If you use a flyback diode for the motors, you won't have to worry about the motors accidentally producing current. You could then use a 5-volt regulator to power the Arduino with the lipo battery.
hello that is a great idea the same idea as the suitcase that follow you ! one question! is that possible to send the robot to a certain location and tell him to return from the application? like a path track?
How are you connecting that USB 5V battery? Are you connecting that through the inline regulator and then using the 5v out of the board to power the bread board/accessories? Or are you using the battery to power the breadboard and then feeding the power into the Adruino/accessories from the board? Sorry for my confusion.
Great ideas and videos! I have a question about this; I'd like to give this project a try but the location in which i want to use it the Cellphone reception is very poor. Will that be a problem?
Have you had any problems powering the Arduino with battery pack? Most seem to switch off if there isn't a certain amount of power drawn. I was hoping to power a small arduino project that way.
MrBryanhanna you may be better off wiring your own battery pack and a charging circuit if it's something complex or just wiring up a jst connector to a voltage regulator and plugging a Li-poly or a Li-Ion battery directly into that. If it's really dead simple, an alkaline battery box of appropriate voltage may even be the best option.
keep up the great work guys this is amazing, im looking for inspiration for my ERA("Electronics robotics, automation") degree final project. im still learning to code any good sources for complete noobs? i have a raspberry pi but im thinking i want to give this a try using the audrino since you guys did all the hard coding work already.
If your using a bluetooth module, why not have the phone in hand log your gps location every 5 seconds and upload them to the coolers phone as waypoints. This will significantly lower the amount of crashes.
If I have everything built, but no compass, can this still run? What's the simplest way to NOT include the code for the compass? Is the compass code a dependency?
hi, my freind raj kewlani , did the project works with you? if yes. i hope you contact with me please. my email: jabli717@gmail.com snap chat: gassan_717
Hi Hacker.....I do this project.. every thing is done but not move.what can I do bro... please help me.code is uploaded successfully.pls help me bro..and RX pin not defined in your project for GPS module.how to connect GPS RX pin to Arduino.please please help me..I hope reply from you.
Cooler:30: error: 'Adafruit_HMC5883_Unified' does not name a type Cooler:77: error: expected constructor, destructor, or type conversion before '(' token how to remove these two errors???
Hi the adafruit compass is discontinued and I purchased a different brand, would you be able to write a blog post about augmenting your code to fit other compasses?
Hacker House , this is really awesome project.Too cool...... We have followed each and every step and connected each and every component but facing problem due to the use of neo ublox instead of PAM parallax gps.
@@adrianhernandez1654 have u worked with neo 6m gps module,i f its working pls let me know because i'm also working with the same gps moudle please me fast i dont have much time to complete the project
@@ajithmustargi9825 hello Broh...! Have you completed the project with neo 6m GPS module.If yes please let me know coz I am also working on it and literally i have few days to complete the project.Hope i get the positive reply from you
Hold on can someone help me... so the compass module itself know where the current heading... but how can it know the distance and angle between the cooler and the android device?
Hello Now I'm making it but my problem is I can't connect the Blynk app to Bluetooth when I try to connect it something Alert on my smartphone screen is " Something went wrong when connecting to your bluetooth device. Please try again later"...I can't find my mistake I'm really need your help right now
Hello, would there be any place? that you could buy a complete "Kit" to have this follow-me feature, I have a platform with payload for 200kg and I really wanted to add this electronic resource, you can help me, as I have no knowledge to develop anything about it, so I look for where to buy
Excuse me sir, I'm trying to connect the Blynk into my HC-05 Bluetooth module. But it can't be connected. I even used the library program code. It always say "Can't connect" and the other time it keep showing "connecting...". I had paired my phone bluetooth with HC05, i had paste the auth code from the email that has been sent. I've tried to use another android phone. But the result is the same. Please help me to this problem, thank you. Sincerly, Zahira
Very cool project. Keep the spice flowing, man!
If you use a flyback diode for the motors, you won't have to worry about the motors accidentally producing current. You could then use a 5-volt regulator to power the Arduino with the lipo battery.
Excellent Video! Thanks for Sharing and giving detailed instructions.
i might use this for my r2-d2 project
Can you provide us with the program with both forward and reverse functionality of the motors? That would be so helpful. Thanks :)
damn 70k already? been with you guys since you got the house, congrats on all the success. youll be at 1mm soon!
Thanks Calvin!
hi,
please tell me what to use as a alternative of PAM-7Q gps module.
because this is not available here.
thanks
Same question . Please answer if someone done the project
GPS Trolling Motor Spot Lock, here I come! Thanks for this.
what app you use?? blynk are now supported Bluetooth module
Can we use gps module insted of PAM-7Q GPS module
Please someone answer this ques
Can I use other GPS module
Do you have any recommendations for iOS compatible bluetooth modules???
Can you make a video to explain your code, i think it is really useful. Thank you so much.
kodu nerden bulabilirim
Where's the next part dude?
This is dope!
I'm also going to make arduino videos ;D
+Code Teacher awesome!
How i can use Module Gps neo 6M for this project?
@@hackershack How i can use Module Gps neo 6M for this project?
can we use GPS neo 6m instead of PAM 7Q GPS ......? plz replay.
the old blynk app was shut down and the new blank doesn't have the needed function for the bluetooth and gps.What alternative app should we use?????
enconrtaste alguna perdon?
hello that is a great idea the same idea as the suitcase that follow you ! one question! is that possible to send the robot to a certain location and tell him to return from the application? like a path track?
Incredible! how many rpm have your motors, What specification have?
do you have any update in the code. if yes pls reply or upload in your link
friend, if i´m use unoe module gps 6m don´t have any problem for the code?
hi
I have a question.
PAM-7Q GPS module sensor desin
Can I use the GY-GPS6MV2 sensor?
How are you connecting that USB 5V battery? Are you connecting that through the inline regulator and then using the 5v out of the board to power the bread board/accessories? Or are you using the battery to power the breadboard and then feeding the power into the Adruino/accessories from the board? Sorry for my confusion.
superb project. can i use msp 430 launchpad instead of aurdino ,is it easy to code in msp 430 like aurdino?
Great ideas and videos! I have a question about this; I'd like to give this project a try but the location in which i want to use it the Cellphone reception is very poor.
Will that be a problem?
Hello sir did you try to add ultrasonic for this project to avoid walls or other object then follow again the user
How can I use Neo-7M GPS module instead of PAM-7Q GPS Module? What should I change in the code? Please Let me know.
hi, does this prevents collision?
nice done job very awsome project
cool video.
Thank you for sharing your project!
I want to attach robot arm and camera with like this autonomous car.
Have you had any problems powering the Arduino with battery pack? Most seem to switch off if there isn't a certain amount of power drawn. I was hoping to power a small arduino project that way.
MrBryanhanna you may be better off wiring your own battery pack and a charging circuit if it's something complex or just wiring up a jst connector to a voltage regulator and plugging a Li-poly or a Li-Ion battery directly into that. If it's really dead simple, an alkaline battery box of appropriate voltage may even be the best option.
what is your motor speed rpm?
How i can use Module Gps neo 6M for this project?
Is it possible to make it with ublox GPS? And what and how I have to change in code to make it works? Thanks
all the best guyz
blue eyes dude
keep up the great work guys this is amazing, im looking for inspiration for my ERA("Electronics robotics, automation") degree final project. im still learning to code any good sources for complete noobs? i have a raspberry pi but im thinking i want to give this a try using the audrino since you guys did all the hard coding work already.
can i use Neo 6m v2 instead of parallax Pam 7Q
from where can i get the whole programming bro..??
If your using a bluetooth module, why not have the phone in hand log your gps location every 5 seconds and upload them to the coolers phone as waypoints. This will significantly lower the amount of crashes.
Neat project. Thanks for sharing. I want to give it a go. I can't find a reference to the "Blynk" code. Can anyone share?
Awesome video, question? You said t only works on android only, is there other way to work on a iPhone?
Great Project!
If I have everything built, but no compass, can this still run? What's the simplest way to NOT include the code for the compass? Is the compass code a dependency?
same problem
can you put the conde in someplace please?
sir i am useing ublox 7m gps and compass combo but not working car only servo work properly so can you made code for ublox 7m GPS AND COMPASS module.
hi, my freind
raj kewlani
,
did the project works with you? if yes. i hope you contact with me please.
my email: jabli717@gmail.com
snap chat: gassan_717
I use GYNEO6MV2 instead parallax . And for information I must use rx and tx pin . Am I true? can you help me please ?
Hi Hacker.....I do this project.. every thing is done but not move.what can I do bro... please help me.code is uploaded successfully.pls help me bro..and RX pin not defined in your project for GPS module.how to connect GPS RX pin to Arduino.please please help me..I hope reply from you.
I have the same problem it did not moove :(
The same and there's no answer founded :( i tried for the final project and the only thing working is the servo :D
Excuse my ignorance but could this work with a smart watch instead of a smart phone?
Cooler:30: error: 'Adafruit_HMC5883_Unified' does not name a type
Cooler:77: error: expected constructor, destructor, or type conversion before '(' token
how to remove these two errors???
Blynk app is no more compatible with bluetooth, do you have any alternative?
Hi the adafruit compass is discontinued and I purchased a different brand, would you be able to write a blog post about augmenting your code to fit other compasses?
Great Video
Hacker House , this is really awesome project.Too cool......
We have followed each and every step and connected each and every component but facing problem due to the use of neo ublox instead of PAM parallax gps.
Can u please tell us the required changes for using ublox neo gps in the program. We will be very greatful.
let me know if it worked for you using the neo-06m, because I'm also trying to do it with that module
@@adrianhernandez1654 have u worked with neo 6m gps module,i f its working pls let me know because i'm also working with the same gps moudle please me fast i dont have much time to complete the project
Hii sir..Can you send me the correct code of this plz ??
@@ajithmustargi9825 hello Broh...! Have you completed the project with neo 6m GPS module.If yes please let me know coz I am also working on it and literally i have few days to complete the project.Hope i get the positive reply from you
Is it can use in the room or outdoor?
is it possible to use a cheeper gps unit? Such as the GP-20U7
it's only $15.95 vs the rather expensive PAM-7Q at $59.95
Can this be control with a remote control handset?
where did you buy gps? help me
I need to make this now!!!!
Hold on can someone help me... so the compass module itself know where the current heading... but how can it know the distance and angle between the cooler and the android device?
Can we use ultrasonic sensor for any object
could we make it follow an air tag?
Do you need Blynk for the actual operation of the cart, or in other words, do you need a continuous internet connection?
+Ed19601 no internet connection, just coordinates streamed to the cooler
Hacker House great
@@hackershack how to connect blynk?
Is this using AoA? it seems like it
does it work inside room? like in the library
can you please explain the conection between the bluetooth and the gps?
because i don't understand why did you use the gps moudle
Hello Now I'm making it but my problem is I can't connect the Blynk app to Bluetooth when I try to connect it something Alert on my smartphone screen is " Something went wrong when connecting to your bluetooth device. Please try again later"...I can't find my mistake I'm really need your help right now
Hello, would there be any place? that you could buy a complete "Kit" to have this follow-me feature, I have a platform with payload for 200kg and I really wanted to add this electronic resource, you can help me, as I have no knowledge to develop anything about it, so I look for where to buy
gusy blynk are not supported Bluetooth module what should i do to do that??
I HAVE PLEASED THIS GREATFUL PROJECT AND I NEED THE PROJECT CODE
Currently there is no bluethooth feature in bylnk so pls provide an answer on what to do
I get an error #include
I could not find it in the library...plz reply me.
Help me
Download library in arduino app
I wonder how much weight is it able to carry?
can u please suggest other module for gps and compass
Nice channel!
will it work indoors?
how to make it work indoor ,what do i need to change to make it wook indoors with the same fuction.
thanks for a great explanation. Please do not use background music. It is a bit annoying.
I like your videos and are just wondering if you can do this for a drone if you can please can you make a video on it please
If you want to do this with a drone use Ardupilot. It is readily available and has a nice gui
Please give a diagram for the circuit
Hi good day, i love this project and i chose to do it for a school assignment and i would love it if i can get some help understanding the coding
Keon you did it or not yet ?
Hello, do you have a arduino code? I'd appreciate it if you'd help me.
How do you recharge the 3s lipo battery?
can i have the circuit design of that
Is it possible to get the correct code... Given me so much issues
Hi love this video but can you please do this to a drone and make a video on it please
I can not find the bluetooth module anywhere! On parallax it is sold out.
hey it is showing GpsParam is not declared in this scope
pls help me
How did you make that app...
I am facing problem to dump code please help me
Can it works only on Bluetooth , if we do not connected with GPS and compass module
Reply me
Don't try this project. Circuit diagram is wrong .
@@kaoserahmed4638 what is wrong on diagram
How you will get mobile gps location to the cooler
u dont
u use bluetooth to measure the distance from the cooler to the phone
then u find the location with it
any updates on this project? the new blynk app doest support bluetooth and no gps widget
Me too waiting dude
hye sir,i make this to doing my final project but the code is wrong.can u help me build the right code for arduino
my project base on gps system...detect location...follow me...and...your project...can it do the return-home-location?
Hey, body. Can you please recheck the code cause it is not working for me!
Thanks
Sooooo because your using GPS I assume this does not function indoors then??
Hai I just wanna ask , I can't connected Bluetooth in my phone so how to find the solution?
looks like the new Blynk app doe not support Bluetooth. do you have any idea how to resolve this ?
Did you ever find a solution to resolve this? I am also looking for a solution.
@@owenjarvis2118 not really
Please show circuit diagram
Why circuit diagram...it's very easy connection.
@@nawinlifehacks9978 I NEED CODE
your blynk app..which button thar u use in 9.19
Excuse me sir, I'm trying to connect the Blynk into my HC-05 Bluetooth module. But it can't be connected. I even used the library program code. It always say "Can't connect" and the other time it keep showing "connecting...". I had paired my phone bluetooth with HC05, i had paste the auth code from the email that has been sent. I've tried to use another android phone. But the result is the same. Please help me to this problem, thank you.
Sincerly,
Zahira
@Mohamed Osman not yet