WL Toys A959 Upgraded Suspension Arms
Вставка
- Опубліковано 8 вер 2024
- Hello and welcome to the next video in this little upgrade series of the WL Toys A959. In the last video, I upgraded the drive shaft, drive gears, reduction gear, and motor gear all to metal. I am continuing where I left off from that video and in this video I will be upgrading the suspension arms all to metal. Below is a link to where you can purchase everything used in this video:
WL Toys A959 Buggy Blue: www.banggood.c...
amzn.to/2ZiplIi
WL Toys 1959 Buggy Red:
www.banggood.c...
amzn.to/2HdHL6L
Hobbypark Front & Rear Aluminum Steering Hub Base C Carrier Knuckle Upgrade Kit: amzn.to/2LaFRWH
Upgrade Metal Parts Package Suspension Arm Steel Ring Wheel Hub - Blue: www.banggood.c...
Suspension Arms: www.banggood.c...
amzn.to/2PnqFtB
Metal Upgrade Rear Hubs: www.banggood.c...
Metal Upgrade Steel Ring Hubs: www.banggood.c...
Metal Upgrade C Seats: www.banggood.c...
Now that was a bunch of parts added this time.The stock buggy is already a lot of fun.
Ron Ralph's son it was the most involved upgrade I did so far. Glad to hear you’re having some fun with yours.
My stock shocks did allow for oil. Just unscrew the tops as normal
UltimateWarrior206 I was going to just do that but I wanted to upgrade to the cool looking blue metal shocks instead.
@@ReadytoRunRC did u use any washers on the parts. Find there is play with the metal ones.
UltimateWarrior206 I did not. I haven’t had too much play with anything metal I installed.
esta quedando todo un monstruo...
German Garces No puedo esperar para volver a juntarlo todo
Very nice man. Looking good👍👍
Thank you Kenny!
Why does everyone's tires look brand new? Mine look like racing slicks after 40 battery runs. 😕
Great content, subbed your channel! 😉👍
Thanks for the sub! Glad you enjoyed the content.
brother i have aa problem to build this a979 all metall rc car, could you please help me ? when i spin and turn my a979 ( teel wheel axle) then this stuck with dogbone please tell me what the reason ???
I know this video is old, but a while back I got a full set of aluminum upgrade parts and have been slowly upgrading as needed. I found one small issue with the rear suspension arms though. The stock screws (m2.5x17 round screw) aren't the correct thread for the aluminum arms. Did you have issues with this or did your arms come with new screws. Mine did not come with these.
The stock screws are meant for screwing into plastic so it so does have a different thread pattern than what’s used for screwing into metal. The arms I got in this video came with the correct screws I needed to screw into the aluminum.
@@ReadytoRunRC Were they fully threaded or just the end by the head like the original? I think I'll have to source some. They look to be M2 threads I think?
I'm just getting into RC cars at age 41 hehe,I have just ordered this model as I heard some great things about it as it's highly upgradeable and great out the box anyway.
I have a very noobie question from someone that knows bugger all about cars in general let alone RC cars hehe but is there a way how to increase the height of the suspension so ground clearance is much higher for off-road,also what tyres would anyone recommend for great traction but also for offroading.
Cheers in advance for any advice anyone would be happy to help with.
Nothing wrong with being 41 and into RC’s. I’m 41 as well. It is a very upgradeable RC and a solid choice for a budget hobby grade rc to get yourself into the hobby.
You can raise your height by getting some bigger wheels and tires which I did that. If you look through my videos you will see the wheel tire upgrade I did to this. Also changing the stock shocks for adjustable aluminum shocks would help too. This car does ride a little low from stock so raising the ground clearance was a must for me.
I'm waiting to see someone throw some alternate a arms from something bigger on it ! This thing is so cool ! I build the tmaxx supermaxx trucks but the parts are hard to find and very expensive ! I have 600$ in the bulkheads and diffs alone in one of them ! I had to find something cheaper to "play" with ! Lol! Very relaxing hobby .And this has become my new favorite for the moment ! I'm currently waiting on the brushless setup to arrive .just the basic 50$ upgrade with motor esc transmitter and 25a receiver .After doing more research I should have just bought the motor and esc .oh well live and learn ! BTW I'm 52 And love this hobby !
nice:) got a new sub. i have 4 cars i upgrade to metal. but the srew fall of all the time. but i see you use some glue/grease thing before you srew it together. where can i buy that and most i use that? can you please link me to a place where i can buy that thing? :9 sry for my english!
Titten Tei I am using a product called Loctite. You should use it. After you put the screw in, it will dry and secure the screw so it doesn’t come back out. You can get that at any hardware store, hobby shop or even on Amazon. Hope you can find some so your screws don’t keep falling out. Thanks for the sub!
@@ReadytoRunRC thank you very much mate. 🙂 Then i gonna buy tomorrow. 😊
Should’ve added ball bearings
Aaron Emberson probably should’ve. It’s never too late.
If you havent yet, never buy uruav chassie it comes with wrong screws
Nope I haven’t. Good to know for when I do upgrade the chassis.
I need help my hub caps aren't long enough and the dogbone on the right side keeps coming out
Not sure without seeing it what your problem is with the dogbone.
They come out of the hub caps
Joel Lora yes that part I know. As to why they come out. I can’t really help you without seeing why they are coming out of the hub caps. Maybe your pull rods need to be adjusted to hold them in there a little better.
U put glue or oil on that part?
Neither. It was loctite.
@@ReadytoRunRC niceee
Hi bro, What kind of screw u using to upgrade suspension arm?m2 or m3
Jacky Liew hi there, all screws being used were included in the package so I am not sure of the exact sizing of them.
@@ReadytoRunRC The screws for attaching the back wishbone suspension arm to the hub carriers was missing on the set I received. One side even was missing threads.. :( Seems I'm one screw short for the front as well. I guess you get what you pay for some times..
blaatann sorry to hear that you’re missing a few of the screws.
2nd like bro dang that looks sweet.
RC Drones And More it really is starting to take shape. I will probably be starting the suspension and pull rod upgrades tomorrow. I bought a new set of rims and tires for the car too but they didn’t ship yet. I would’ve liked to have it back together with the new wheels on by this weekend but it doesn’t look like that will happen.
Sir are the screws included in the package?
Rejay Flora screws are included.
@@ReadytoRunRC thanks for the response sir
Rejay Flora sure thing. I try and respond to as many comments as I can. I’m still a small channel so it’s not overwhelming. Thank you for the subscription!
@@ReadytoRunRC you're welcome sir.
bro might as well get ball bearings
Atyab Siddiqui true. Maybe a ball bearing upgrade video coming in the future.