How to Install a Honeywell T3 RTH6360D AC Heating Thermostat
Вставка
- Опубліковано 22 лип 2023
- #honeywell #thermostat #acrepair #larrysbrusch #T3PROGROMMABLE
In this video, we'll explain how to install a Honeywell T3 RTH6360D AC Heating Thermostat. This thermostat is a great way to keep your home warm in the winter and cool in the summer.
If you're looking to install a new heating thermostat in your home, then this video is for you! We'll walk you through the process of installing this thermostat, from start to finish. We'll also provide some helpful tips along the way, so that you can get this thermostat installed easily and efficiently!
* - Наука та технологія
That was so helpful, especially on the wiring part for someone who is not an electrician. I made several several trips to Lowe's and Home Depot and couldn't get any help until I ran into your video. Thank you very much.
Glad I could help. Appreciate the comment
Thank you!! Saved my confused self!😂
So well explained, step by step. Thanks!
Thank you, glad i could help
Thanks for creating this!
Great video! Definately a used unit if the mounting bracket was already snapped in and the srcews were loose. Mine came with the mounting bracket in its own little plastic bag and the screws with plastic inserts in another plastic bag. :) This was very helpful!
Glad I could help. Appreciate the comment
Thank you sir! You helped me immensely!
Glad I could help. Appreciate the comment
Thanks for the vid, I just installed mine!
Might wanna mention turning off the breaker(s) that controls the HVAC system.
Thank you for the explanation, well done….now, wish me luck!
Thanks for your video, I just bought exactly thermostat but the time to change my old one I get confused I have 4 wires blue, green black and red. No white wire. The red wire is connect to 2 in scruns. So I'm confused. Any idea to help me
Thanks! I was able to install mine with success.
Glad I could help
Good lord.
I'm glad you made the video. I was about to pull my hair out. Very helpful 👌
Glad I could help
The wires go in from the side, not rom the front. Check your manual. It shows clearly the wires bring inserted form the side of the bracket cavity.
I didn't want a digital therm. But couldn't find a two stage heat therm. Didn't want batteries in either. But honeywell tech says i can bypass this ??? I only have 3 wires coming from my two stage propane tube radiant heater. Any help ? I know i need w1 and w2 to run it two stage. What about the 24v wire for power?
Hi, thank you for this video it really helped! Any idea why the time shown above “following schedule” would keep going up?
Not sure I understand your question, it should follow whatever you put in on a schedule
@@LarrySbrusch Hi I think when I was programming the temperatures I may have set them a little to high which is probably resulting in the time shown above where it says “following schedule” to keep going up. I guess the thermostat is estimating how long it will take the temperature to get to the number I programmed it for. Sorry for the confusion
Great video. Thank you.
I have just 2 wires old house replacing an old mercury thermostat.
Question is where would I place the two wires as color is not optional for me?
Thank you.
To make it easy for yourself, buy the thermostat just like you currently have.I would try to help you, but without a diagram, it is very difficult
@LarrySbrusch Thank you for your reply.
On or Off. Heat or Cool. I’m old & home most of the time. Don’t need, want or understand all this programming BS. Is there any way to use this manually, as & when I choose?
Followed all these instructions in this video and the manual. Still no heat turning on. Our old thermostat was working and the heat turns on but the heat wasn’t increasing to the set temperature.
What kind of old thermostat did you have
the little side clips aren't going back into place??
Sorry, but I don’t follow you
I set up the thermostat wiring is correct but my heat won’t turn on at all help?
Did you figure it out? Ours won't turn on either. 😊
Hi, my thermostat is not set up on a schedule. I can’t find the heat button
Depends what kind and type of thermostat you have. Some automatically sense heat and ac , and then I have seen a few in mobile home that do not control the heat at all. It all depends which one you have. Mine is on the bottom of it
Clicking + does not switch to SS in my 6360
If you have the same thermostat and following the video.. You may have a bad thermostat..
@@LarrySbrusch Found out what I did wrong. I needed to reset it and in doing so, selected item #2 in the #120 folder. Now I can have two categories #120 switches to #2 so that I can use two categories: MTWTF and SS.
@@Parture Good to know. Glad you figured it out.. Happy Holidays
No, no! The wires enter from the side, If you try and put them in from the front, they will not stay in place and it will be very difficulr to close the mounting bracket door. I made the same mistake until I read the instructions more carefully.
I just want a bloody thermostat that all it requires is turn on and off and set the degrees for cool or hot.
They have made it so difficult. I'm a tenant and no, I don't give a flip what my landlord like the temperature to be. I pay for the electric bill so let me set it up. )*E^T%$(&%w