Great great great video! I've been struggling for so long trying to do a barn table with a similar leg profile. That copy/rotate trick of yours is just so well thought! Keep on going!
Thanks for all your work putting these videos together. For me, it would have been helpful for you to go into a little more detail regarding using the rotate tool and the referencing you used. Also possibly an alternative method for the same result. Great vid!
I've gotten to the point that i'm rotating the first leg, but when i select it and rotate 90 degrees, it doesn't line up with the first leg at all. I've used the midpoint references on the edge of the seat and in the middle of it, but it won't line up. any ideas why? EDIT: nevermind. I was clicking on the edge instead of the center of the seat so it was off by a half inch
I downloaded SU 2022 Pro and trying to recreate this stool. Drawing the seat, legs no problem. but I cant rotate and copy the leg. I select the leg , use the rotate to set the rotation but it does not move the leg?
This was super helpful and made my life a lot easier! However, I'm having a problem flaring out the edges, when I select the move tool it only wants to go along the blue axis and I can't figure out how to get...access to the other axes. :) I do have the bottom of the legs selected as well. Thank you!
Hope this isn't too late. I'm just finding these videos recently and going through the ones that interest me...Oscar is right, there are extensions to do fillets quickly and easily. 1001 bit tools is one, Tig also has '2d tools' which can do fillets plus so much more.
im watch this because im very new and wanted to know 2 things how to have bevels or angled legs but i cant figure out how to save and rotate , rotate yes but you didn't explain how to save ....i have a mac and a pd> thanks pat
I had an idea: I tried to use Scale to shrink down the cross piece after I made it so I could move it up. It scaled it down (because the angles made it a pain in the butt...) but I couldn't snap to the edge of the stool leg. Why won't it snap to things?
When I make it a component it will not move on an angle, it only moves side ways, is there something I'm doing wrong? I had to make it a non-component and do it all manually.
I am on a mac, and using sketchup for schools. tapping the control key doesn't seem to make copies, and it isn't clear to me how to get the rotate tool to "grab" the leg
You can use the protractor tool to establish a new guide line at whatever angle you want, using the outer top edge of the leg as a reference point, and then move the bottom face of the leg outward to touch the guide line you created.
I want to understand that "make component" and "make group" 2 fuctions , what's different between that 2 fuctions? Because I think they are the same things , they were separated in shetch up ...
Great great great video!
I've been struggling for so long trying to do a barn table with a similar leg profile.
That copy/rotate trick of yours is just so well thought!
Keep on going!
Awesome! Glad you found it helpful!
Justin, You are the best.
I've learned so much from our video's. They are exceed anything else I've seen so far.
Best Regards
Thanks Antonio! Really glad you're finding them helpful!
You are a wonderful teacher !! Thanks
Thanks for all your work putting these videos together. For me, it would have been helpful for you to go into a little more detail regarding using the rotate tool and the referencing you used. Also possibly an alternative method for the same result. Great vid!
Obviously I'm a little behind on my response to this - hope you liked the video I did on it :)
I've gotten to the point that i'm rotating the first leg, but when i select it and rotate 90 degrees, it doesn't line up with the first leg at all. I've used the midpoint references on the edge of the seat and in the middle of it, but it won't line up. any ideas why? EDIT: nevermind. I was clicking on the edge instead of the center of the seat so it was off by a half inch
Thanks a lot for this tutorial. Do you have other video modeling tapered legs? Could be for a chair, cabinet or table.
I don't believe so, sorry
am a newbie... jaw dropped seeing this!
Awesome - glad you liked it!
Thanks so much for the helpful tutorial!
Thanks for watching!
For practical modeling is there a way to put two angles on one leg using the push pull tool I didn't see the angle change in the base of the leg
very helpful video thanks
thankyou
Holy cow! you got yourself a new aprentice
This video will improve my efficiency....thanks so much.
Hi Jim - glad it helped you. Thanks for watching!
Still relevant. Wow!
I downloaded SU 2022 Pro and trying to recreate this stool. Drawing the seat, legs no problem. but I cant rotate and copy the leg. I select the leg , use the rotate to set the rotation but it does not move the leg?
This was super helpful and made my life a lot easier! However, I'm having a problem flaring out the edges, when I select the move tool it only wants to go along the blue axis and I can't figure out how to get...access to the other axes. :) I do have the bottom of the legs selected as well. Thank you!
Tap the left of right arrow keys when the move tool is active - I think that will allow the geometry to move into autofold mode
Your techniques are superior. I hope you made a video covering
ANGLING SQR TUBES.. Thanks!
You mean angling square tubes?
Exactly … angle sqr TUBE, following center-line.
Excellent! Very helpful
Thanks Gernot!
thankyou so much. its very useful
Glad you liked it!
I find 1001bit tools great for bevels and rounded corners, it is very useful, saves time on plenty of details. Thanks for the tutorial.
I'm planning on checking that one out and doing some tutorials on it in the coming weeks. Thanks!
Hope this isn't too late. I'm just finding these videos recently and going through the ones that interest me...Oscar is right, there are extensions to do fillets quickly and easily. 1001 bit tools is one, Tig also has '2d tools' which can do fillets plus so much more.
Right clicking no longer enables you to create a component. Can you tell me the new way? Thanks for the video!
Press 'G'
im watch this because im very new and wanted to know 2 things how to have bevels or angled legs but i cant figure out how to save and rotate , rotate yes but you didn't explain how to save ....i have a mac and a pd> thanks pat
I had an idea:
I tried to use Scale to shrink down the cross piece after I made it so I could move it up. It scaled it down (because the angles made it a pain in the butt...) but I couldn't snap to the edge of the stool leg. Why won't it snap to things?
When I make it a component it will not move on an angle, it only moves side ways, is there something I'm doing wrong? I had to make it a non-component and do it all manually.
I can't seem to flare out the legs using the Move tool. It seems every time I try, the cursor locks onto an edge or a face.
Can you help me?
Model your chair away from edges and faces? Or hide them?
I am on a mac, and using sketchup for schools. tapping the control key doesn't seem to make copies, and it isn't clear to me how to get the rotate tool to "grab" the leg
Try the "command" key - I don't use a Mac, but I think that's right
Instead of rake and splay by inches can it be dome by degrees?
You can use the protractor tool to establish a new guide line at whatever angle you want, using the outer top edge of the leg as a reference point, and then move the bottom face of the leg outward to touch the guide line you created.
I want to understand that "make component" and "make group" 2 fuctions , what's different between that 2 fuctions? Because I think they are the same things , they were separated in shetch up ...
This video should give you a bit of an idea - ua-cam.com/video/Dp3AAhrYbpw/v-deo.html
I need your help
how do you move that chair into the room?
Use the move tool?
IS THE BOTTOM FLAT? or was it in an angle?
Should be
can i know how to just select the bottom?
The bottom of what?
@@Thesketchupessentials The bottom face of the leg, since that is what you were moving to make it flare out.
what's the meaning type times 3 ?
"*3"
thank you very much! ^^
I can't do *3 in my laptop pls help
Not enough information
Type 'x3' instead.
0:50 Why does it do this???! 😣
Pleease Sr translate into hindi
To hard