Lezyne Digital Alloy Drive Review: Modernizing a Classic

Поділитися
Вставка
  • Опубліковано 7 вер 2024

КОМЕНТАРІ • 20

  • @ericpeysar2593
    @ericpeysar2593 2 роки тому +2

    Finally a great pressure test. Really appreciated the extra effort to take an average of three attempts. This is how a review should be done. Thank you!

  • @pgreenx
    @pgreenx 2 роки тому

    Nice review. The stand alone Topeak digital pressure gauge weights the same amt as the diff between the two lezyne alloy pumps (60 grams) so it makes sense to me to buy no-pressure gauge pumps and have more flexability

  • @adriant.7457
    @adriant.7457 5 років тому +3

    Very nice and well made review.
    Also the video is pretty good.
    keep up the good work! :D

  • @yurious02
    @yurious02 6 років тому +3

    very thorough review! thank you.

    • @MTBguide
      @MTBguide  6 років тому

      Dennis Tran thanks!

  • @trelosenario
    @trelosenario Рік тому +1

    Hi , great comparison test.
    I finally bought the lezyne as it was ticking my boxes and did a similar test on my 35mm tyre .
    It took me 300 reps for 75 psi ,200 reps for 53psi , 100 for 25psi , measured with appropriate separate sks digital gauge and i could definitely pump more ...
    Could yours be defective?
    Thanks for this video.

  • @steffanzwerg3424
    @steffanzwerg3424 3 роки тому

    Die Abweichungen sind okay! Beim aufstecken des Druckmessers entweicht auch kurz Luft. Schlimm finde ich bei Lezyne das Plaste Schraubgewinde!

  • @MM-fr6ue
    @MM-fr6ue 2 роки тому +2

    The hand pumps use plastic threads to connect a metal hose thread. No pressure, full shearing. Lezyne fails.

  • @jolly_raider
    @jolly_raider Рік тому

    The battery drains empty even when not used, you need to carry a spare CR1220 all the time with you, a bit useless when the display doesn't turn on

  • @LemonySnicket-EUC
    @LemonySnicket-EUC Рік тому

    Does any air escape when you remove it from the valve ?

  • @zerocooljpn
    @zerocooljpn 5 років тому

    hate these tiny pumps. Great review, but could you please add the time it took you to reach that pressure level as well? I'd really like to know how long you had to suffer (or how many times did you have to push the pump)

    • @MTBguide
      @MTBguide  5 років тому +1

      Thanks! The results of the 100 rep (100x push the pump) is shown at 4:26, getting to 18,3psi/1,26bar. It took about 140 seconds to get there. The max pressure test was a nightmare...I don't have a time for that since a few breaks were necessary (not recorded).

    • @zerocooljpn
      @zerocooljpn 5 років тому +1

      @@MTBguide omg, respect on the high quality of data and track keeping. My mini pump got me super tired once I'm really wondering if it was only my low quality pump, or that they all sucked. I was pumping my tire for like 15 mins in the mid of the night/nowhere, which really sucked. Your video and data is really helpful.
      Based on the numbers above, I'm guessing, ignoring human muscle and mental fatigue, to get to 90psi, it would take like 492 reps, which would take aprox. 688 seconds (11m28s). Which is a bit faster than it takes mine I guess, but still, exhausting experience I'd guess.

  • @user-yv2cz8oj1k
    @user-yv2cz8oj1k 5 років тому +1

    They had me until the CR1220, just use CR2032 and make life easier. Rather have an accurate mechanical guage.

  • @dominicsorby7933
    @dominicsorby7933 3 роки тому

    Mine doesn't turn on...

  • @unogazzy84
    @unogazzy84 6 років тому

    What's the width i millimeters?

    • @MTBguide
      @MTBguide  6 років тому

      It's 27mm to max 37mm including the screen.

    • @unogazzy84
      @unogazzy84 6 років тому

      I contacted wiggle but they couldn't answer the question so thank youu very much for the answer :) Great and very thorough.

  • @Stengell
    @Stengell 2 роки тому

    I have this pump and i hate it with a passion... don't buy it!