How install Walbro 255 lph fuel pump in Citroen saxo vts nfu engine. Αναβάθμιση αντλίας βενζίνης.

Поділитися
Вставка
  • Опубліковано 27 гру 2024

КОМЕНТАРІ • 20

  • @vanivancarbong
    @vanivancarbong Рік тому +2

    χρήσιμο βίντεο και πολύ σπάνια να βρεις τέτοια μετατροπή

  • @anthonydurchal6458
    @anthonydurchal6458 Рік тому +3

    At 6:40 i do the same thing as but I cut my fingers and I broke all of the plastic 😅

    • @johnnyscarbon
      @johnnyscarbon  Рік тому +1

      right it needs a lot of attention 😊😊

  • @nescafeparamilos4200
    @nescafeparamilos4200 Рік тому +2

    the fuel pumps have a plastic tag ,green or pink or grey .what is the meaning of each color?

    • @johnnyscarbon
      @johnnyscarbon  Рік тому

      depending on the date on mine is gray 2001 model, with green is 2001 second half to 2003.

  • @Mechanicles-vts
    @Mechanicles-vts 3 роки тому +4

    Great job bro

  • @audiokees4045
    @audiokees4045 3 роки тому +4

    I have a saxo who do not well, looks like the pump, normally it gets on pressure by run for some seconds after contact is on, now it does a fraction of
    a second and sometimes I loos all power and the engine stops, restarting it does cure, and it run oke again, I hear this pump can do make things strange. after the test for pollution where the tester did let the motor run on higher rpm, I did get ride home and the engine has no power, nothing but did run, some later it stops, and I did restart and everything was well again. next day the same, running, then stops and restart cure. I also think about the gasoline filters can be glogged,.

    • @johnnyscarbon
      @johnnyscarbon  3 роки тому +3

      If it was the pump it would have left you. Look at map sensor.

    • @audiokees4045
      @audiokees4045 3 роки тому +4

      @@johnnyscarbon I have remove the fuel filter it was clogged, the fuel pump did turn on but just for 0.2 second (pressure did stay high on hose for filter), normally it is 3 a 4 seconds, needs new one. I will also look at map sensor, if the filter was not the cause. I had a car apk (roadworthness) where also excaust is measured, it was lean, I did drive away and it did have no power and engine did stall. After restartind it was normal again, this was after the test from apk station where the enge get pushed to 4000 rpm for measuring. The filter is never replaced, so it is 24 years old, I had for a longer time that on a highway I did have trouble to get past a car, special with wind on front, and it do use more fuel then normal.
      Thanks for your help appropriate it.

    • @johnnyscarbon
      @johnnyscarbon  3 роки тому +3

      enter the diagnostic maybe it's sensor l, it can also be clogged injectors, Because you write me that it consumes gasoline.

    • @audiokees4045
      @audiokees4045 3 роки тому +4

      @@johnnyscarbon Hi There, I have read about sensor, it,s symtoms are scary close when defective. I go check all, I have no option to diagnost the ecu, Can not read it, must go to garage for that. Yes it consumes, I thought 1 liter for every 11 km.

    • @audiokees4045
      @audiokees4045 3 роки тому +4

      Thanks for answer me, and help.

  • @VR-6
    @VR-6 8 місяців тому +1

    Bonjour, pourquoi avez-vous changé votre pompe? Votre saxo de démarrer plus ou caler de temps en temps ou avec des pertes de puissance?

    • @johnnyscarbon
      @johnnyscarbon  8 місяців тому +2

      j'ai fait quelques modifications sur le moteur et c'est la bonne pompe

    • @VR-6
      @VR-6 8 місяців тому +1

      @@johnnyscarbon ou merci

  • @apriliasr7329
    @apriliasr7329 2 роки тому +2

    Benefits?

    • @johnnyscarbon
      @johnnyscarbon  2 роки тому

      what exactly do you want to know?

    • @apriliasr7329
      @apriliasr7329 2 роки тому +1

      @@johnnyscarbon I was wondering the benefits of mounting this type of oversized pump

    • @johnnyscarbon
      @johnnyscarbon  2 роки тому

      Depending on the workshop. My pump cost 150 euros. The installation was done by me.