Why I hate stickering…
Вставка
- Опубліковано 28 кві 2023
- #rubikscube #cuber #cubing
This is the MF8 The Cullinan Cube Ice Green Body (limited edition), a stunning nice looking puzzle! However if we wanted to fully solve this we would have to put on the stickers but here’s why I had trouble with that….
Get the SoupTimmy SpeedCube now 👇
speedcubeshop.com/products/so...
It helps support the channel : ) - Розваги
I spent $119 USD on this too 🥲
That’s expensive!
That is expensive
Oh no!
So pain
you gotta do a live stream stickering the cube
One thing I have seen some cubers do when applying stickers to small puzzles like a 3x3 is use a big piece of clear tape to grab all of the stickers at once, then they carefully apply all of the stickers to one side all at once then they carefully remove the tape before redoing that with a different side.
I don’t know how well it would work on a puzzle of this size but it would be much faster and much less annoying than doing each sticker one at a time.
Also a funny thing about all sticked puzzles is that any sticked puzzle without the sticker is technically a force puzzle
You’ve got this Timmy keep going, don’t stop
Massage my hands afterwards plsss
@@SoupTimmy ok
as someone who has not done any intense stickering (yet), timmy has indeed scared me into ever buying any complex stickered puzzles :')
You should try it's fun 🙃
fr
Soup Timmy please make alan Rickman with Rubik's cubes as it is his 78 bday
Using a craft knife or long (eg) darning needle will let you peel off, pick up and accurately position stickers much more easily. Just be very careful with the sharp blade. (Buy stickerless xx)
I've never stickered a cube but I've put stickers on Lego sets. Here's my advice: The screwdriver isn't thin enough to get the job done well, use an exacto knife instead, and use it for EVERY sticker. Not just for putting it on, but for taking it off the sheet too. You shouldn't ever have to touch the sticker directly with your hands.
Use a very dull knife (I recommend getting an xacto knife). The use the edge near the tip of the knife to peel it off the sheet, then place the sticker down halfway and use your finger to put the rest of the sticker on. This method works great for me at least.
I second this method, it also helps prevent you from crumpling the sticker when you try to get it off the paper
I enjoy stickering puzzles since it’s a longer process and it feels therapeutic. Would be cool if you brought these puzzles to the upcoming SCS comp to show off.
Sticker them for me? 😮
@@SoupTimmy I gladly would! I already have a few mf8 puzzles I’ve stickered
This puzzle looks like the Big Dipper Megaminx.
as someone who has never had to sticker a cube (i dont have that many cubes), timmy reminds me of a mistake my friend did where he bought a big stickered puzzle and both of us stickered it for lik 3 hours
diamond puzzles would make you relax after such misery, i promise. few minutes for a beautiful 30x40cm picture will be a real relief.
don't torture your hand
Exactly
Yeah
torturen't your hand
true
Yeah
Self close tweezers are a lifesaver. Any craft store will have them.
Your sticker img is pretty good. I would not have been able to do it that good!
legit tensioning cubes are for real the second hardest thing been tensioning my 3x3-7x7 for comp for hours per day and can't stop doing micro adjustments 😣
Its actually incredibly good no one is better then you are
I put the stickers on the edge of the sticker sheet to align the small ones, sometimes there's a clear sheet that u can use to do a whole side at once also
Rest in piece fingers you gave us some sick videos 🎉
0:05 noooo they trolled us
You should consider getting angled needlenose/precision tweezers. I don't know a lot about cubers, but I know a lot of kpop fans use them to decorate top loaders lol
Ur vids are super cool
Love ur vids
I Hate Stickering Too LOL!
Make a longer video where you sticker those three puzzles.
*old man's voice* back in my days, we had to sticker all our cubes by hand and no one ever complained!
More serious tho, you should try using a hobby/X-Acto knife to put the stickers one i na way you tried to use that small screwdriver, and use it for all of the stickers. It helps as you can more precisely judge where the sticker will go and therefore it'll look better in the end
Well... looks pretty good!
It’s amazing
me when i buy puzzles with stickers:
You are the best soup Timmy
Rip your hands 💀
Also can’t wait for that Ivy-megaminx puzzle
That doesnt look close to a megaminx
i beleb in you, u can do it keep going neber giv up
This is why all of my cubes are stickerless
if you don't care about tiny bubbles, you can get application tape and it's faster
I think the normal versions might not need stickering
They sold out :(
@@SoupTimmy :(
You should try and make cube art with 2x2 cubes
Make a timelapse stickering the 3 puzzles
Nice Video 👍
The reason the stickers came is so that you can look back at it when you are 70 and think "That was the puzzle itself.."
It’s amazing even you only did one side
Hey make a video of u solving the 32 side rubiks cube the tutt minx
I hate stickering too here's why if i try to put the sticker it ended up sticking the wrong area 💀💀💀 and my hand is very shaky
I love ur stickering
The torture is very sad 😢 but u should continue
Never Give Up!!!
Yes keep snickering because it will look better and I want to see you solve it 😊
Can you make the tutorial of chester 4x4x4 axis cube llusion
I feel the same pain, but not for Rubiks cubes with Lego
Nice stickerin
Please make a another video of this video (part 2)
This is one of the many reasons I don't use stickered cubes
Keep going and do a time lapse!
Continue stickering souptinmy
And then those tiny stickers wear off quickly...
This is why I more or less only buy stickerless puzzles!
It should be an industry standard
yup you are right wont last 5 solves
@@SoupTimmy they should at least come with application tape and a couple of spare sets.
I've seen other larger megaminx style puzzles that come with spare stickers
Souptimmy what is your main 3x3
You’re gunnu have to put the stickers on 😂😂😂
hey souptimmy! as soon as i got my gan 13 maglev i was worried because there were 2 missing parts on the center piece. Do you know where to get an extra center piece?
Get a return on the cube if there’s missing parts
CONTINUEEEEE
Continue with the ones you got
Its like the big dipper megeminx
Try solve the 21x21 megamix😂
try to solve ghost cube please
Me too I know I hate stickering Rubik's cube I know how hard it felt for you
Try the void cube
You can do it Timmy but I know your hands will be annoyed with you
im agree with you
You can do it timmy
Do u think u could shoe me how to solve a robix cube bc I had one for 1 Yr and I can only solve one side its annoying pls can u show me
Dat ‘tis suit cooow
there are some sticker aplicators that are like a tape but bigger
Don't give up
Yes continue stickering
Mirror cube for you is the best
Like ur vids
Go on... Continue😅
The secret to sticks ring cubes quickly is buying cubes that come stickered
continue 😊
Yes Timmy
i think that cube is like the big dipper megaminx
It came for a big dipper megaminx with goldenlemon trim
why dont you use clear tape? so easy and precise
POV: mf8 makes big dipper megaminx on steroids
Try buying the same puzzles but without applying stickers
Can you make princes peaches out of Rubik’s cubes
i always hate stickering lego not even rubiks cubes
That’s a BiG dIpPeR mEgAmInX
So funny 😂😂😂
AIN'T THIS A BIG DIPPER MEGAMINX
Hi Timmy
I have a questionl
Can you please answer in next video
I have a 4by4 cube
I don't know how to solve it
It has a twisted corner piece
Can you please tell how to find it
Please please please please please 0:15
Imagine being so lazed that when selling products you make the buyer do the work like he’s an employee
Use tweezers for the hard ones
bro my cube exploded with a false turn and the yellow color broke :C
That's exactly why I buy stickerless cubes
i would not sticker it and just leave it how it was, a cool neon puzzle
Can you put all the stickers on it?
Keep stickering man
Hi Timmy!
Could you make a mosaic of Madara uchiha, Obito uchiha, Gaara or Hidan from Naruto?
Good
yeah continue stickering please
Gain ain't worth the pain. Neon cube looks better without stickers.
And awesome