Bill, I learned everything from your unbelievable tutorials. Mad skills man, the best. I imagined you were going to do a two piece on this one. I would definitely have. Would have been horrified that I wouldn't be able to get the plug out with so many flats and possible negative angles. You did it! I'm impressed.
Great video Bill. I need to do some more glassing soon, and I always watch your older ones to refresh my memory on the best way to do it. One thing I could never do was the consolidation roller, it would pick up the mat or the mat would slip and the roller would fill with resin and not turn. I used a cut down paint brush and would tamp it down that way.
I used to build fiberglass airplanes, when my parts used to stick like that, I'd used compressed air, from an air compressor and a long tube for blowing things off, worked quite well.
The first thing guys building race cars strip out are perfectly good interiors. A few sell them. Most just bin them. At least this one was sacrificed to a good cause and will live on in the many copies it will generate in life after death.
Great tutorial, as always! I'm looking forward to build a custom go-kart fairing, i've already finished the design on cad! I'm thinking about building firstly an MDF structure, than use expanding foam to build up volume, sculpture it and finish it with bondo; as a die. What do you think about this method? Any suggestions?
Your opinion totally contradicts everyone else's comments on this video. Oh - and have you found a better DIY video on how to copy a car dashboard? Nah.
Definitely would like to get into fiberglass molding/designing, especially for my dash and maybe some wider fenders. Thank you for the tutorial!
i have been following your videos for years. thank you so much for still keeping this youtube channel alive
Bill, I learned everything from your unbelievable tutorials. Mad skills man, the best.
I imagined you were going to do a two piece on this one. I would definitely have. Would have been horrified that I wouldn't be able to get the plug out with so many flats and possible negative angles. You did it! I'm impressed.
Great video Bill. I need to do some more glassing soon, and I always watch your older ones to refresh my memory on the best way to do it. One thing I could never do was the consolidation roller, it would pick up the mat or the mat would slip and the roller would fill with resin and not turn. I used a cut down paint brush and would tamp it down that way.
I used to build fiberglass airplanes, when my parts used to stick like that, I'd used compressed air, from an air compressor and a long tube for blowing things off, worked quite well.
Legend! thank you for sharing your knowledge with us! 🙏🏾
Thanks for that last bit of explanation. That will help me rebuilding parts of my busted dash👍
Love the videos! Master CLASS is right! ... keep up the great work my friend
This man out here wearing red back boots and reaching us a craft that took him years to learn.
I got a bbq from the side of the road the other day….haha… can’t wait to try your Perspex bending! Cheers for your videos!
Always look forward to seeing your latest video Bill.
Another great video. Thanks Bill!
Bill, your videos are always fantastic!!! Thanks for sharing your amazing skill set with us buffoons. Also, I love the music selections in your video.
Hell of a thing Bill! Well done as usual 👍
I really hope that a lesser quality condition dashboard was used as the mold than the one pictured at the beginning.
The first thing guys building race cars strip out are perfectly good interiors. A few sell them. Most just bin them. At least this one was sacrificed to a good cause and will live on in the many copies it will generate in life after death.
Amazing work!
I need to build a custom car heater box and need advice on making a mold and precise materials to use Matt, resin , mold material etc.
PM me via the Facebook links on this channel's home page
@@BillsBuildandRace how do I contact you bill? Your Facebook doesn't have messenger
@@fwucku redlina@bigpond.com
Great tutorial, as always! I'm looking forward to build a custom go-kart fairing, i've already finished the design on cad!
I'm thinking about building firstly an MDF structure, than use expanding foam to build up volume, sculpture it and finish it with bondo; as a die. What do you think about this method? Any suggestions?
I love your videos !!!!
This is fantastic!!!❤
Do you still have this mould??? :)
Yes - and a copy sitting on the shelf.
What year and model is this car from
Main title ???
@@BillsBuildandRace how much it's cost mister
Hi Bill. How do I contact you?
I cannot contact you in facebook due to your settings and I really need your help on this very topic. Please respond..
how to make duraflex fiberglass anti crack sir?
Good post
Location
Your the best
No carbon Bill?
I ran out. Hahhaa!
hoping for a how to video instead i get a lame soundtrack with some background video.
Your opinion totally contradicts everyone else's comments on this video. Oh - and have you found a better DIY video on how to copy a car dashboard? Nah.
Do you have an email to contact you. Love the videos just had a couple questions. Thanks in advance
It's in my ad at the end of the video. There are also Facebook links to me on this channel's home page.
@@BillsBuildandRace sorry I should of waited till the end of the video to comment.
Email will be sent soon. Thanks again