All I know is the farmers in Arizona say that they went to JT-6 and stopped replacing parts and pins and bearings. A friend put regular grease on his hand and could wash it off with soap and water after a few minutes. JT-6 he said he couldn’t get it off without using solvent and Orange goop and that was a chore.
Thanks for explaining all the different types and applications. I have to check my last tube of grease I bought when I repacked my front Disk brake wheel bearings. Might have to repack them after this video. Cheers from Motown.
Excellent video!!! Thank you! However, one topic was forgotten: When and why would someone select and use a synthetic grease over a petroleum-based grease?
Don't keep the high temp grease in a gun too long in temps exceeding 95 F. It partially turns into a liquid for a real messy gun. Makes me wonder about it's suitability in high temp applications.
LUCAS MARINE GREASE MY #1 GO2 I had a torn inner boot drivers side on my 2002 Toyota Corolla and it was making bumby and vibration on acceleration. By reading and searching on the internet I tried two full tubes of marine grease and injected it into the spider bearings and the other tube in the boot and closed it up. Took it for a small spin and the vibration faded away within 20 seconds once I hit the HWY Freeway. Took it up to 150 km/per Hour for 30 seconds and dropped it to 130 km/Hr for 30 minutes. AMAZING! LUCAS MARINE GREASE IS A MIRACLE! IT HAS BEEN NIW 3 MONTHS AND SMOOTH AS PIE. I could not go more then 60 km or it would vibrate. On acceleration it would vibrate. Before replacing your CV Joint, try LUCAS MARINE GREASE!!!
Interesting Video. I see Mystik JT-6 Hi-Temp#2 with 3% Moly. I am a manufacturer of molybdenum disulfide, supply molybdenum disulfide to moly grease producers. Thanks for sharing this video, tell us the difference between different types of grease.
Thanks for the well done video ! I have a boat trailer that the bearings are imersed in salt water. I believe that when wheel hubs that are warm[travling to the launchsite] are imersed in water that the water can be sucked past the inner seal if there is any void and contaminate the hub etc. Do you have any info that would support that asumption? your thoughts would be appreciated. Thanks again
Thanks for the information. I am also wonder about the JT-6 Sythentic Blend #2 How would it preform in a gear box? Thanks for the information and your video is quite informative.
Glad the information is helpful! Gear boxes typically require greases that are softer in consistency than a #2 grease. If the gear box requires a #2 grease, the performance of Mystik JT-6 Synthetic Blend #2 in a gear box would depend upon the design of the gear box, input and output speeds and the load on the gear box. Feel free to give us a call at 1-800-248-4684 on our product answer line if we can assist further!
Gary -- Without knowing the exact lawn equipment it's hard for us to make a specific recommendation but you can always call us on our Lubes Help line at 1-800-248-4684 and if you tell us the specific piece of equipment, we could provide a recommendation. We also recommend that you consult your owner’s manual for proper grease selection. If this information is not available, you may wish to consider using Mystik JT-6 Hi-Temp Grease No. 2.
A “dielectric grease” is a grease which does not conduct electricity. It is used to lubricate and protect electrical connections without conducting electricity across multiple connections. Some dielectric greases use silicone fluid as the base oil for the grease. In short, some, though not all, dielectric greases are silicone based, though not all silicone based greases are dielectric greases. Hope this helps!
We would recommend either Mystik JT-6 Synthetic Hi-Temp 220 #2 Grease or Mystik JT-6 Synthetic Blend Grease for that application. Let us know if you have any further questions - happy to help!
I need EP2 lithium grease for my wheel bearings...What’s this mean compared to NGLI 0, 1, or 2? I have an off road on road Land Rover that I want to maintain as well as possible overseas. Can you help me understand?
An EP2 Lithium grease means an Extreme Pressure, NLGI #2 grease with lithium as the base grease. NLGI also has a code on the label, LB/GC, that means that grease is approved for wheel bearings and disc brakes. We would recommend a lithium complex grease as they are made for high temperature where a plain lithium grease is not. The Mystik JT-6 Hi Temp would be a good recommendation for you. If you have more questions, give us a call on our product answer line at 1-800-248-4684 - would be happy to help you and answer your questions in more detail!
There are some very good UA-cam videos for cleaning and lubricating the AR 15. There are several opinions on what grease to use, however at this time, we do not manufacture a grease that would be recommended for that application.
Use an oil not a grease. 10w30 or whatever is on your shelf is perfectly fine. It's a gun designed to be beat to death and still work. Adding oil of any kind other than rem oil, which is as thin as mineral spirits, will do the trick.
In the beginning of the video when I saw beautiful woman started talking about "Mystik Lubricants" for a moment I thought that she gonna start talking about sex lubricants 😁😁😁 "Mystick Lubricants" is kinda wrong name 😁😁
Mark no reason you should have interrupted the video. You aren't photogenic and you look angry. For the next video just let the lady explain everything.
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
All I know is the farmers in Arizona say that they went to JT-6 and stopped replacing parts and pins and bearings. A friend put regular grease on his hand and could wash it off with soap and water after a few minutes. JT-6 he said he couldn’t get it off without using solvent and Orange goop and that was a chore.
Thanks Jeremy! A lot of our heavy duty customers say the same thing! Less time to worry about regreasing that fifth wheel and other parts.
I can second that. The more cussing I have to do to wash off grease or lubrication, the better I know it is
Thanks for explaining all the different types and applications. I have to check my last tube of grease I bought when I repacked my front Disk brake wheel bearings. Might have to repack them after this video. Cheers from Motown.
Excellent video!!! Thank you! However, one topic was forgotten: When and why would someone select and use a synthetic grease over a petroleum-based grease?
Been trying to find a good synthetic grease. Red Line hardens up, Mobil 1 separates, gonna try Mystic.
STP?
Don't keep the high temp grease in a gun too long in temps exceeding 95 F. It partially turns into a liquid for a real messy gun. Makes me wonder about it's suitability in high temp applications.
LUCAS MARINE GREASE MY #1 GO2
I had a torn inner boot drivers side on my 2002 Toyota Corolla and it was making bumby and vibration on acceleration. By reading and searching on the internet I tried two full tubes of marine grease and injected it into the spider bearings and the other tube in the boot and closed it up. Took it for a small spin and the vibration faded away within 20 seconds once I hit the HWY Freeway. Took it up to 150 km/per Hour for 30 seconds and dropped it to 130 km/Hr for 30 minutes.
AMAZING!
LUCAS MARINE GREASE IS A MIRACLE! IT HAS BEEN NIW 3 MONTHS AND SMOOTH AS PIE.
I could not go more then 60 km or it would vibrate. On acceleration it would vibrate.
Before replacing your CV Joint, try LUCAS MARINE GREASE!!!
Interesting Video. I see Mystik JT-6 Hi-Temp#2 with 3% Moly. I am a manufacturer of molybdenum disulfide, supply molybdenum disulfide to moly grease producers.
Thanks for sharing this video, tell us the difference between different types of grease.
Which grease for a rifle? Waterproof is a plus.
Great explaining of product
Outstanding
Can heat cause the grease to swell out of tube
Great Video! I am re-lubricating a 30-40 year old Black & Decker corded electric drill. Which of your lubricants do you recommend?
Can I use nlgi no.2 multi purpose grease on disk brake slider pins
On yea I like this video!
Hey which one should I use for an altenater.
What is the size of greasing gan that fits on this grease container
Lithium complex? Or Aluminum based?
Do you have a #1clear grease???
Can I use lucas xtra heavy duty on my subaru?
can i use lithium grease to plastic and rubber coz i used it to my joystick mobil xhp 222 help me if not i need to remove that to my joystick
Thanks for the well done video ! I have a boat trailer that the bearings are imersed in salt water. I believe that when wheel hubs that are warm[travling to the launchsite] are imersed in water that the water can be sucked past the inner seal if there is any void and contaminate the hub etc. Do you have any info that would support that asumption? your thoughts would be appreciated. Thanks again
If you don’t already have them, bearing buddies work well for me. Push the water out with grease.
What grease would be used in power tool gearboxes like electric drill or skill saw?
Hey there! We'd recommend our JT-6 Hi-Temp Grease Number 2 - here's the direct link to learn more www.mystiklubes.com/do/product/GREASE/665005002.
Thanks for the information. I am also wonder about the JT-6 Sythentic Blend #2 How would it preform in a gear box? Thanks for the information and your video is quite informative.
Glad the information is helpful! Gear boxes typically require greases that are softer in consistency than a #2 grease. If the gear box requires a #2 grease, the performance of Mystik JT-6 Synthetic Blend #2 in a gear box would depend upon the design of the gear box, input and output speeds and the load on the gear box. Feel free to give us a call at 1-800-248-4684 on our product answer line if we can assist further!
I run a mowing business when greasing the bearings for blade spindles which grease is recommended
Gary -- Without knowing the exact lawn equipment it's hard for us to make a specific recommendation but you can always call us on our Lubes Help line at 1-800-248-4684 and if you tell us the specific piece of equipment, we could provide a recommendation. We also recommend that you consult your owner’s manual for proper grease selection. If this information is not available, you may wish to consider using Mystik JT-6 Hi-Temp Grease No. 2.
What would be a anti vibration grease for springs?
HaHaHaHaaaa. Good one.
what's the difference (if any) between silicone grease vs. dialectic grease????
A “dielectric grease” is a grease which does not conduct electricity. It is used to lubricate and protect electrical connections without conducting electricity across multiple connections. Some dielectric greases use silicone fluid as the base oil for the grease. In short, some, though not all, dielectric greases are silicone based, though not all silicone based greases are dielectric greases. Hope this helps!
What is the best grease for bike bearings and drum brakes???
JT-6
Redline cv2
Good
Been awhile since the last comment.. nobody has chimed in about snowmobile grease... Any suggestions for low temp, water proof, suspension grease ?
We would recommend either Mystik JT-6 Synthetic Hi-Temp 220 #2 Grease or Mystik JT-6 Synthetic Blend Grease for that application. Let us know if you have any further questions - happy to help!
What grease nlgi number would you recommend for mountain bikes?
Hi Joseph! Talked to our technical experts and they recommend NLGI #2.
Ok thanks!
I need EP2 lithium grease for my wheel bearings...What’s this mean compared to NGLI 0, 1, or 2? I have an off road on road Land Rover that I want to maintain as well as possible overseas. Can you help me understand?
An EP2 Lithium grease means an Extreme Pressure, NLGI #2 grease with lithium as the base grease. NLGI also has a code on the label, LB/GC, that means that grease is approved for wheel bearings and disc brakes. We would recommend a lithium complex grease as they are made for high temperature where a plain lithium grease is not. The Mystik JT-6 Hi Temp would be a good recommendation for you. If you have more questions, give us a call on our product answer line at 1-800-248-4684 - would be happy to help you and answer your questions in more detail!
01:06 Check ✅
Which grease is best for side by side bushing
Sir, Can you send us an email to contact you with some additional questions or feel free to call our product answer line at 1-800-248-4684.
Which grease would you recommend for an ar 15 bolt? Assuming it will be a high speed high temperature grease. Thanks
There are some very good UA-cam videos for cleaning and lubricating the AR 15. There are several opinions on what grease to use, however at this time, we do not manufacture a grease that would be recommended for that application.
Lsa
Use an oil not a grease. 10w30 or whatever is on your shelf is perfectly fine. It's a gun designed to be beat to death and still work. Adding oil of any kind other than rem oil, which is as thin as mineral spirits, will do the trick.
What about a number 2 grease... Ooh you minx.
Sounds like a lot of marketing B.S.
In the beginning of the video when I saw beautiful woman started talking about "Mystik Lubricants" for a moment I thought that she gonna start talking about sex lubricants 😁😁😁 "Mystick Lubricants" is kinda wrong name 😁😁
LOL! 👍
What grease u use on her?
The King ky jelly lol
@@Jordan-fg7ek
Is that using a hand pump ?
The King Classy.
@ The King
For her? Hot, dirty and wet environment: Super heavy duty #2
Mark no reason you should have interrupted the video. You aren't photogenic and you look angry. For the next video just let the lady explain everything.
If you’re owned and based out of Venezuela I don’t want any part of your companies products.
???
Mystik...lol..not proven..lossa bad word on lard
Not proven? Mystik has been around for decades dude.