pray, dost thou possess the grace to impart knowledge regarding the duration yet to unfold? How much longer must we endure this present circumstance? Eagerly do I yearn for enlightenment, for the sands of time doth slip through the hourglass, and my spirit doth long for the sweet relief of resolution.
built it for someone! It had to be modified alot but was easy to do so...but definitely outdated if anyone's gonna try this exact system. You have to move the system a bit so it can function
@opm_a-ngo2903 it looked really complicated but is genuinely easy after u understand it. If u want i can help u out especially with the modification after
Thanks to EnderPig666 for helping to design this unloader! If you have any questions or concerns, leave them here! UPDATE: I know why you guys may have trouble with the aligner conveyors, so here's a more detailed guide: From the bottom aligners that are facing upward, you place another aligner every 4.5 studs. Do this four times. From the bottom straight conveyors, place a 4x4 conveyor going *INWARD* towards the aligners (*THIS IS VERY IMPORTANT OR ELSE IT WONT WORK PROPERLY*) every 4.5 studs. Do this three times. On the fourth aligner, place an aligner facing towards where the unloader above the tarius would be. Position it 3 studs up from the last straight conveyor. When you place the furnaces on the aligner elevator, make sure that the conveyor part of the furnace *IS IN* the aligner conveyors (*ALSO VERY IMPORTANT*). Finally, don't put the wood covering thing @2:52 3 studs above the aligner, place it 6.5 studs above the aligner. That should be all!
Man I dont even get how u get to unloaders this design and well working i might build it too its realy small and my base is a refinery and I dont realy got place to build big unloaders good job on making this unloader Hope it wont break if any fixes in next updates
i followed all your instructions for an hour but for some reason it bunches up on one aligner and it all gets stuck in the furnace resulting in me fishing it out
the aligners have a cooldown now wich is why its not working as well, adding more aligners would have helped but in the recent halloween update they nerfed the tp distance so this design wont work at all
@@TwinChaosOfficial My roblox username is Luminex290. I have my friend's list open so you can friend and show me. My discord is common_commerical_chip. You can show me it in dms as well. Or we can hop in a private server, up to you!
Fine ill make a new tutorial
ill wait for it ty
pray, dost thou possess the grace to impart knowledge regarding the duration yet to unfold? How much longer must we endure this present circumstance? Eagerly do I yearn for enlightenment, for the sands of time doth slip through the hourglass, and my spirit doth long for the sweet relief of resolution.
aligner nerf broke the whole setup
built it for someone! It had to be modified alot but was easy to do so...but definitely outdated if anyone's gonna try this exact system. You have to move the system a bit so it can function
Oof my brain is too small for this
@opm_a-ngo2903 it looked really complicated but is genuinely easy after u understand it. If u want i can help u out especially with the modification after
Thanks to EnderPig666 for helping to design this unloader! If you have any questions or concerns, leave them here!
UPDATE: I know why you guys may have trouble with the aligner conveyors, so here's a more detailed guide:
From the bottom aligners that are facing upward, you place another aligner every 4.5 studs. Do this four times.
From the bottom straight conveyors, place a 4x4 conveyor going *INWARD* towards the aligners (*THIS IS VERY IMPORTANT OR ELSE IT WONT WORK PROPERLY*) every 4.5 studs.
Do this three times.
On the fourth aligner, place an aligner facing towards where the unloader above the tarius would be. Position it 3 studs up from the last straight conveyor.
When you place the furnaces on the aligner elevator, make sure that the conveyor part of the furnace *IS IN* the aligner conveyors (*ALSO VERY IMPORTANT*).
Finally, don't put the wood covering thing @2:52 3 studs above the aligner, place it 6.5 studs above the aligner.
That should be all!
hey can i join u in a server or can u friend me Miky_playsroblox I'm confused what you mean
IT SAYS NO SPACE WHEN I PUT THE FURNACE
@@ylebedev move it up a bit
@@feesherofmanwhat's the use of last 2 aligner and 2 incline conveyor 3:57
Finnaly after long time 🎉🎉🎉🎉
Thank you ❤
Man I dont even get how u get to unloaders this design and well working i might build it too its realy small and my base is a refinery and I dont realy got place to build big unloaders good job on making this unloader Hope it wont break if any fixes in next updates
@@Enemy_of_eternity I got help from enderpig666
bruh this is going so fast i cant understand nothing
Use youtube playback speed
really cool
Thank you so much
If you are wondeting why u messed up the voice over is wrong and missed some wall measurements and gave wrong ones
YAY🎉
i will never build from him tryed everything and didntwork
W
I made it and the coveryor aligners bearly work the ore just gets stuck on them and it jams due to it.
i followed all your instructions for an hour but for some reason it bunches up on one aligner and it all gets stuck in the furnace resulting in me fishing it out
Same for me
the aligners have a cooldown now wich is why its not working as well, adding more aligners would have helped but in the recent halloween update they nerfed the tp distance so this design wont work at all
its not working
i built this exactly as the video shows and ores struggle to go up the elevator, and sometimes when they do, they dont smelt
Check out my pinned comment!
@fisherman make a new auto unloder
please
Lol dude soo easy now my old auto unloader are nothing😭
i see your new vid at 6 min ago xd
how to select multiple thing in hammer?
hold down ctrl
Is it because of the new update that it no longer works? :(
Which one?
Also I haven't played in a long time :(
@@feesherofman This auto unloader
@@elzombietrolleloficial5834 BRUHHHHHHHHHHHHHHHHHHHH
im just gonna go ask ender
@@feesherofman Is it that the transporter aligner is slow, or I don't know if it's because I have a lot of voltshard and blastshard in my base
@@flk_jose987 every ore has a kind of a teleport cooldown now. If you still want to run this setup just add more elevators ig
How much is the total cost for the auto unloader!?
It no longer works🎉🎉🎉
Can you do a wood unloder?
@@SamDow2021 I already have that planned ❤️
@@feesherofman W❤
discord server? thanks
how did you get wire
u just connect 2 things, thats it
u don't need to buy
does it work with the wood stripper things
No but I already have an idea in mind
No but I have an idea in mind
doesnt work that much
How so? Did you build it correctly?
@@memes_4life.9 Ask your friend - did he position the aligners correctly, like how I did in the video?
@@memes_4life.9 I think I just found out why the ores wont come out
@@memes_4life.9 Tell your friend to look at the pinned comment
@@memes_4life.9 ? u werent
How can I change the settings on cell phone?
@@AngelGarcia-rm4xy try to tap the delay circuit, if that's what you mean!
@@feesherofman Thanks, but that's not what I meant. I meant to change the number to turn to a specific number @2:28
@@AngelGarcia-rm4xy oh, you can't on mobile?
@@feesherofman No, I have tried many ways and I can't
@@AngelGarcia-rm4xy can u get a friend to help?
bruh tell people that it is outdated the aligner nerf ruined this build now I lost all my time and money
lol
Barely works blud, I built a better one
@@TwinChaosOfficial My roblox username is Luminex290. I have my friend's list open so you can friend and show me.
My discord is common_commerical_chip. You can show me it in dms as well. Or we can hop in a private server, up to you!
@@feesherofman hey blud don’t tag me on discord blud I’ll add you later and we can play blud
is it bad if i have bad fpd
fps*
W
W