Both auto settings are colored I wouldn't use them. I can hear distortion on 5 and 6. 0 sounds the best but the levels need to be busted a bit in post. I'm not familiar with Zoom H2N but if it has some flavor of lossless capture like flac or wav, or some flavor of direct stream digital I would use gain 0 and add about 10 bd of gain in post, otherwise 2 is a pretty good compromise between dynamics and volume.
Hello bro ! Very good sound I like it ! I have a question, I bought the Zoom H2N yesterday, and the sound is muffled, it is not as clean as you ! Do you use the "Lo Cut" mode (located at "Input") ? I put it on my backpack, do you have any ideas ? Thank you brother
Nevermind the audio, the image is stunning! You have exactly the right amount of motion blur to make it look just right 👌 What ND filter did you use? I'm impressed!
Vielen Dank! Ich habe die Outlander Satteltasche von TripMachine auf der Interceptor. Das Mikrofon befindet sich in der hinteren "Flaschentasche" direkt über dem Endtopf.
Hi. Echt gutes Video.Welche Einstellungen hast du bei der GoPro benutzt wenn ich fragen darf? Hatte es auch mal mit einem ND filter versucht aber es nie richtig hin bekommen😅 hast du hypersmooth an? Sieht auf jeden fall so aus. Das hat bei mir nämlich immer für Probleme gesorgt. Aber bei dir sieht das echt genial aus.
Hey, freut mich wenn es dir gefällt! Ja, ich benutze Hypersmooth und Super-View. Ansonsten 5,3k und 25 fps. Die ISO Einstellung ist wichtig. Habe den auf min 100 und max 200 gesetzt. Wenn es zu dunkel ist, bringt der ND Filter natürlich nichts ;) Ansonsten einfach googlen, bzw. auf UA-cam suchen - da gibt es bereits einige Videos, die die Einstellungen der GoPro für ND Filter behandeln.
Thank you! No, I didn't edit the audio. The key element is to only use the M+S microphones. With X+Y I only got wind noises. Depending on how loud your exhaust is you may need a lower gain.
@@DerLados The XY mode which I am using should explain the clippings I get. Thanks. I will try using the mono mode next time. I also bought a Purple Panda lavalier mic to enhance the audio. Hope everything will work out okay.
Ist mir ganz selten passiert. Im Stand, im Leerlauf. Dabei musste ich aber wirklich nur minimal Gas geben. Ist jetzt nichts, was mir regelmäßig passiert oder gar bei normaler Fahrt nervig ist.
@@DerLados danke für die Antwort! Bist du sonst zufrieden mit den neuen Reifen? Brabbelt die eigentlich mit dem zard auch beim auslaufen, also mit der Motorbremse?
@@Flokinjo Sehr gerne! Meinst du die neue Originalbereifung? Ich habe ein 2019er Modell, hatte also noch die alten Pirellis als Erstbereifung. Kann zu der neuen somit nichts sagen. Habe jetzt den zweiten Satz Michelin Road Classic drauf und bin sehr zufrieden mit denen. Der Zard brabbelt beim Runterschalten mit der Motorbremse durchaus. Dank DB-Killer und co., darf man sich da aber nicht zu viel erwarten. Aber definitiv besser als der Originale und insgesamt "frötzelt" der Zard sehr schön in die Kurve rein.
Good sound
Thanks!
that is the craziest rev matching effort that i have seen
Yeah, just for the mic testing
Gain 4 🔥🔥🔥🔥
Thank you 🔥🔥🔥🔥
Definitely 💯
Sound great!
Where do you put the microphone?
Both auto settings are colored I wouldn't use them. I can hear distortion on 5 and 6. 0 sounds the best but the levels need to be busted a bit in post. I'm not familiar with Zoom H2N but if it has some flavor of lossless capture like flac or wav, or some flavor of direct stream digital I would use gain 0 and add about 10 bd of gain in post, otherwise 2 is a pretty good compromise between dynamics and volume.
Thank you very much for your analysis! The sound files are saved in wav format. I'll play a little bit with gain 0 and edit it in post.
Beautiful scenery, where is that road?
Thank you! The road is located in Austria.
Hello bro ! Very good sound I like it !
I have a question, I bought the Zoom H2N yesterday, and the sound is muffled, it is not as clean as you ! Do you use the "Lo Cut" mode (located at "Input") ? I put it on my backpack, do you have any ideas ? Thank you brother
Thanks! The H2N has 4 directional microphones. I just use x+y. Don’t use m+s those are responsible for the muffled sounds
Nevermind the audio, the image is stunning! You have exactly the right amount of motion blur to make it look just right 👌
What ND filter did you use? I'm impressed!
Thank you so much! I used a ND16 filter and on the last gain test a ND32.
@DerLados Well it's beautiful! Do you shoot manual or do you let the GoPro do its thing?
@@bnlm I shoot with manual settings.
@@DerLados It shows, nice work :)
Wo hast du das Zoom angebracht? Sound lst klasse 👍
Vielen Dank! Ich habe die Outlander Satteltasche von TripMachine auf der Interceptor. Das Mikrofon befindet sich in der hinteren "Flaschentasche" direkt über dem Endtopf.
Danke dir! 👍👍
Hi. Echt gutes Video.Welche Einstellungen hast du bei der GoPro benutzt wenn ich fragen darf? Hatte es auch mal mit einem ND filter versucht aber es nie richtig hin bekommen😅 hast du hypersmooth an? Sieht auf jeden fall so aus. Das hat bei mir nämlich immer für Probleme gesorgt. Aber bei dir sieht das echt genial aus.
Hey, freut mich wenn es dir gefällt! Ja, ich benutze Hypersmooth und Super-View. Ansonsten 5,3k und 25 fps. Die ISO Einstellung ist wichtig. Habe den auf min 100 und max 200 gesetzt. Wenn es zu dunkel ist, bringt der ND Filter natürlich nichts ;)
Ansonsten einfach googlen, bzw. auf UA-cam suchen - da gibt es bereits einige Videos, die die Einstellungen der GoPro für ND Filter behandeln.
Great vid brother. May I ask if you edited the audio in the footage? I am currently using my zoom at gain 2. However, clippings are very much audible.
Thank you! No, I didn't edit the audio. The key element is to only use the M+S microphones. With X+Y I only got wind noises. Depending on how loud your exhaust is you may need a lower gain.
@@DerLados The XY mode which I am using should explain the clippings I get. Thanks. I will try using the mono mode next time. I also bought a Purple Panda lavalier mic to enhance the audio. Hope everything will work out okay.
Where did you have the mic, if I may ask? I'm tossing up between under-seat and backpack when I get mine.
I place the mic in a bag above the exhaust.
Why is your bike refusing to rev match
For me it's working good enough. I love to ride the Interceptor. I'm always trying to get better at rev-matching.
Wenn du kurz und ganz leicht das gas lupfst, geht sie dir dann manchmal aus? Die maschine auf der Probefahrt hatte das. War ziemlich nervig
Ist mir ganz selten passiert. Im Stand, im Leerlauf. Dabei musste ich aber wirklich nur minimal Gas geben. Ist jetzt nichts, was mir regelmäßig passiert oder gar bei normaler Fahrt nervig ist.
@@DerLados danke für die Antwort! Bist du sonst zufrieden mit den neuen Reifen? Brabbelt die eigentlich mit dem zard auch beim auslaufen, also mit der Motorbremse?
@@Flokinjo Sehr gerne! Meinst du die neue Originalbereifung? Ich habe ein 2019er Modell, hatte also noch die alten Pirellis als Erstbereifung. Kann zu der neuen somit nichts sagen. Habe jetzt den zweiten Satz Michelin Road Classic drauf und bin sehr zufrieden mit denen. Der Zard brabbelt beim Runterschalten mit der Motorbremse durchaus. Dank DB-Killer und co., darf man sich da aber nicht zu viel erwarten. Aber definitiv besser als der Originale und insgesamt "frötzelt" der Zard sehr schön in die Kurve rein.