torch, lube, and a brass hammer until it freed up. Wala, windshield down, replaced that gasket under it while it was accessible, (they leak eventually), and new marine type speakers sound great! Good luck!
Great video and very informative. Not sure what's up with some of these other comments.
Of course you can fold your windshield or unbolt your entire dash.... but I sort of doubt that would be easier unless you have gigantic sausage fingers and can't get your hands up behind the sheet metal, which if that's the case I understand.
Another big + about this kit is should you toast one of these speakers it will be much easier to replace in the future.
I'm confused why can't you just take off the windshield and take the entire speaker plate off ? I just got my YJ and the previous owners ghetto rigged the sound system to put in a kicker bass behind the seats . it was kind of cool bye added a lot of weight got in the way and the amp was on the floor just not good for things I'm going to do in the Jeep .
Hey if you don't mind me asking where did you get that angry eye bar for your yj over the headlights and grill?
Out of Puerto Rico, a guy on the island manufactures them one at a time.
+VT Bales did you make any adjustments to install the grill
No not really, fits over the existing.
VT Bales does he have a website orr wat?? how did u order it?
Puerto Rico, he doesn't sale on line. I knew someone who knows him.,hard to get.
Hey where did u get your grille overlay? I just got one and can't figure out how to fit it any help?
Did you ever get yours to fit
Great video thank you !
are these water resistant?
No I don't believe so. all open wiring.
bro where did u get that grill from?
aram arsenyan ebay 325
Great video.
That's pretty cool, unfortunately those speakers only about $50 so it's hard to justify another 100$ for a drill bit and a template.
For me it was about the time and cost. Wasn't looking for a huge investment and wanted it done quickly. The speakers also sound really good for the price.
Why are you out of breath the entire time?.. kind of hard to want to keep watching, but it’s much easier to just loosen the dash then to do everything blindly and squeeze your hand back there the entire time.
huh