I Loved your step by step narration about what was happening. That spoke my language. I’m sitting here at home Waiting Impatiently for my Fed Ex delivery of my Glowforge Aura !!!!!
I have one of the larger Glowforges that I bought a few years ago. I don't use Glowforge materials much because of the high cost, but I do know from talking with friends that cut laser kits for a living that I can use other woods & materials. To keep the char to a minimum, I use masking tape on rolls that I purchased from Amazon that works with the laser. I vent my cutter to the outside using a window vent kit made for a clothes dryer. I just relocated the security system sensor a little upward so my security system still works, and I added a lock to keep the window down on the vent. HOWEVER, you will still get the smell of burning wood/paper/etc., so place it in a room that is not near the main living area if you put it in your house. NOTHING is going to stop that smell if you have it inside.
Something will stop that smell if you have it inside! A powerful 6" inline fan - instead of relying on the built-in Glowforge fan. That's what I have on Glowforge Pro and I have zero smell inside. It's vented through a metal window vent that's sealed around the window frame and insulated. Also be sure your existing GF fan is clean and its grill not impair airflow. Check the GF community for details on potentially removing the existing fan grill and/or fan to improve airflow when combined with an external inline fan.
Can you use clear acrylic material if you put colored tape on it? The video lost me at not being able to cut clear acrylic as that is what my preferred use would be. ☹️
@@03581356 Moderate and low power diode based lasers, like the Aura, are not able to cut clear acrylic. You may be successful at engraving it using a surface treatment but you will not be able to cut it. This is a fundamental limitation of the laser frequency and power being used.
@@03581356 No. This type of laser isn't physically capable of cutting clear acrylic because the wavelength just passes through it. If you did that, it would only cut the tape.
Thanks I follow you for other crafts you do. I just purchased my aura and was looking for videos on use and you cropped up. so glad to see a familiar face using this.
I’ve been eyeing glowforge for a while now but the price has kept me away. SO excited to see this little crafter’s version at a cheaper price! Thanks for such an informative video!
So glad I found you! Got my Aura today and can’t even figure out the paper box, ugh. I use a Cricut but this software isn’t intuitive. I would like to see a more detailed “how too” with the Glowforge software.
Hi Angie! Just seeing this video. Thanks so much for your time. I am trying to convince my husband that I NEED this. 😆 😆 I have always been a crafter but between school, full-time work and 4 girls (including 11yoa triplets) I have never been able to make the time. I am getting closer to retirement but I will still most definitely need to keep an income until my girls are a bit older. Crafting I think is the way I could do what I love with an additional bonus. I am no subscribed to your channel and can't wait to see all the things you (we) 😉 will do!!! ❤ ❤
you are extremely thorough!!! Love this info, soooo helpful as the key element that I'm concerned about is ventilation. I dont' want to have a window open...that would be a pain. thanks for all the info!!!
Great review!! Thank you. I would to see a video on how to do larger projects using the pass through slots on each side. Maybe like a 3’ welcome cut or engraving.
Angie, you are literally the only UA-camr I will trust when deciding whether to purchase something! Your new product videos are perfection! I think I might definitely buy the Glowforge Aura!!
You will regret if you buy this machine, Aura is a 6w diode machine, not a CO2 LASER MACHINE, the power is very low, the work space is small, you can buy a whole 10w diode lasers sistem with less money, with more work area, Air assist, rotary tool for Steele bottles, faster and more powerful, with enclosure an smoke extractor included!! This Aura machine is a rip off!! Just need to investigate a little in the internet and you will know what aim talking about!!.
Thanks for this video! Would love to see engraving. I definitely want to get this when my budget allows or if it ever goes on sale. I think it would be fun to make Christmas ornaments.
Thank you Angie for your VERY thorough review! When there's new products or techniques, I always go to your channel for explanations and detailed videos. You helped me through a converted epson sub printer catastrophe!!!! I am adding this laser cutter to my bucket list of must-have craft tools/machines!! Can you do a video laser-cutting very intricate, small wood items - for example: jewelry (like a name), ornament, key chain? And also a video on engraving on wood very intricate designs for like a jewelry box or on jewelry? Thanks again!
Thank you! I was starting to regret getting this machine because it has limitations compared to the bigger glowforges but they have a bigger price tag as well. Do you have more videos on how to use their software? I would love to learn more on how to use my own designs, perhaps some from my silhouette software.
Thank you Angie. Really wish it was in my budget 😢. I'm tapping out of crafting. 😢. Over a 6 year time period, I have spent over $7k in a combination of leather products because i wanted to make handmade goods like purses, bags, wallets, and other real leather related products. Then add an additional $4k-5k in misc. random crafting supplies like vinyl, paint, sublimation iron ons, resin. Enough. I just paid off my Solo cutter thats costs $400 and i only used it 3x's so far, i still have a Sizzix eclipse2 in the box never used. I can't do it anymore 😪. But i don't fault you for your positivity and creativity. Time for me to start doing something so i can destash, sell, and end my bad behaviors. Trust that this eye candy is a struggle to pass on. 😊.
Sounds like you are having a challenging time deciding what it is that you really want to dive into and are buying all the things only to lose interest in working with them. Before you destash (if you haven't already done so), take one of your pieces of equipment and really learn all there is to learn about it and make a wide variety of items. If you decide it's really not your thing, then get rid of it :)
Hi Angie, l have watched a few glowforge reviews and out of them all l would definitely say that you covered a lot more than any other reviewer. You were straight to the point with no fluffing about and you also explained what would or could happen. This was a direct to the point review and l am amazed at all the things tbat it can do. Thankyou kindly for sharing your knowledge of the glowforge aura machine and your time in making this review, l appreciate it.
Thank you for this very descriptive and informative video. I just purchased the GF Aura and now I can't wait to try it out. I'm sure I will continue to reference your video :)
Thank you so much for your dedication to doing these videos. I just purchased this machine yesterday and the filter. I'm glad I found your video made me a lot more comfortable in buying this and I understand now what can be done with it. Thanks so much
Hi Angie! This looks like the perfect Crafter's Laser. Thank you for the to the point Demo. Can't wait to see what you make in upcoming Tutorials. Happy Crafting!🤗
I have wanted a Glowforge for years but just could not justify the price especially when they raised all the prices on the 3 model's by $1000 each. This is so much more affordable, this is going on my Christmas list. How much is it to subscribe?
This machine seems SLOOOOOW. I thought this would be a great alternative for the money.... but I almost feel it would be worth the extra coin to upgrade the laser? What was the time on the coaster? 22 minutes seemed like a lot for something seemingly simple. Otherwise, I like the size and the all-in-one housing.
This is a great thorough informational video! Really appreciate your efforts in telling us how it works and what it does! I do have a question! For material like fabric, or materials that may not have the masking already on it, what kind of masking would you recommend? Or just any works? Ill be using this for fabric and other similar products. Also, Id like to see fabric projects both cutting and engraving! Thank you!
@@AngieHolden Yes please!! I'm so curious! And I'm actually amazed how GlowForge youtube doesnt have a video on all the works with cutting and scorching fabric. Least I couldnt find any, nor anyone trying it out. But you are so informative and educational that I'd watch your first regardless, lols!
The proofgrade label appeared straight on the wood. @ 21:18 the label was crooked when viewed on screen, indicating a fish-eye lens is still being used, and again, alignment will be an issue when trying to do precise cuts and engraves on blanks.
@@AngieHolden I understand. I am saying that the fisheye lens has always caused alignment issues with cut on all other glowforge machines, and before you cat anything, the view in the glowforge software shows the barcode distorted (As usual) To truly show that this is not an issue, you would need to place a 1-2 inch circle in one of the corners, add a small circle to the center of that blank, using the onscreen lid camera, cut or engrave that circle, and have the result be perfectly centered. This is not likely to happen. This is not a reflection on YOU, but on the glowforge hardware/software still having inherent flaws.
Can you please do a review on cutting very small intricate cuts on paper. The cricut does not do well when cutting very very small shapes. It always tears the paper or ruins the paper when turning a corner. I'm talking about small projects that are around 3" and have intricate cuts within that small space. Thanks
I have been wanting a Glowforge for my classroom but they were too expensive. I would like to see cutting projects that would correspond with my welding class.
Interesting release for business fellas but price is just a little high for my bank account to allow me to spend as a hobby. A lot releases but not enough money to keep up with all this don’t even thinking about materials’s prices who ever can afford enjoy it I love my Maker 😁
Yes, I was hoping it to be more cheaper or like around the price of the cricut machines but it’s a little high really wanted to get a cricut machine but I still haven’t got it because it’s still too much for just a hobby
I would love to see how to engrave things like laptops, etc. and more information on that. It seems to me that the heat would damage your computer. Looks like an amazing machine.
Kinda bummed about the clear acrylic being what to avoid... hope there will be a work around soon. I would love to see this make some leather tags for hats. I saw that you made one, but would love to see the process. And can you use faux leather or just certain ones? Thanks.
i can cut a lot of them on my cricut, so just to cut some thin wood to cut out words, i could probably go with a less expensive product...right? but i would like to engrave. Hmmmm, i need to shop around and make sure i would really use all features that this cost would entail.
Thank you Angie for this tutorial. Very well done. I do have a glowforge machine and it’s a great machine but what I don’t like is that glowforge locks you in to their materials and their program. And all of their material are very expensive. This price point is not bad but not everyone will be able to afford all that you would need for a hobby machine. Looking forward to your new projects.
Thank you for your informative video, as always. I would really love to see writing and engraving on leather videos. I tried making dog tags with the cricut maker and finally had to abandon it.
Thank you for the great video, I bought the Aura but haven't opened it because so many negative comments. Could you link a place to buy usable material. Joann and Michael's are currently out near me.
Angie, thank you for such a clear calm and thoughtful presentation of this product. Have been curious about how they work, but the warning to keep a fire extinguisher nearby will deter me at this time. 😊 However I am VERY interested in learning from the ground up how to use my Cricut Maker! Please point me directly to whichever is your best pre-beginner/entry level most basic instructional video for a crafter without deep computer skills or experience in Cricut terminology. Thanking you in advance! 😊
I live in a coop building apt, and was wondering if there are still some fumes even with the add-on filter? Is the filter less noisier than what you sampled - I know the mic amplifies noise, but was curious. Some people said when you open the lid, it still emits a smell for a bit. What's your take on this? I'm so close to buying one, but admittedly, when you said keep a fire extinguisher nearby, I got paranoid. In any case, thank you for this detailed, informative video! You're awesome!
Thank you so much for your review. People forget that lasers have been around for quite a while I had been in the laser business since 1987 and back then a laser was the size of a 2-car garage and would set you back about 150 Grand! Very nice to see this unit!
Wow! I remember in my first job the computer was in a room of its own and the keyboard was basically desk sized. This giant machine used floppy disks and took two different disks to generate one set of accounts 😂 You could probably almost do the same on an app now
Yes! I was planning to get an xTool and then found out a couple of weeks ago about this machine. I know on some of the xTool machines you can engrave cups. I’d love to get one of these but need to figure out pricing for proof materials and filter replacement.
I am planning to doing linoleum block printing. It needs a shallow cut (not all the way through) image on a semi-flexible substrate. The substrate doesn’t have to be linoleum but must be somewhat flexible and be able to hold ink. The thickness of the substrate can be as little as 1/8 inch, but 1/4 would be better. Will this printer do that? Thanks!
That is a really cool machine! It would so much fun to play with! I would love to see anything that is engraved. I have a thing for coasters, so that would be great to see.
Great video, Angie. I would like to see some engraved earrings & personalized ornaments in a future video. One question: do you need the premium to upload svg files in the software?
Wonderful video… thank you! I would love to see fabric cut ( could use it for appliqués ) also, will it cut fabric with heat & bond light ironed on the back? I assume you would not want to use a metallic fabric, also ? Thanks!
I Loved your step by step narration about what was happening. That spoke my language. I’m sitting here at home Waiting Impatiently for my Fed Ex delivery of my Glowforge Aura !!!!!
Good luck!!
I have one of the larger Glowforges that I bought a few years ago. I don't use Glowforge materials much because of the high cost, but I do know from talking with friends that cut laser kits for a living that I can use other woods & materials. To keep the char to a minimum, I use masking tape on rolls that I purchased from Amazon that works with the laser. I vent my cutter to the outside using a window vent kit made for a clothes dryer. I just relocated the security system sensor a little upward so my security system still works, and I added a lock to keep the window down on the vent. HOWEVER, you will still get the smell of burning wood/paper/etc., so place it in a room that is not near the main living area if you put it in your house. NOTHING is going to stop that smell if you have it inside.
Something will stop that smell if you have it inside! A powerful 6" inline fan - instead of relying on the built-in Glowforge fan. That's what I have on Glowforge Pro and I have zero smell inside. It's vented through a metal window vent that's sealed around the window frame and insulated. Also be sure your existing GF fan is clean and its grill not impair airflow. Check the GF community for details on potentially removing the existing fan grill and/or fan to improve airflow when combined with an external inline fan.
@@CLTGeek Thank you! I’m going to do that.
Can you use clear acrylic material if you put colored tape on it? The video lost me at not being able to cut clear acrylic as that is what my preferred use would be. ☹️
@@03581356 Moderate and low power diode based lasers, like the Aura, are not able to cut clear acrylic. You may be successful at engraving it using a surface treatment but you will not be able to cut it. This is a fundamental limitation of the laser frequency and power being used.
@@03581356 No. This type of laser isn't physically capable of cutting clear acrylic because the wavelength just passes through it. If you did that, it would only cut the tape.
Great demo! I got the Glowforge Aura for Christmas and can't wait to try it. You make it look so easy and less intimidating to get started. Thank you!
Thanks I follow you for other crafts you do. I just purchased my aura and was looking for videos on use and you cropped up. so glad to see a familiar face using this.
Awesome! Thank you!
I just got my Glowforge Aura set up and am really interested in learning the ins and outs of custom designs
I’ve been eyeing glowforge for a while now but the price has kept me away. SO excited to see this little crafter’s version at a cheaper price! Thanks for such an informative video!
You are so welcome!
Same. The price but also the fact it needs proper ventilation and needs a proper set up for safety measures.
Hi Angie, great information 😊. I would like to see how it would cuts a rubber stamp. 🤔
That is on my list but I haven't tried it!
Thank you! I've been scared of trying out a laser cutter but your video really breaks it down and makes it seem doable!
You can do it!
So glad I found you! Got my Aura today and can’t even figure out the paper box, ugh. I use a Cricut but this software isn’t intuitive. I would like to see a more detailed “how too” with the Glowforge software.
Oh I can do that!
@@AngieHolden oh good. Just got minee last week and would like to know also. Also confused about setting it up with the wifi
i was so intimidated by this machine until i watched this video! excellent and very informative
Great to hear!
I’d love to see you make a puzzle!
Hi Angie! Just seeing this video. Thanks so much for your time. I am trying to convince my husband that I NEED this. 😆 😆 I have always been a crafter but between school, full-time work and 4 girls (including 11yoa triplets) I have never been able to make the time. I am getting closer to retirement but I will still most definitely need to keep an income until my girls are a bit older. Crafting I think is the way I could do what I love with an additional bonus. I am no subscribed to your channel and can't wait to see all the things you (we) 😉 will do!!! ❤ ❤
Thanks for subbing and welcome!
Thank you your videos are always good. I would love to see card stock cutting. Thanks again Angie for your time.
Noted!
I would love to learn more about using GlowForge for fabric/quilting. Thanks:)
Noted!
you are extremely thorough!!! Love this info, soooo helpful as the key element that I'm concerned about is ventilation. I dont' want to have a window open...that would be a pain. thanks for all the info!!!
You would just need to also purchase the air filter.
You do a wonderful job with your tutorial videos. For a beginner wanting to learn I will definitely be following you! Thank you!
Thanks for watching!
Great review!! Thank you. I would to see a video on how to do larger projects using the pass through slots on each side. Maybe like a 3’ welcome cut or engraving.
Noted!
Can’t wait to get mine should be here in the next few days so excited 😊 would love to see more videos of other things you can create
I have several videos now. Any Spark or Aura videos on my channel can work with the Aura machine!
Thank you so much for making this video! You’re very thorough with everything!! 😊
Glad it was helpful!
Angie, you are literally the only UA-camr I will trust when deciding whether to purchase something! Your new product videos are perfection! I think I might definitely buy the Glowforge Aura!!
Yay! Thank you!
You will regret if you buy this machine, Aura is a 6w diode machine, not a CO2 LASER MACHINE, the power is very low, the work space is small, you can buy a whole 10w diode lasers sistem with less money, with more work area, Air assist, rotary tool for Steele bottles, faster and more powerful, with enclosure an smoke extractor included!!
This Aura machine is a rip off!! Just need to investigate a little in the internet and you will know what aim talking about!!.
Thanks for this video! Would love to see engraving. I definitely want to get this when my budget allows or if it ever goes on sale. I think it would be fun to make Christmas ornaments.
Glad it was helpful!
Thank you Angie for your VERY thorough review! When there's new products or techniques, I always go to your channel for explanations and detailed videos. You helped me through a converted epson sub printer catastrophe!!!! I am adding this laser cutter to my bucket list of must-have craft tools/machines!! Can you do a video laser-cutting very intricate, small wood items - for example: jewelry (like a name), ornament, key chain? And also a video on engraving on wood very intricate designs for like a jewelry box or on jewelry? Thanks again!
Love to see how to use the software I’m new to this
Coming soon!
Hope to see more videos on using this and software
Coming soon! I have a bunch of content planned!
Very interesting and informative. If roy are able to etch glass on this machine I would love to see if done sometime.
You cannot etch glass as it would fall under that "no clear things will work" statement.
Great video Angie!
Loved the video!! I treated myself to one today I took advantage of the $200 off for the holidays. I can’t wait to get it.
YAY! Happy crafting!
@@AngieHoldenthank you received it today 😊
Thank you! I was starting to regret getting this machine because it has limitations compared to the bigger glowforges but they have a bigger price tag as well. Do you have more videos on how to use their software? I would love to learn more on how to use my own designs, perhaps some from my silhouette software.
Try this: ua-cam.com/video/e0VAKEZ-cVI/v-deo.html
Thank you Angie.
Really wish it was in my budget 😢. I'm tapping out of crafting. 😢.
Over a 6 year time period, I have spent over $7k in a combination of leather products because i wanted to make handmade goods like purses, bags, wallets, and other real leather related products. Then add an additional $4k-5k in misc. random crafting supplies like vinyl, paint, sublimation iron ons, resin. Enough. I just paid off my Solo cutter thats costs $400 and i only used it 3x's so far, i still have a Sizzix eclipse2 in the box never used. I can't do it anymore 😪.
But i don't fault you for your positivity and creativity. Time for me to start doing something so i can destash, sell, and end my bad behaviors. Trust that this eye candy is a struggle to pass on. 😊.
Sounds like you are having a challenging time deciding what it is that you really want to dive into and are buying all the things only to lose interest in working with them. Before you destash (if you haven't already done so), take one of your pieces of equipment and really learn all there is to learn about it and make a wide variety of items. If you decide it's really not your thing, then get rid of it :)
Great review. I would like to see you cut acrylic for earrings. Thank you.
Will do!
Thank you! I'm looking forward to seeing your video tutorials. This is the perfect machine for me.
Great to hear!
Hi Angie, I would love to see you make something on fabric.
I am sure that is coming soon!
Hi Angie, l have watched a few glowforge reviews and out of them all l would definitely say that you covered a lot more than any other reviewer. You were straight to the point with no fluffing about and you also explained what would or could happen. This was a direct to the point review and l am amazed at all the things tbat it can do. Thankyou kindly for sharing your knowledge of the glowforge aura machine and your time in making this review, l appreciate it.
Thanks for the great comment!
Good afternoon Angie? You you us glowforge on t-shirts?
Thanks Angie. Can’t wait to see more videos on this.
More to come!
Thank you for this very descriptive and informative video. I just purchased the GF Aura and now I can't wait to try it out. I'm sure I will continue to reference your video :)
I hope you love it!
Thank you! I tried to make my first project yesterday and was completely confused! I think I need more tutorials :0@@AngieHolden
More to come!
Thank you!!@@AngieHolden
Great video ... lots of information. That said, I'm glad I also watched the UA-cam video titled: Glowforge Aura Part 5: What’s That Smell?
Thanks for your thorough review! Very informative!
Glad it was helpful!
Making 3D project. Like to see Cutting woods more. Thank you for sharing.
More to come!
Thank you so much Angie.... I was thinking to buy one laser machine but couldn't decide....cant wait to see you do more projects on Glowforge Aura:)
More to come!
Wow. This is a game changer!!!!!! Thanks for the review Angie. You are the best!!!!
Glad it was helpful!
I JUST learned of this new laser cutter from Glowforge yesterday! This was an excellent tutorial Angie, thank you so much!!!
You are so welcome!
Thank you so much for your dedication to doing these videos. I just purchased this machine yesterday and the filter. I'm glad I found your video made me a lot more comfortable in buying this and I understand now what can be done with it. Thanks so much
Glad I could help!
I would love to see etching on leather. I want to make my own bag tags that I will sew onto my bag projects.
I showed one in this video but I have plans for more soon!
Hi Angie! This looks like the perfect Crafter's Laser. Thank you for
the to the point Demo. Can't wait to see what you make in upcoming
Tutorials. Happy Crafting!🤗
You are so welcome!
Hi Angie, thank you for the tutorial, this looks like an amazing (affordable) laser cutter. Can you cut Gold Mirror Acrylic? Rose Gold? Silver?
Any reflective acrylic may have issues as well with a diode laser.
I’d love to see how it cuts cardstock and fabric.
I have wanted a Glowforge for years but just could not justify the price especially when they raised all the prices on the 3 model's by $1000 each. This is so much more affordable, this is going on my Christmas list. How much is it to subscribe?
Thanks for this video! Ive been contemplating a Glowforge and you made it feel less scary!
Glad I could help!
This machine seems SLOOOOOW. I thought this would be a great alternative for the money.... but I almost feel it would be worth the extra coin to upgrade the laser? What was the time on the coaster? 22 minutes seemed like a lot for something seemingly simple. Otherwise, I like the size and the all-in-one housing.
It is slow as it is a low watt laser.
Makes sense. Thanks for the reply!@@AngieHolden
This is the video I was waiting for!
Yes!!
This is a great thorough informational video! Really appreciate your efforts in telling us how it works and what it does! I do have a question! For material like fabric, or materials that may not have the masking already on it, what kind of masking would you recommend? Or just any works? Ill be using this for fabric and other similar products.
Also, Id like to see fabric projects both cutting and engraving! Thank you!
I have a fabric video on my list! I also need to do a video on masking as I did find a good one!
@@AngieHolden Yes please!! I'm so curious! And I'm actually amazed how GlowForge youtube doesnt have a video on all the works with cutting and scorching fabric. Least I couldnt find any, nor anyone trying it out. But you are so informative and educational that I'd watch your first regardless, lols!
Ty for your awesome informative videos. But my question is how different is this from the x-tool?
I actually do not have an xtool so that is hard for me to answer. Look for a video from Hey Let’s Make Stuff on that soon!
Could you cut your own sublimation blanks from MDF for Sublimation with this machine? I'm thinking small items like earrings.
I am thinking the same thing! One of the reasons I was excited about it!!
Thank you so much. So convinced now that I need one. You explain so well. Thank you x
Glad it was helpful!
I wish they would ship these to australia!
The proofgrade label appeared straight on the wood. @ 21:18 the label was crooked when viewed on screen, indicating a fish-eye lens is still being used, and again, alignment will be an issue when trying to do precise cuts and engraves on blanks.
Please note that I film from many angles and piece them together to get a full video. That means I cut the same thing several times.
@@AngieHolden I understand. I am saying that the fisheye lens has always caused alignment issues with cut on all other glowforge machines, and before you cat anything, the view in the glowforge software shows the barcode distorted (As usual) To truly show that this is not an issue, you would need to place a 1-2 inch circle in one of the corners, add a small circle to the center of that blank, using the onscreen lid camera, cut or engrave that circle, and have the result be perfectly centered. This is not likely to happen. This is not a reflection on YOU, but on the glowforge hardware/software still having inherent flaws.
Great video thank you. Our glowforge is new out of the box but it is not showing the live view. Is there a setting we need to change?
You should not have to change any settings. Did you connect the two yet via the wifi connection? They do have to be connected.
Good video. I would like to see you cut leather large enough that it needs the pass-through. Interested in this or Venture for bag pattern pieces.
Looking forward to it being available in the UK
Can you please do a review on cutting very small intricate cuts on paper. The cricut does not do well when cutting very very small shapes. It always tears the paper or ruins the paper when turning a corner. I'm talking about small projects that are around 3" and have intricate cuts within that small space. Thanks
I haven't tried paper yet but it is on my list!
I have been wanting a Glowforge for my classroom but they were too expensive. I would like to see cutting projects that would correspond with my welding class.
Noted!
Interesting release for business fellas but price is just a little high for my bank account to allow me to spend as a hobby. A lot releases but not enough money to keep up with all this don’t even thinking about materials’s prices who ever can afford enjoy it I love my Maker 😁
I'm sticking with my Cricut Maker too
I have a question. Does the Cricut Maker cut acrylic?
Yes, I was hoping it to be more cheaper or like around the price of the cricut machines but it’s a little high really wanted to get a cricut machine but I still haven’t got it because it’s still too much for just a hobby
@@TheLittlebeth yes it does
But it eventually pays for itself. I want the glow forge pro. It’s 7k. Sheesh. I’m keeping hope alive lol.
I would like to know more about the types of material it can cut. Especially, brands of acrylic other than glow forge.
Wow, very informative. Thank you!
Glad it was helpful!
Wow, thank you for this amazing video!!!
Glad you liked it!
I would love to see how to engrave things like laptops, etc. and more information on that. It seems to me that the heat would damage your computer.
Looks like an amazing machine.
That project makes me so nervous!!
want to see how these cut out applique patterns from fabric
Try this: ua-cam.com/video/3zOlKpBWANM/v-deo.html
That was a great, detailed review! Thank you!
Way cool. Have you tried to engrave on denim? It is listed on their site.
I haven’t tried but saw someone that did. It does make it super thin in those areas.
Hi, excellent video, but I still have a question. Can this laser cut mirror-type acrylic?
I have not tested a wide range of acrylics.
Kinda bummed about the clear acrylic being what to avoid... hope there will be a work around soon.
I would love to see this make some leather tags for hats. I saw that you made one, but would love to see the process. And can you use faux leather or just certain ones? Thanks.
Should be laser safe leather or leather with no chromium.
What a fun little thing May I have to get me one
i can cut a lot of them on my cricut, so just to cut some thin wood to cut out words, i could probably go with a less expensive product...right? but i would like to engrave. Hmmmm, i need to shop around and make sure i would really use all features that this cost would entail.
This can do things a Cricut cannot do.
Thank you Angie for this tutorial. Very well done. I do have a glowforge machine and it’s a great machine but what I don’t like is that glowforge locks you in to their materials and their program. And all of their material are very expensive. This price point is not bad but not everyone will be able to afford all that you would need for a hobby machine. Looking forward to your new projects.
You can use other materials you will just need to experiment with settings.
Thank you for your informative video, as always. I would really love to see writing and engraving on leather videos. I tried making dog tags with the cricut maker and finally had to abandon it.
Great suggestion!
Thank you for your video, may you cut white acrilic?thank you!
White can be tricky or impossible with a diode laser like this one.
I love this! I've been wanting a laser but not the learning curve or price involved. Definitely going on my Christmas list!
Go for it!
You and me both!
Thanks for another informative video. 💜
Any time!
Thank you for the great video, I bought the Aura but haven't opened it because so many negative comments.
Could you link a place to buy usable material. Joann and Michael's are currently out near me.
You can buy any Glowforge Proofgrade material to get started.
Angie, thank you for such a clear calm and thoughtful presentation of this product. Have been curious about how they work, but the warning to keep a fire extinguisher nearby will deter me at this time. 😊
However I am VERY interested in learning from the ground up how to use my Cricut Maker! Please point me directly to whichever is your best pre-beginner/entry level most basic instructional video for a crafter without deep computer skills or experience in Cricut terminology. Thanking you in advance! 😊
Of course! Try this: ua-cam.com/video/gn8tmXezWT8/v-deo.html
Can't cut clear acrylic. No Aura in my future.😢
Hey Beautiful, I will be getting this one, thank you for your videos, love ya!!!
Hope you like it!
Thank you for this amazing informative video !! Does it cut white and mirror acrylics?
I have not tested all acrylics but chances are those will be too light.
Please I'd like to see you do all the things. I'm on the fence right now. 😬
GREAT VIDEO as always can you please show us a example of a image of say like your animal or person done by this machine please and thank you.
I saw Jennnifer Maker do one but I haven't yet!
Please make a Stanley cup topper using glowforge
This baby is impressive and I’m so ready to buy. Are you able to engrave flasks which are about 2 inches thick?
Engraving objects should be flat and no more than 3/4 inch thick.
@@AngieHolden thank you Dear!
Thank you for this wonderful video! Makes me want one even more! I would like to know if it cuts felt for felt flowers?
Hmmm. I know it says fabric. I would need to test that!
I live in a coop building apt, and was wondering if there are still some fumes even with the add-on filter? Is the filter less noisier than what you sampled - I know the mic amplifies noise, but was curious. Some people said when you open the lid, it still emits a smell for a bit. What's your take on this? I'm so close to buying one, but admittedly, when you said keep a fire extinguisher nearby, I got paranoid. In any case, thank you for this detailed, informative video! You're awesome!
It does still smell some. I would run an air purifier in the room. It is somewhat noisy but probably not louder than your television.
Thank you so much for your review. People forget that lasers have been around for quite a while I had been in the laser business since 1987 and back then a laser was the size of a 2-car garage and would set you back about 150 Grand! Very nice to see this unit!
You are so welcome!
Wow! I remember in my first job the computer was in a room of its own and the keyboard was basically desk sized. This giant machine used floppy disks and took two different disks to generate one set of accounts 😂 You could probably almost do the same on an app now
Angie, you always have Great reviews!! Looks like a super machine!
It is!
I wish you could review the xtool M1
I feel t like it does so much more than this one!
Also, I loved your video! Thanks!
I may do that in the future but I like to take my time with each machine and REALLY use it before moving on to another.
Yes! I was planning to get an xTool and then found out a couple of weeks ago about this machine. I know on some of the xTool machines you can engrave cups. I’d love to get one of these but need to figure out pricing for proof materials and filter replacement.
@@kristyhuber7835 All xTool machines can engrave cups and DO NOT require an Internet connection.
I am planning to doing linoleum block printing. It needs a shallow cut (not all the way through) image on a semi-flexible substrate. The substrate doesn’t have to be linoleum but must be somewhat flexible and be able to hold ink. The thickness of the substrate can be as little as 1/8 inch, but 1/4 would be better. Will this printer do that? Thanks!
I have seen people making stamps with this but I haven't tried it. I think that would be a similar material and process.
Hi Angie. I liked the video. Was very informative. How about earrings or a keychain.
Great idea!!
Hi Angie, you mentioned that you can't cut clear acrylic, is there a reason why? Also, how about engraving on clear acrylic?
You will not be able to cut or engrave it. The laser is just not powerful enough.
So cool! I would love to see fabric 🥰
Coming soon!
That is a really cool machine! It would so much fun to play with! I would love to see anything that is engraved. I have a thing for coasters, so that would be great to see.
Sounds great!
Very informative, TFS.
Glad it was helpful!
Great video, Angie. I would like to see some engraved earrings & personalized ornaments in a future video. One question: do you need the premium to upload svg files in the software?
Just looked it up and it seems it is SVG files over a certain size. My guess would be storage on their servers.
Thanks, I appreciate your reply.
Wonderful video… thank you! I would love to see fabric cut ( could use it for appliqués ) also, will it cut fabric with heat & bond light ironed on the back? I assume you would not want to use a metallic fabric, also ? Thanks!
I need to do some testing but that is on my list!