Це відео не доступне.
Перепрошуємо.
Moen High Arc Kitchen Faucet - Repair (Leaking - Bad O-Ring)
Вставка
- Опубліковано 19 сер 2024
- Moen Replacement Parts Here: amzn.to/3iVO0i8
I show you how to repair a bad O-ring which has caused leaking from my Moen High Arc kitchen faucet. This was the first time doing this repair for this particular faucet but was easy.
Get Moen Cartridge Replacement 1224 Here: amzn.to/3tUZA37
#Moen #FixLeakingfaucet #Oringreplacement #MoenFaucet #fixleakyfaucet #fixdrippingfaucet #moenarchfaucet
![[UA] Team Vitality проти NAVI | IEM Cologne 2024](http://i.ytimg.com/vi/wttO1zVRTC0/mqdefault.jpg)
I don't know if you noticed this , but I could not see much of anything you were doing because all I could see ( for the most part ) was the back of your head , hands & arms .
Here's an updated video: ua-cam.com/video/LAK0z1Jk3c0/v-deo.htmlsi=E4YQIRkMeMaj3Vk9
This video was spot on. Others did not explain the nut that must be removed before pulling the spout out.
thanks a lot
I have this faucet and I have been looking for help on how to fix this exact issue so Thank you!
It's a strap wrench. And they put three o-rings in the kit because the kit is universal which will fit other faucet models. Thank you very much for the video!
thank you for your feedback and watching :)
Thanks for the info on the third o-ring, in my kit its metal and I was looking everywhere while I was replacing faucet parts for a place for it to go so I stopped before I started putting on silicone to check this video again and I saw your comment. Thank you KRAZETV for instruction video and Seemore Butts for the added info you both saved me hours of looking around for info.
Thanks for the help. Got it fixed. 🙂 your video was really helpful.
Thanks for the kind words. I know it's an old outdated video- but the good news is I haven't had to change it again yet. When I do I'll make a better video- LoL! thanks for watching! :)
Thanks. A close up of the O ring locations before you swapped them out would have helped even more. I only see one on my faucet.
thanks for the tip David!
Thank you ...very good video!!! Just the one I needed!!!
hahahaha ........ u DIDN'T turn the water on , at the end ,,,i wanted to see the fountain of youth explode ,,,hahahahahahahaahahahaha
Yea it's an old video- haven't had to replace it since though. Sorry - this was my first attempt at fixing this and just thought I would film it. Thanks for watching :)
Next time show us what you’re doing, at least before you reset the faucet.
Hey Robert- I did make a new one changing the cartridges if you want to check that one out here: ua-cam.com/video/LAK0z1Jk3c0/v-deo.html
Ya made sure your chrome was shiny clean, but you didnt show the o rings.. Useless.
he did show ,,,HOW TO GREASE everything tho ,,,,,hahahahahahaa
You can use a pickle jar rubber lid remover instead of the rubber strap wrench. I have done this job several times myself, but I wanted to show a friend how it is done. This video is poorly shot and poorly thought out. People should keep searching for a better made film.
Ye dude, couldn't see if you changed white ring also.
How do u get to video #2?
thanks for showing us how through your transparent hands wow 😟
Anytime! thanks
The connector got stuck inside the cap for me. I can't seem to get it out. Not sure what to do other than order $87 replacement of the whole thing
I got it loose! I screwed it back on and then used the rubber wrench to get the cap off, and off it came. For the first time since buying the place the kitchen sink doesn't gush from the base! Thanks for the video.
Does anyone know what that red and black
tool is called
Thanks for the question- it's called a strap wrench- you can find them here: amzn.to/3cyIUTY
Hope that helps- thanks for watching.
The white Teflon ring is separated as if it either broke vertically, or its supposed to be like that. Any idea?
Did it leak any AFTER you replaced the o-rings?
No John - it hasn't leaked since I replaced it and this video was made over 4 years ago. Thanks for the question and thanks 4 watching!
Holy fawk dood I was wanting to suck start my glock about 2/3 thorough the vid. But you finally got ‘ER dun’.
not really ,, he DIDN'T turn on the water at the end !!!! hahahahahahahaahahahhahaha
What part number for o rings?
I'm not sure- since this was years ago- however find out what model you have and go over to the Moen store on Amazon to find your O-ring here: amzn.to/3SLmHXP I hope this helps. :)
What is the name of that special wrench that you used?
Matt Read thanks 4 watching Matt- it's called a strap wrench or mini strap wrench
Fearless_DoGooder grvfcvccyjugigtrddyuggffuurer eoghh
Worst video yet ! congrats !
Hey Thanks man for the kind words- that's exactly what I was going for- worst video ever!!
isnt the rule that if your going to do a "how to" video that you know what your doing ???
Never miss an opportunity to make a video. Fun things happen when you're inexperienced. Thanks 4 Watching! BTW- I don't follow Rules
hahahahaha ,,,i would hope so ,,,i guess this guy DON'T think so ,,with ur head & hands in the way most of vid ,,,,hahahahahaah
The important parts were hidden by his hands, back of head, never showed the end where the o-ring and white snap ring went, didn't show the new part kit. What was the point of the video?
Only truly useful part was the nut that needed undoing under the spout stem
Otherwise, nothing to see here!
this guy for real ? talking to himself ,no view of what hes doing and rubber gloves . hate to see how long it takes for him to change a light bulb ! just sayin
hes a putz
The second video shows a different style faucet but this first one outlines the work on a dual lever and boast about free moen parts yeah right not for me I am sure. USELESS
thanks 4 watching- but this was my first time. I don't know crap about plumbing. I also made this video- so I can go back and remember what I did in case I have to replace it again.
POOR vid ,,ur hands or head was in the way most of it ,,,,,best part was the lil strap tool u used !!!