Solidworks tutorial Chain and Sprocket Part1
Вставка
- Опубліковано 25 лип 2016
- in this tutorial i will sketch inner and outer chain and assemble at the end in solidworks. i hope you will enjoy.
Thanks for Watching.
AMAZON INDIA
3Dconnexion 3DX-700028 SpaceNavigator 3D Mouse
amzn.to/2xGprwt
3Dconnexion 3DX-700043 SpaceMouse Wireless
amzn.to/2iSTC07
SpaceNavigator Notebooks USBF/ NOTEBOOKS USB
amzn.to/2wyoCpE
Hermitshell Travel EVA Protective Case Carrying Pouch Cover Bag for 3Dconnexion SpaceNavigator 3D Mouse 3DX-700028 3DX-70034 3DX-70043 Colour: Black
amzn.to/2gBRlWI
Mivi Thunder Beats Wireless Bluetooth Earphones with Stereo Sound and handsfree mic (Gun Metal)
amzn.to/2xH5V3c
TeckNet Pro 2.4G Wireless Mouse,Nano Receiver,6 Buttons,24 Month Battery Life,2400 DPI
amzn.to/2eyVIAW
SOLIDWORKS BOOKS
AMAZON INDIA
Solidworks 2016: A Power Guide for Beginners and Intermediate Users
amzn.to/2x2mJo9
Solidworks 2017: A Power Guide for Beginners and Intermediate Users
amzn.to/2eRLdpr
SOLIDWORKS 2016 BASIC TOOLS
amzn.to/2evb5Hc
SOLIDWORKS 2017 Reference Guide
amzn.to/2wxHvJm
SOLIDWORKS 2016 Reference Guide
amzn.to/2wy6Mmq
Solidworks Simulation 2017 Black Book (Colored)
amzn.to/2iS2oeV
Solidworks Simulation 2017 Black Book
amzn.to/2xGVIUs
SOLIDWORKS Simulation 2016: A Tutorial Approach
amzn.to/2gzQi9E
An Introduction to SOLIDWORKS Flow Simulation 2016
amzn.to/2guzsW6
An Introduction to SOLIDWORKS Flow Simulation 2017
amzn.to/2euX8cj
thanks a lot,how can you doing this without profit, world needing more people like you, keep going ahead
thanks.
Your tutorials are so helpfull.
thanks a lot of sir,,,your every tutorial is very good and inspire mee
Great video and so helpful, Thanks!
Thanks for watching,
thanks for teaching!!
can I ask what does this chain call? such like 428H、528H...etc.
thank you very much. I'm from Viet Nam
Nice tutorial Sir.:)
thanks i hope you enjoyed.
fue largo pero lo consegui MUCHAS GARCIAS DIOS TE BENDIGA
Thanks,
very very help full sir ,,thank you so much sir
Thanks. God bless you.
Sir if possible make video on nx also because u are such a graet taecher tht we have got through you tube
Thanks a lot sir
your tutorial r very good , i hv learned much from these tutorials and today i subscribed it , thanks
Thanks for watching i hope you enjoyed.
This helped me a lot!
Thanks for watching, i hope you enjoyed.
nice this is very helpfull video
Gurtej Bamal thanks,
very nice sir,thank you
thanks
Can you make a video on dynamic chain? This one is a static one or how to convert this one into a dynamic one?
for Dynamic Chain i need solidworks 2015 or above i am using 2014 anyway i will try to upload soon. Thanks for Watching.
How do you calculate the measurements?
Thanks a lot!
Thanks for watching, i hope you enjoyed
Hello CAD CAM TUTORIAL i like your videos. I would like to know if you get INTERFERENCES BETWEEN LINKS or not.
Thanks, you helped me in a college Project.
no its running smoothly while doing assembly watch part 3 for full assembly of chain & sprocket,
can u help me for my chain wheel? and chain also!
so helpful
bro how did u do the calculations for the chain
hey bro i just want to know something if i have the reduction ration and number of teeth and the pitch of the chain almost the needed dimensions of the sprockets and chain "how could i know the perfect center distance?" and the curve down there of the chain is this equal to 2% of the center distance ?! if you have pdf or something for calculation please help me..... thanks in advane
thanks sir
Hi Thank for this tutorial! but I still can't assembly both chain, how you found the error between it?
keep outer path same for both chain.
Hello sir, thanks to your tutorial. But i have problem in minute 7:57. Rebuild errors, cannot create a valid fillet/chamfer because either this filleted/ chamfered face is self-intersecting or its loop is bad. Please give me solution. Thanks
good, thanks
Thanh Nguyen Thanks,
Sir how to get this reflective background in part modeling
Sir i have creat this chain solidworks but i have face problem such as center between 1.7518mm please give me solution of this problem
GOOD
Thanks,
sir plz tell me how to set costing template for India rupee
sir i want to ask why your solidworks appearance and my appearance is so different....
please tell me
For Real view you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.
because this solidworks is 2015
How is the calculation fot the last dimension: 0.4373028?
can u show the chain calculation and can u please tell the chain number u used for the calculation?
we used here 31 number of chain,
the arc connecting the roller diameter is not measured
and sir im asking the chain number like chain 520 or Chain number 25 or 35 according to the ISO or ANSI
its non standard chain,
I appreciate for this tutorial but I really wonder where did you find those measures that makes me sick :D
and can u please send the calculation u followed...because I'm facing problem in making the arc connecting the circles
arc corner distance is measures from side circle center point its around 0.4373028 inch
@@CADCAMTUTORIALBYMAHTABALAM but it says 2.1 what are you doing cant follow
At the 17.43 mark you have a dimension of .300. How was this dimension gotten?
sir urda y hida ma bat kro . plez
I made same 2 same like you but it shows error in assembly like misalignment.
I made correction as you made in dimensions. But this still shows misalignment. What I do???
I have an error after correcting like the video as well, but I was carefully put two of it again to set a right position before doing any mate and it fits perfectly
thanks
All of your tutorial are very helpful, how can I download the free version of the Solidworks software. Pls help
what kind of chain is this?
it is motor bike chain.
+CAD CAM TUTORIAL perfect, thanks a lot for the video!
always welcome i hope you enjoyed,
How to make go kart chassis?
sir teach the advance surface in easier way...
You need reference images to do the work it doesn’t look a bike chain it’s very simple looking chain
Can i get its file to download pleaseeee?????
How to apply mechanics to it
ليش يقيس بالانج in
أريد خطوات هذا التصميم على شكل Pdf
Please keep asking me for further help.
GOOD
plz tell, how we can design a chain for a two different size sprockets?
good
The Cut in last part , where you modified chain assembly is problematic. The dimensions are not correct in here. you modified them later on.
Sir can you please speak the dimensions correctly and clearly its very confusing.
i will send you data to your email id
The dimensions are not correct
Why you dont wanna show that how to calculate measurement for chain just u r doing copy and make video
ntm
Your dimensions are really wrong please check otherwise some people will report your video like me
who use inch in small things like chains xD
what the fuck
Sir,why you make soo much of mistakes in your video.Content is always good but when you commit mistakes that momentum goes off.